Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1SET111004R0000 features stranded construction with polypropylene insulator, suitable for discrete wire applications. With a max operating temp of 105°C, it supports 18 AWG wire gauge and straight mounting style.
Median Price
$0.070
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
TE Connectivity
1+ parts
100+ parts
$0.060
1k+ parts
10k+ parts
Master Electronics
-
$0.028
Verical
$0.082
Nova Conductors
$0.230
VNN
Electro Sonic
TME
$0.099
Vyrian
Semicontronic
$0.023
$0.022
Continental Prestige Electronics
$0.225
Argo Parts USA
$0.223
Netroflash
$0.219
$0.214
Advanced Electronics
$2.159
$2.051
Aztec Data Supply Inc.
$4.556
Stranded construction provides flexibility and resistance to breakage, making this product durable and long-lasting.
Polypropylene is a reliable insulating material that offers excellent electrical insulation and resistance to heat, making this product safe for various applications.
With a high maximum operating temperature of 105°C, this product can withstand high temperatures without compromising its performance.
The 18 AWG wire gauge ensures efficient electrical conductivity and compatibility with various devices and systems.
Being able to accommodate up to 18 AWG wire sizes, this product offers versatility and flexibility in wiring configurations.
Designed for discrete wire applications, this product ensures secure connections and reliable performance in various wiring setups.
The straight mounting style simplifies installation and ensures a neat and organized wiring setup, making this product user-friendly and efficient.
Assembly Products 1SET111004R0000 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Cable Types:
Connector Accessory Type:
Construction:
Insulator Material:
Mounting Style:
Maximum Operating Temperature:
Wire Gauge (AWG):
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
Grande Electronics
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
Meritek Electronics
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
936010822
Molex
CONNECTOR ACCESSORY;
1735801-1
TE Connectivity's 1735801-1 CONTACT is a FEMALE signal connector with rated voltage of 250V and current of 3A. It supports wire gauge from 30 to 24 AWG, operating temperatures from -25 to 105 °C, and is ideal for applications requiring DISCRETE WIRE connections like part numbers 1735447 and 2041423.
1060-16-0622
TE Connectivity 1060-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 AWG to 16 AWG, rated for 13A current. Ideal for applications requiring male gendered contacts and straight mounting style.
1062-12-0166
TE Connectivity's 1062-12-0166 is a CRIMP terminal with stamped contact design. It supports wire gauge 12 AWG, rated for 25A current, and operates b/w -55 to 125 °C. Ideal for applications requiring female round pin-socket contacts in straight mounting style.
50394-8052
Molex 50394-8052 is a crimp terminal with chain contact design, suitable for assembly products. It supports wire sizes from 30 AWG to 24 AWG and has a max cable entry of 0.055". The bellowed contact is made of phosphor bronze, ideal for applications requiring female contacts in straight mounting style.
43030-0011
The Molex 43030-0011 is a female crimp contact with a round pin socket design, suitable for use in receptacle assemblies. It supports wire sizes from 26 AWG to 30 AWG and features a 0.138 inch terminal length. This assembly product is made of phosphor bronze and has a max cable entry of 0.05 inch, ideal for straight mounting applications.
1SNK900103R0000
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel; Wire Gauge (AWG): 0; Insulator Material: POLYAMIDE; Maximum Wire Size: 0 AWG;
5013340000
Molex 5013340000 CONTACT for 501330, 104050 with CRIMP terminal type. Signal design made of PHOSPHOR BRONZE, FEMALE contact gender. Supports wire sizes from 32 AWG to 28 AWG, rated for 1A current with 0.0315" cable entry.
W3P
W3P by TE Connectivity is an Assembly Product for DT SERIES. It features a Max Operating Temperature of 125°C and Min Operating Temperature of -55°C. With a Max Wire Size of 0 AWG, it is designed for POWER AND SIGNAL applications using POLYBUTYLENE TEREPHTHALATE material.
3022218
Phoenix Contact
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END CLAMP; IEC Conformity: NO; Approvals (V): UL; MIL Conformity: NO;
205089-1
TE Connectivity's 205089-1 CONTACT is a male signal round pin-socket designed for AMPLIMITE usage. It features a copper alloy construction, crimp terminal type, and can handle wire sizes from 24 to 20 AWG with a rated current of 7.5 A. Operating temperatures range from -55 to 125°C, making it suitable for various assembly applications.
5-66506-3
TE Connectivity 5-66506-3 is a male signal contact with brass material. It has a finish thickness of 30, supports wire gauge up to 20 AWG, and operates b/w -55°C to 105°C. Ideal for applications requiring crimp terminals with 0.05" to 0.06" cable entry.
M23053/5-106-9
Dunbar Products
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO;
AT06-2S-CAP
Amphenol
4-745287-7
TE Connectivity 4-745287-7 CONTACT features SOLDER terminals, BRASS material, and SIGNAL design. With a max wire size of 0 AWG and rated current of 3.1 A, it is ideal for MALE connectors in applications requiring a temp range from -55 to 105 °C.
D20419-18
Itt Cannon
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Material: STEEL; Contact Gender: MALE; MIL Conformity: NO; Assembly Item Name: HARDWARE-MALE SCREWLOCK;
5-1532137-9
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: YES; Manufacturer Series: 1532137; DIN Conformity: NO; Assembly Item Name: JACKPOST KIT;
249-119
Wago
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MARKER CARRIER; IEC Conformity: NO;
90119-0109
Molex 90119-0109 CONTACT features CRIMP terminal type, suitable for 24-22 AWG wires. Made of PHOSPHOR BRONZE with 0.168" length, it has FEMALE gender and SQUARE PIN-SOCKET style. Ideal for applications requiring 0.04-0.058" cable entry, such as assembly products needing a STRAIGHT mounting style.
114017
TE Connectivity 114017 is a male contact sealing item designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG in thermoplastic material. Ideal for assembly products requiring reliable connections in various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1SET111001R0000
TE Connectivity's 1SET111001R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports 22 AWG wire gauge, up to 105°C operating temperature. Ideal for DISCRETE WIRE applications, featuring STRAIGHT mounting style.
1SET111005R0000
TE Connectivity's 1SET111005R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 17 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C, it offers reliable performance in various straight mounting setups.
1SET111009R0000
TE Connectivity's 1SET111009R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C and STRAIGHT mounting style, it ensures reliable connections in various setups.
1SET111002R0000
TE Connectivity's 1SET111002R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 20 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C and STRAIGHT mounting style, it ensures reliable connections in various setups.
1SET111003R0000
TE Connectivity 1SET111003R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 18 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C, it features a STRAIGHT mounting style.
1SET111007R0000
TE Connectivity's 1SET111007R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temperature of 105°C, it offers reliable performance in various straight mounting setups.
1SET111008R0000
TE Connectivity's 1SET111008R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge and operates at max 105°C temperature. Ideal for applications requiring DISCRETE WIRE connections with STRAIGHT mounting style.
1SET111006R0000
TE Connectivity's 1SET111006R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 17 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C, it offers reliable connections in various industries.
1SET111012R0000
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 105 Cel; Mounting Style: STRAIGHT; Wire Gauge (AWG): 14; Insulator Material: POLYPROPYLENE; Construction: STRANDED;
1SET111013R0000
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 12 AWG; Maximum Operating Temperature: 105 Cel; Mounting Style: STRAIGHT; Construction: STRANDED; Wire Gauge (AWG): 12;
1SET111015R0000
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 12 AWG; Wire Gauge (AWG): 12; Cable Types: DISCRETE WIRE; Construction: STRANDED; Insulator Material: POLYPROPYLENE;
1SET111016R0000
TERMINAL BLOCK ACCESSORY; Mounting Style: STRAIGHT; Maximum Operating Temperature: 105 Cel; Wire Gauge (AWG): 10; Construction: STRANDED; Cable Types: DISCRETE WIRE;
1SET111017R0000
TERMINAL BLOCK ACCESSORY; Mounting Style: STRAIGHT; Maximum Operating Temperature: 105 Cel; Construction: STRANDED; Maximum Wire Size: 10 AWG; Wire Gauge (AWG): 10;
1SET111019R0000
TERMINAL BLOCK ACCESSORY; Construction: STRANDED; Cable Types: DISCRETE WIRE; Maximum Operating Temperature: 105 Cel; Insulator Material: POLYPROPYLENE; Wire Gauge (AWG): 8;
1SET111022R0000
TERMINAL BLOCK ACCESSORY; Mounting Style: STRAIGHT; Construction: STRANDED; Maximum Operating Temperature: 105 Cel; Insulator Material: POLYPROPYLENE; Cable Types: DISCRETE WIRE;
1SET111024R0000
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 105 Cel; Insulator Material: POLYPROPYLENE; Wire Gauge (AWG): 2; Cable Types: DISCRETE WIRE; Mounting Style: STRAIGHT;
1SET111026R0000
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 105 Cel; Mounting Style: STRAIGHT; Insulator Material: POLYPROPYLENE; Construction: STRANDED; Maximum Wire Size: 22 AWG;
1SET111027R0000
TERMINAL BLOCK ACCESSORY; Construction: STRANDED; Maximum Operating Temperature: 105 Cel; Cable Types: DISCRETE WIRE; Mounting Style: STRAIGHT; Wire Gauge (AWG): 18;
1SET111038R0000
TERMINAL BLOCK ACCESSORY; Cable Types: DISCRETE WIRE; Maximum Operating Temperature: 105 Cel; Maximum Wire Size: 8 AWG; Wire Gauge (AWG): 8; Mounting Style: STRAIGHT;
1SET111040R0000
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYPROPYLENE; Wire Gauge (AWG): 6; Maximum Wire Size: 6 AWG; Construction: STRANDED; Cable Types: DISCRETE WIRE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved