Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NUF4211MNT1G by Onsemi is a 4-function data line filter with 20 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring surface mount filters with dimensions of L2.0XB2.0XH1.0 mm, such as data transmission systems.
Median Price
$0.340
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Newark
1+ parts
$0.618
100+ parts
$0.393
1k+ parts
$0.353
10k+ parts
-
Mouser Electronics
$0.670
$0.413
$0.374
Arrow
$0.265
Verical
DigiKey
$0.297
Farnell
$0.323
$0.299
Chip1Stop
$0.356
$0.252
$0.223
Element14
$0.382
$0.330
$0.292
Flip Electronics (Authorized)
Nova Conductors
$0.352
Digiode
$0.505
Chip Stock
NAC Semi
$0.385
IBS Electronics
$0.319
Vyrian
Flip Electronics
Ampacity Inc.
$0.224
Semicontronic
$0.218
$0.217
Corohmni
Argo Parts USA
$0.341
Netroflash
Modulus Dynamics
Continental Prestige Electronics
$0.463
$0.284
$0.239
$0.205
Corphita
$0.479
RC Electronics
$0.390
$0.350
Perfect Parts
Lixinc
Kulean Microsystems
TANS Electronics
Problanco Electronics
Kepictronics
Authorized Procurement Solutions
UHIMA Technologies
SupplyDigital Components
This product has received IEC approval, indicating it meets international standards for safety and performance.
With 4 functions, this data line filter is versatile and can cater to multiple filtering requirements.
Rated for 5 volts, this filter is suitable for a wide range of electronic devices and applications.
Having 8 terminals allows for greater connectivity options and ensures a secure connection.
As a data line filter, this product is specifically designed to effectively filter out unwanted noise and interference from data signals.
With 20 dB attenuation at the maximum frequency, this filter provides strong noise suppression for clean data transmission.
Capable of operating at temperatures up to 85°C, this filter is suitable for a variety of environments.
With a minimum operating temperature of -40°C, this filter can withstand cold conditions without performance degradation.
The terminal finish of nickel, gold, and palladium ensures reliable connections and long-term performance.
With a maximum attenuation frequency of 800 MHz, this filter can effectively filter out high-frequency noise signals.
With a width of 2.0 mm, this filter is compact and can be easily integrated into various electronic devices.
The maximum DC resistance of 115 ohms ensures efficient power transfer and minimal signal loss.
At a length of 2 mm, this filter is space-saving and can be accommodated in tight spaces.
With an output impedance of 50 ohms, this filter is compatible with standard impedance requirements for data transmission.
The tape and reel packing method ensures easy handling and storage of multiple filters for production purposes.
With a surface mount design, this filter can be easily mounted on PCBs for streamlined production processes.
The compact dimensions of 2.0x2.0x1.0 mm make this filter suitable for small electronic devices and applications.
Constructed with durable plastic packaging, this filter provides protection against environmental factors and mechanical stress.
With a height of 1 mm, this filter has a low profile design that can be easily integrated into electronic assemblies.
The capacitance of 17 uF enables this filter to effectively filter out noise and interference in data signals, ensuring signal integrity.
Data Line Filters NUF4211MNT1G attributes and parameters. Explore more Data Line Filters devices from Onsemi
Additional Features:
Approvals (V):
Maximum Attenuation Frequency:
Attenuation At Maximum Frequency:
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Dimensions:
Rated Voltage:
Sub-Category:
Terminal Finish:
Width (mm):
NUF4211MNT1G Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Design/Specification - Lead Finish/BOM Update 10/Jul/2015
PCN Assembly/Origin - DFN Pkg Filters 18/Jun/2013
PCN Packaging - Covering Tape/Material Chg 20/May/2016
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Rugao Dachang Electronic
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Surge Components
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Sensitron Semiconductor
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
ACF451832-333-TD01
ACF451832-333-TD01 by TDK is a data line filter with 1 function and a rated voltage of 50V. It has a min insulation resistance of 1000 Mohm and can be used for applications requiring attenuation at max frequency of 25 dB, such as in electronic devices or communication systems.
MMZ1005S601CT000
The TDK MMZ1005S601CT000 is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1x0.5x0.5mm and a max operating temperature of 125°C, it offers low DC resistance of 0.6 ohm and output impedance of 600 ohm. This ferrite chip filter is suitable for use in electronic devices requiring noise suppression on data lines.
BLM15AG100SN1D
Murata Manufacturing
Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.
D-08C2A
KEMET Corporation
The KEMET Corporation D-08C2A is a data line filter with 4 functions, rated at 50V and 0.5A. It offers a min insulation resistance of 10 Mohm and operates b/w -25 to 65°C. With dimensions of L21.0xB16.0xH14.0 mm, it is ideal for applications requiring noise filtering in electronic circuits.
EMIF06-USD14F3
EMIF06-USD14F3 by STMicroelectronics is a data line filter with 6 functions and 15 terminals. It operates b/w -30°C to 85°C, with a capacitance of 12uF. This surface mount filter is ideal for applications requiring IEC and UL approvals.
7427927310
Wuerth Elektronik & Kg
7427927310 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, has a max DC resistance of 0.03 ohm, and an output impedance of 10 ohm. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
DLW5BTN102SQ2L
Murata's DLW5BTN102SQ2L is a Data Line Filter with 10 Mohm Insulation Resistance, 50V Rated Voltage, and 2A Rated Current. It has 4 terminals, operates b/w -40 to 85 °C, and offers an output impedance of 1000 ohm. Ideal for applications requiring noise suppression in data lines.
742792656
Wuerth Elektronik & Kg 742792656 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and an output impedance of 750 OHM. Ideal for surface mount applications in electronics requiring filtering at frequencies ranging from 100 MHz to 150 MHz.
74279215
Wurth Elektronik 74279215 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max operating temperature of 125°C and min frequency of 100 MHz, suitable for data line filtering applications due to its 80 OHM output impedance and surface mounting type.
EMIF02-USB03F2
EMIF02-USB03F2 by STMicroelectronics is a DATA LINE FILTER with 2 functions and 11 terminals. It has a capacitance of 20uF, operates b/w -40 to 85°C, and uses matte tin finish. Ideal for applications requiring IEC approvals in surface mount configurations.
BLM18EG221SN1B
Murata Manufacturing's BLM18EG221SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.05 ohm and output impedance of 260 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 2A and is commonly used in electronic devices requiring noise suppression on data lines.
MPZ1608B471AT
The TDK MPZ1608B471AT is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, has a DC resistance of 0.15 ohm, and an output impedance of 470 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100 MHz.
ACM2012H-900-2P-T03
TDK's ACM2012H-900-2P-T03 is a data line filter with 10 Mohm min insulation resistance, 50V rated voltage, and 105°C max operating temp. Ideal for automotive applications due to AEC-Q200 screening level and compact dimensions of L2.0xB1.2xH1.2 mm.
EMI103T-RC
Bourns
Bourns EMI103T-RC is a 3-terminal data line filter with 10,000 Mohm insulation resistance and 50V rated voltage. It offers 25dB attenuation at max frequency of 15MHz, making it ideal for noise suppression in electronic circuits. With dimensions of L9.0xB3.2xH8.0 mm, this through-hole mount filter has a rated current of 5A and capacitance of 10,000uF.
BLM18KG471SN1D
Murata Manufacturing's BLM18KG471SN1D is a chip bead data line filter with 470 OHM output impedance, suitable for surface mount applications. With dimensions of 1.6x0.8x0.8 mm and rated current of 1.5 A, it operates b/w -55 to 125 °C, making it ideal for noise suppression in electronic circuits up to 100 MHz frequency range.
MPZ2012S102AT000
The TDK MPZ2012S102AT000 is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. It has a DC resistance of 0.15 ohm, output impedance of 1000 ohm, and rated current of 1.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
HI3312X101R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .004 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 10 A;
BLM21BD222TN1D
Murata's BLM21BD222TN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125°C. With a DC resistance of 0.6 ohm and output impedance of 2200 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
MI0805K400R-10
Laird Technologies
MI0805K400R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 40 OHM. Ideal for surface mount applications in various electronic devices requiring noise suppression and signal filtering capabilities.
BLM21PG221SN1
Murata Manufacturing's BLM21PG221SN1 is a FERRITE CHIP filter with 2 terminals, rated for 2A current. With dimensions of L2.0XB1.25XH0.85 (mm), it offers an output impedance of 220 ohm and max DC resistance of 0.05 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C in surface mount configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NUF4001MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Maximum Attenuation Frequency: 800 MHz; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT; Additional Features: CUT-OFF FREQUENCY AT 150 MHZ; PI-TYPE CIRCUIT;
NUF4401MNT1G
NUF4401MNT1G by Onsemi is a data line filter with 4 functions and a rated voltage of 5V. It has a max attenuation frequency of 900MHz and can operate at temperatures ranging from -40 to 85°C. This surface mount device is commonly used for filtering data lines in various electronic applications.
NUF4220MNT1G
DATA LINE FILTER; Maximum DC Resistance: 1.1 ohm; Package Material: PLASTIC; Terminal Finish: NICKEL GOLD PALLADIUM; No. of Functions: 4; No. of Terminals: 8;
NUF4403MNT1G
NUF4403MNT1G by Onsemi is a data line filter with 4 functions and a rated voltage of 5V. It has a max attenuation frequency of 800MHz and can operate at temperatures ranging from -40 to 85°C. This surface mount device is commonly used for noise filtering in electronic applications.
NUF4000MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Attenuation At Maximum Frequency: 30 dB; JESD-609 Code: e3; Rated Voltage: 5 V; Minimum Operating Temperature: -40 Cel;
NUF4010MUT2G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Terminal Finish: Tin (Sn); Mounting Type: SURFACE MOUNT; Approvals (V): IEC; Dimensions: L1.8XB1.2XH0.55 (mm)/L0.071XB0.047XH0.022 (inch);
NUF4105FC
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 120 OHM; Height: .7 mm; No. of Functions: 1; Mounting Type: SURFACE MOUNT;
NUF4105FCT1
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Minimum Operating Temperature: -40 Cel; Length: 2.96 mm; Dimensions: L2.96XB1.33XH0.7 (mm)/L0.117XB0.052XH0.028 (inch); Width (mm): 1.33;
NUF4107FC
DATA LINE FILTER;
NUF4107FCT1
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Packing Method: TAPE AND REEL; Capacitance: 60 uF; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
NUF4107FCT1G
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Height: .74 mm; Maximum Operating Temperature: 85 Cel; Dimensions: L2.96XB1.33XH0.74 (mm); Minimum Operating Temperature: -40 Cel;
NUF4115FCT1
DATA LINE FILTER; Package Material: PLASTIC; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
NUF4210MNT1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Additional Features: CUT-OFF FREQUENCY 250 MHZ; Width (mm): 1.6; Mounting Type: SURFACE MOUNT; Height: 1 mm;
NUF4310MNTAG
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Rated Voltage: 5 V; Capacitance: 18 uF; Width (mm): 1.0; Minimum Operating Temperature: -40 Cel;
NUF4402MNT1G
DATA LINE FILTER; Maximum DC Resistance: 115 ohm; Packing Method: TAPE AND REEL; Dimensions: L1.6XB1.6XH1.0 (mm)/L0.063XB0.063XH0.039 (inch); JESD-609 Code: e3; No. of Functions: 4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved