Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NUF4105FC by Onsemi is a data line filter with 15 terminals, offering 120 ohm DC resistance and 40 dB attenuation at min frequency. It operates b/w -40 to 85 °C, with dimensions of 2.96mm x 1.33mm x 0.7mm. Ideal for applications requiring surface mount filters with high output impedance and capacitance of 53 uF.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
TANS Electronics
Problanco Electronics
Kulean Microsystems
Corphita
UHIMA Technologies
Corohmni
SupplyDigital Components
Having 15 terminals allows for versatile connections and compatibility with various devices and applications.
The data line filter helps in reducing electromagnetic interference and noise on data lines, ensuring cleaner and more reliable data transmission.
With a high maximum operating temperature, this filter can withstand heat and operate efficiently in challenging environments.
The low minimum operating temperature ensures that the filter can also function in cold conditions without any performance issues.
The slim width allows for space-saving installation and integration into compact electronic devices.
The low resistance helps in maintaining signal integrity and reducing losses in data transmission.
The compact length is suitable for applications where space is limited, making it easy to incorporate this filter without occupying much area.
The output impedance of 120 ohm matches standard data line requirements, ensuring compatibility with a wide range of devices and systems.
Surface mounting type simplifies the installation process and provides a secure connection, making it ideal for modern electronic designs.
The high attenuation at the minimum frequency helps in effectively filtering out unwanted signals and noise, improving data quality.
The use of plastic as the package material offers durability and lightweight properties, making the filter suitable for portable and consumer electronics.
The low height profile makes this filter unobtrusive and ideal for applications where space constraints are a concern.
The capacitance value of 53 uF helps in filtering out high-frequency noise and fluctuations, ensuring a stable and clean power supply for connected devices.
Data Line Filters NUF4105FC attributes and parameters. Explore more Data Line Filters devices from Onsemi
Attenuation At Minimum Frequency:
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Width (mm):
NUF4105FC Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
Bytesonic Electronics
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tesla Elektronicke Soucastky
BAV99-7-F
Multicomp Pro
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
BLM18AG601SN1B
Murata Manufacturing
Murata's BLM18AG601SN1B is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.38 ohm and operates b/w -55°C to 125°C. This ferrite chip filter has an output impedance of 600 ohm and is rated for a current of 0.5A, making it suitable for noise suppression in circuits up to 100MHz frequency range.
744232222
Wuerth Elektronik & Kg
Wurth Elektronik 744232222 is a Data Line Filter with 2 functions, rated at 50V. It has 4 terminals and operates b/w -40 to 125°C. With dimensions of L3.2xB1.6xH1.9 (mm), it offers an output impedance of 2200Ω and max DC resistance of 1.2Ω, suitable for surface mount applications in various electronic devices.
MPZ2012S601AT000
TDK's MPZ2012S601AT000 is an 0805 chip bead filter with a ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for data line filtering applications due to its compact size and high rated current of 2 A.
744226S
744226S by Wurth Elektronik is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 10uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.08 ohm, and an output impedance of 920 ohm. This surface mount filter is ideal for applications requiring noise suppression in data lines.
742792655
The Wurth Elektronik 742792655 is a data line filter with a multi-layer construction. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is suitable for applications requiring a frequency range of 100 MHz to 600 MHz.
74279206
Wurth Elektronik 74279206 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a max operating temperature of 125°C and min frequency of 100 MHz. With dimensions of L2.0XB1.2XH0.9 (mm), it offers an output impedance of 30 OHM and rated current of 3 A, making it ideal for surface mount installations in electronic circuits.
MMZ1608Y102BTA00
TDK MMZ1608Y102BTA00 is a 0603 chip bead filter with max operating temp of 125°C and min of -55°C. With dimensions L1.6xB0.8xH0.8 (mm), it has a DC resistance of 0.5 ohm and output impedance of 1000 ohm, suitable for data line filtering applications.
BLM21PG600SN1D
Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.
FBMH4532HM132-T
Taiyo Yuden
FBMH4532HM132-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, rated for 3A current. Featuring ferrite construction, it offers an output impedance of 1300Ω and operates b/w -40°C to 85°C. Ideal for surface mount applications, this filter measures L4.5xB3.2xH3.2mm and is designed for frequencies ranging from 100MHz with a max DC resistance of 0.06Ω.
BLM21PG221SN1
Murata Manufacturing's BLM21PG221SN1 is a FERRITE CHIP filter with 2 terminals, rated for 2A current. With dimensions of L2.0XB1.25XH0.85 (mm), it offers an output impedance of 220 ohm and max DC resistance of 0.05 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C in surface mount configurations.
BLM21AG102SN1D
Murata Manufacturing's BLM21AG102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C, offering 0.28 ohm DC resistance and 1000 OHM output impedance at 100 MHz. Ideal for data line filtering applications, it measures L2.0XB1.25XH0.85 mm and has a rated current of 0.5 A.
ACT45B-510-2P-TL
TDK's ACT45B-510-2P-TL is a 2-function data line filter with 10 Mohm insulation resistance, 51 uH inductance, and -40 to 150 °C operating temperature range. Ideal for AEC-Q200 applications requiring a rated voltage of 50 V and 0.2 A current.
ACM2012-900-2P
TDK's ACM2012-900-2P is a 2-function data line filter with 4 terminals, rated voltage of 50V, and max operating temp of 85°C. Ideal for surface mount applications, it offers 0.19 ohm DC resistance, 0.4A rated current, and output impedance of 90 ohm.
M-FIAM9H21
Vicor
Vicor's M-FIAM9H21 is a 36V, 18A data line filter module with 9 terminals. Operating from -40 to 100°C, it features TIN LEAD finish and panel mount design. Ideal for applications requiring high current filtering in limited space.
PA4339.501NLT
Pulse Electronics
PA4339.501NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 4uH and operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with a max current rating of 5A.
LI0805H121R-10
Laird Technologies
LI0805H121R-10 by Laird Technologies is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min frequency of 25 MHz. This filter is commonly used in applications requiring noise suppression in data lines.
BLM31PG601SN1L
BLM31PG601SN1L by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L3.2xB1.6xH1.1 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.
ECLAMP2422N.TCT
Semtech
Semtech's ECLAMP2422N.TCT is a 5V data line filter with 2 functions and 6 terminals. It operates b/w -40°C to 85°C, offering 0.003uH inductance and 100uF capacitance. Ideal for IEC-approved applications requiring surface mount filters with dimensions of L1.45xB1.0xH0.58mm.
2508056017Y0
Fair-rite Products
Fair-rite Products' 2508056017Y0 is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring ferrite chip construction, it offers a frequency range of 100-1000 MHz and an output impedance of 600 ohm. With dimensions of L2.0xB1.25xH0.9 mm, it operates b/w -55 to 125 °C for noise suppression in electronic circuits.
W2F15C2228AT1F
KYOCERA AVX
KYOCERA AVX's W2F15C2228AT1F is a data line filter with 3 terminals, rated voltage of 50V, and capacitance of 2200uF. It features FEED THROUGH CAPACITOR type filtering for applications requiring insulation resistance of 1000 Mohm and operating temperatures from -55 to 125 °C. Ideal for surface mount installations in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NUF4001MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Maximum Attenuation Frequency: 800 MHz; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT; Additional Features: CUT-OFF FREQUENCY AT 150 MHZ; PI-TYPE CIRCUIT;
NUF4401MNT1G
NUF4401MNT1G by Onsemi is a data line filter with 4 functions and a rated voltage of 5V. It has a max attenuation frequency of 900MHz and can operate at temperatures ranging from -40 to 85°C. This surface mount device is commonly used for filtering data lines in various electronic applications.
NUF4220MNT1G
DATA LINE FILTER; Maximum DC Resistance: 1.1 ohm; Package Material: PLASTIC; Terminal Finish: NICKEL GOLD PALLADIUM; No. of Functions: 4; No. of Terminals: 8;
NUF4403MNT1G
NUF4403MNT1G by Onsemi is a data line filter with 4 functions and a rated voltage of 5V. It has a max attenuation frequency of 800MHz and can operate at temperatures ranging from -40 to 85°C. This surface mount device is commonly used for noise filtering in electronic applications.
NUF4211MNT1G
NUF4211MNT1G by Onsemi is a 4-function data line filter with 20 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring surface mount filters with dimensions of L2.0XB2.0XH1.0 mm, such as data transmission systems.
NUF4000MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Attenuation At Maximum Frequency: 30 dB; JESD-609 Code: e3; Rated Voltage: 5 V; Minimum Operating Temperature: -40 Cel;
NUF4010MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Terminal Finish: Tin (Sn); Mounting Type: SURFACE MOUNT; Approvals (V): IEC; Dimensions: L1.8XB1.2XH0.55 (mm)/L0.071XB0.047XH0.022 (inch);
NUF4105FCT1
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Minimum Operating Temperature: -40 Cel; Length: 2.96 mm; Dimensions: L2.96XB1.33XH0.7 (mm)/L0.117XB0.052XH0.028 (inch); Width (mm): 1.33;
NUF4107FC
DATA LINE FILTER;
NUF4107FCT1
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Packing Method: TAPE AND REEL; Capacitance: 60 uF; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
NUF4107FCT1G
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Height: .74 mm; Maximum Operating Temperature: 85 Cel; Dimensions: L2.96XB1.33XH0.74 (mm); Minimum Operating Temperature: -40 Cel;
NUF4115FCT1
DATA LINE FILTER; Package Material: PLASTIC; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
NUF4210MNT1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Additional Features: CUT-OFF FREQUENCY 250 MHZ; Width (mm): 1.6; Mounting Type: SURFACE MOUNT; Height: 1 mm;
NUF4310MNTAG
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Rated Voltage: 5 V; Capacitance: 18 uF; Width (mm): 1.0; Minimum Operating Temperature: -40 Cel;
NUF4402MNT1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Packing Method: TAPE AND REEL; Dimensions: L1.6XB1.6XH1.0 (mm)/L0.063XB0.063XH0.039 (inch); JESD-609 Code: e3; No. of Functions: 4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved