Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Panduit FSD81-12-C ferrule with POLYPROPYLENE insulator, CSA approved for 12 AWG wire. DIN conformity, cable entry up to 0.19 inch. Ideal for electrical assembly applications.
Median Price
$0.462
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.416
100+ parts
-
1k+ parts
$0.362
10k+ parts
$0.326
RS (Exports)
$0.440
$0.377
$0.319
Heilind Electronics
$0.449
$0.374
$0.351
Newark
$0.506
$0.461
Element14
$0.748
Farnell
$1.620
RS Americas
$44.560
Verical
$0.474
$0.413
TTI
$0.348
$0.308
$0.296
NEP Electronics
$0.280
$0.260
Nova Conductors
$0.330
Carlton-Bates
$0.360
Vyrian
IBS Electronics
$0.516
$0.421
Electro Sonic
$0.333
$0.285
Bisco
EMSNET
Aranea Global
$0.323
$0.310
Argo Parts USA
$0.320
Continental Prestige Electronics
$0.407
$0.372
$0.335
Ampacity Inc.
$0.520
Aztec Data Supply Inc.
$3.355
Corohmni
$4.923
Allen Electronics Distributors
$42.350
Authorized Procurement Solutions
This product has CSA approval, ensuring it meets safety and quality standards set by the CSA, making it a reliable choice for assembly projects.
The insulator material used in this product is polypropylene, which provides excellent electrical insulation properties, ensuring safe and reliable performance.
Conforming to DIN standards ensures that this product meets the requirements of the German Institute for Standardization, ensuring compatibility with a wide range of applications.
Being a ferrule, this product is designed to provide a secure connection for wires, enhancing the durability and reliability of the assembly.
With a maximum wire size of 12 AWG, this product can accommodate a wide range of wire gauges, providing flexibility in assembly projects.
The maximum cable entry size of 0.19 inch allows for easy installation of cables, making the assembly process more convenient and efficient.
Assembly Products FSD81-12-C attributes and parameters. Explore more Assembly Products devices from Panduit
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
Insulator Material:
MIL Conformity:
Maximum Wire Size:
FSD81-12-C Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Although the world has dramatically changed since our story began in 1955 when our founder Jack E. Caveney invented the Panduct wiring duct in his garage, our spirit of discovery and can-do attitude have remained. Choosing to innovate rather than imitate, we continue to create leading-edge physical electrical and network infrastructure solutions across a wide spectrum of business environments. As a customer-focused company, we pride ourselves on creating a continuous flow of new products, software, and solutions designed to help you achieve your business goals. By partnering with Panduit, you can develop your connectivity strategy on a foundation that ensures scalability, accuracy, security, and reliability, so you can build for long-term growth.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
Eic Semiconductor
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
1552200253
Molex
WIRE AND CABLE;
SSH-003GA-P0.2-H
J S T Mfg
J S T Mfg's SSH-003GA-P0.2-H is a CRIMP terminal CONTACT with 32-28 AWG wire size range, rated for 1A current at 50V AC/DC. With approvals from CSA and UL, it operates b/w -25 to 85 °C, ideal for applications requiring FEMALE contacts in straight mounting style.
08-70-1039
The Molex 08-70-1039 is a crimp terminal contact with chain design, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a min cable entry of 0.0452" and max cable entry of 0.0748", ideal for applications requiring female contacts in straight mounting style.
33012-2001
The Molex 33012-2001 is a CRIMP terminal CONTACT for MX150 CONNECTOR, with operating temperatures from -40 to 105 °C. It supports wire sizes from 16 to 14 AWG, rated at 22A and 500V DC. The FEMALE contact has a resistance of 8 mohm, made of COPPER ALLOY for STRAIGHT mounting applications.
43031-0003
Molex 43031-0003 CONTACT features CHAIN design, PHOSPHOR BRONZE material. Supports wire sizes 24-20 AWG with 0.073" cable entry. Ideal for 43020, 43640, and 44300 applications requiring male contacts in straight mounting style.
Z80-280
Harwin Plc
TOOL AND MACHINERY;
SSH-003T-P0.2
J S T Mfg's SSH-003T-P0.2 is a CRIMP terminal CONTACT with PHOSPHOR BRONZE material. It supports 32-28 AWG wire sizes, 0.4-0.8 inch cable entry, and MALE gender for STRAIGHT mounting. Ideal for applications requiring precise wire connections in assembly products.
502579-0000
The Molex 502579-0000 is a male compression contact designed for signal applications. It has a rated current of 2A and can accommodate wire sizes from 24 to 28 AWG. This assembly product is commonly used with the 502578 housing for crimp terminals with a min cable entry of 0.031 inch.
16-02-0109
CONNECTOR ACCESSORY;
AWP-4S
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: WEDGE LOCK; Usage: ATP06; DIN Conformity: NO; Material: POLYETHYLENE;
DF19A-2830SCFA
Hirose Electric
DF19A-2830SCFA by Hirose Electric is a female contact with 30-28 AWG wire size range. Made of phosphor bronze, it has a 0.079" terminal length and straight mounting style. Ideal for assembly products requiring precise connections in various applications.
DF11-2428SCFA
DF11-2428SCFA by Hirose Electric is a crimp terminal with bellowed contact style. Rated for 2A at 250V, it supports wire sizes from 28 to 24 AWG. Ideal for DF11 applications, it has UL approval and operates b/w -30°C to 85°C.
33001-3004
Molex 33001-3004 CONTACT features CRIMP terminal type for 20-18 AWG wire sizes. FEMALE gender, BELLOWED TYPE contact style with STRAIGHT mounting. Ideal for assembly products requiring 30 finish thickness in various applications.
350218-1
TE Connectivity
TE Connectivity 350218-1 is a universal mate-n-lok plug and cap housing with crimp terminal type. It has a rated voltage of 600V, rated current of 19A, and wire gauge of 14AWG. Ideal for power applications, it features stranded construction, brass material, and approvals from CSA, UL, VDE.
1-66103-4
TE Connectivity 1-66103-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for 20-24 AWG wires with 0.6 mm2 cross-section area. With a rated current of 13A, it operates b/w -55 to 150°C, making it ideal for power and signal applications.
SVH-21T-P1.1
SVH-21T-P1.1 by J S T Mfg is a VH series connector with crimp terminal type, rated for 250V AC/DC and 7A current. It has approvals from CSA, TUV, and UL, with operating temperatures ranging from -25°C to 85°C. Ideal for applications requiring a female contact gender and wire sizes b/w 22-18 AWG.
43031-0001
Molex 43031-0001 CONTACT features CHAIN design, PHOSPHOR BRONZE material, and 0.073" cable entry. Ideal for 24-20 AWG wires in assemblies like 43020, 43640, and 44300.
MTCB2X-205-XXX
TE Connectivity's MTCB2X-205-XXX is an Assembly Product with a max operating temp of 125°C and min of -65°C. It supports up to 0 AWG wire size, rated for 1.5A current, designed for ROUND WIRE applications with MALE contact gender using POLYARYLENE/POLYETHYLENE material.
M80-0130005
The Harwin PLC M80-0130005 is a CRIMP terminal with operating temperatures ranging from -55°C to 125°C. It features a rated current of 3A, suitable for wire sizes b/w 28-24 AWG. This FEMALE contact with ROUND PIN-SOCKET design in BRASS material is ideal for SIGNAL applications requiring a STRAIGHT mounting style and 0.043" cable entry.
206966-1
CONNECTOR ACCESSORY; Material: THERMOPLASTIC; Assembly Item Name: CLAMPING ITEM; Maximum Cable Entry: .453 inch;
1061200000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; Approvals (V): UL; Material: GLASS FILLED PA66; MIL Conformity: NO; Maximum Operating Temperature: 120 Cel; Assembly Item Name: END BRACKET;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSD80-8-DSL6
Panduit
TERMINAL BLOCK ACCESSORY; Approvals (V): CSA; IEC Conformity: NO; Maximum Wire Size: 14 AWG; DIN Conformity: YES; MIL Conformity: NO;
FSD80-8-D
Panduit's FSD80-8-D ferrule has CSA approval, made of polypropylene, and conforms to DIN standards. It supports up to 14 AWG wire size with a max cable entry of 0.17 inch. Ideal for electrical assembly applications requiring reliable insulation and secure wire connections.
FSD80-12-D
TERMINAL BLOCK ACCESSORY; DIN Conformity: YES; Maximum Cable Entry: .17 inch; Maximum Wire Size: 14 AWG; Assembly Item Name: FERRULE; IEC Conformity: NO;
FSD82-12-C
Panduit's FSD82-12-C ferrule has CSA approval, DIN conformity, and polypropylene insulator. It supports up to 10 AWG wire with a 0.24" cable entry. Ideal for electrical assembly applications.
FSD80-18-D
TERMINAL BLOCK ACCESSORY; DIN Conformity: YES; IEC Conformity: NO; Assembly Item Name: FERRULE; Approvals (V): CSA; MIL Conformity: NO;
FSD84-12-C
Panduit FSD84-12-C ferrule has CSA approval, DIN conformity, and insulator made of polypropylene. It supports up to 6 AWG wire size with 0.35" cable entry. Ideal for electrical assembly applications.
FSD84-18-C
TERMINAL BLOCK ACCESSORY; Assembly Item Name: FERRULE; Approvals (V): CSA; Insulator Material: POLYPROPYLENE; MIL Conformity: NO; IEC Conformity: NO;
FSD83-12-C
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Insulator Material: POLYPROPYLENE; DIN Conformity: YES; IEC Conformity: NO; Maximum Cable Entry: .3 inch;
FSD82-18-C
TERMINAL BLOCK ACCESSORY; Approvals (V): CSA; MIL Conformity: NO; Insulator Material: POLYPROPYLENE; Assembly Item Name: FERRULE; IEC Conformity: NO;
FSD81-10-D
TERMINAL BLOCK ACCESSORY; Assembly Item Name: FERRULE; Maximum Cable Entry: .19 inch; Insulator Material: POLYPROPYLENE; MIL Conformity: NO; Approvals (V): CSA;
FSD85-18-L
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 4 AWG; MIL Conformity: NO; Assembly Item Name: FERRULE; IEC Conformity: NO; Approvals (V): CSA;
FSD86-16-L
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: YES; Assembly Item Name: FERRULE; Maximum Wire Size: 2 AWG; Insulator Material: POLYPROPYLENE;
FSD81-18-C
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Maximum Wire Size: 12 AWG; Insulator Material: POLYPROPYLENE; Assembly Item Name: FERRULE; Maximum Cable Entry: .19 inch;
FSD83-18-C
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 8 AWG; Approvals (V): CSA; Maximum Cable Entry: .3 inch; MIL Conformity: NO; IEC Conformity: NO;
FSD85-16-L
TERMINAL BLOCK ACCESSORY; Assembly Item Name: FERRULE; Approvals (V): CSA; Maximum Wire Size: 4 AWG; IEC Conformity: NO; MIL Conformity: NO;
FSD86-18-L
TERMINAL BLOCK ACCESSORY; Assembly Item Name: FERRULE; Maximum Wire Size: 2 AWG; MIL Conformity: NO; IEC Conformity: NO; Insulator Material: POLYPROPYLENE;
FSD86-25-L
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 2 AWG; MIL Conformity: NO; Maximum Cable Entry: .49 inch; Assembly Item Name: FERRULE; Insulator Material: POLYPROPYLENE;
FSD81-10
TERMINAL BLOCK ACCESSORY; Material: COPPER; Maximum Cable Entry: .19 inch; Additional Features: TIN PLATED; Assembly Item Name: FERRULE; Maximum Wire Size: 12 AWG;
FSD81-12
TERMINAL BLOCK ACCESSORY; Material: COPPER; Maximum Cable Entry: .19 inch; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO;
FSD81-18
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 12 AWG; Maximum Operating Temperature: 105 Cel; Approvals (V): CSA; CUL; UL; Maximum Cable Entry: .19 inch; Additional Features: TIN PLATED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved