Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NSI45030T1G by Onsemi is a small outline, low profile LED display driver with matte tin finish. It has 2 terminals in a rectangular package shape made of plastic/epoxy material. Ideal for graphics display applications due to its compact size and surface mount capability.
Median Price
$0.250
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.131
1k+ parts
$0.109
10k+ parts
$0.102
DigiKey
$0.098
Arrow
$0.476
$0.247
$0.165
$0.144
Newark
$0.518
$0.254
$0.166
-
Verical
$0.146
$0.129
Master Electronics
$0.198
$0.162
Chip1Stop
$0.149
Nova Conductors
$0.196
Digiode
$0.452
Maritex
$0.454
$0.242
$0.235
Chip Stock
Vyrian
ComSIT USA
ComSIT Distribution GmbH
IBS Electronics
$0.140
$0.125
Sensible Micro Corp
Ampacity Inc.
$0.122
Corohmni
Argo Parts USA
$0.190
Netroflash
$0.192
Semicontronic
$0.266
$0.259
$0.258
Continental Prestige Electronics
$0.372
$0.167
$0.118
$0.110
Corphita
$0.428
Vigor
$0.470
Microchip USA
$1.071
Advanced Electronics
$8.267
$7.523
$6.779
Aztec Data Supply Inc.
$11.980
ChipstoGo Electronic ltd
Lixinc
Kulean Microsystems
SupplyDigital Components
A-Z Elektronik GmbH
TANS Electronics
Authorized Procurement Solutions
Problanco Electronics
UHIMA Technologies
The use of plastic/epoxy material ensures that the product is lightweight and durable, making it a good choice for applications where weight and durability are important factors.
Being surface mountable makes the product easy to install and provides a more compact design, which is advantageous for space-constrained applications.
The rectangular shape of the package allows for efficient use of space and easy integration into various electronic devices.
Having a minimal number of terminals simplifies the installation process and reduces the chances of errors in connection, making it user-friendly.
The matte tin finish provides good solderability and corrosion resistance, ensuring a reliable electrical connection and long-term performance.
The dual terminal position offers flexibility in circuit design and ease of connection, allowing for greater customization and versatility in applications.
The low profile of the product is advantageous for applications where space is limited, enabling a more compact and sleek design.
The narrow width of the product enables better integration into small electronic devices and allows for more space-efficient placement on printed circuit boards.
The short time required at peak reflow temperature facilitates faster manufacturing processes and reduces the risk of heat-related damage to the product.
The high peak reflow temperature tolerance ensures that the product can withstand the typical soldering process without undergoing any performance degradation.
The compact length of the product allows for efficient use of space on a PCB and supports a sleek and streamlined design.
The gull wing terminal form provides mechanical stability during installation and ensures a strong connection, improving the product's overall reliability.
Being specifically designed as a LED display driver indicates that the product is optimized for driving LED displays, offering high performance and efficiency in such applications.
Graphics Display Drivers NSI45030T1G attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NSI45030T1G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Dev 09/Nov/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Diodes Incorporated
ROHM
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
MAX16834AUP/V+T
Analog Devices
MAX16834AUP/V+T by Analog Devices is a BICMOS LED display driver with 12V power supply, AEC-Q100 screening level, and operating temperature range of -40 to 125°C. Its small outline package with 20 terminals and gull wing terminal form make it ideal for automotive applications requiring high reliability in harsh environments.
TPS92630QPWPRQ1
TPS92630QPWPRQ1 by Texas Instruments is a 16-terminal LED display driver with 3 channels, suitable for automotive applications. It operates b/w -40 to 125 °C and supports a supply voltage range of 5-40 V. The package style is small outline with gull wing terminals, making it ideal for graphics display drivers in automotive environments.
TLC5941PWPR
TLC5941PWPR by Texas Instruments is a graphics display driver with 16 segments, operating at 3-5.5V. It features constant-current output, serial data input mode, and a small outline package style. Ideal for LED displays in industrial applications due to its wide temperature range (-40 to 85°C) and low supply current (60mA).
MAX7221CWG+
MAX7221CWG+ by Analog Devices is a graphics display driver with 8-digit, 7-segment display capability. It operates on a supply voltage range of 4V to 5.5V and has a max operating temperature of 70°C. This IC is commonly used in LED display applications requiring serial data input mode and small outline package style.
CAP1188-1-CP-TR
Standard Microsystems
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
PCF8562TT/2,118
NXP Semiconductors
PCF8562TT/2,118 by NXP Semiconductors is a DOT MATRIX display driver with SERIAL data input mode. It operates at 1.8-5.5 V and has 16-DIGIT display capability. Ideal for industrial applications requiring multiplexed displays in a compact form factor.
MP24833-AGN-Z
Monolithic Power Systems
Monolithic Power Systems' MP24833-AGN-Z is an LED display driver with a supply voltage range of 4.5V to 55V, suitable for automotive applications. This small outline package has 8 terminals and operates in temperatures from -40°C to 125°C. Ideal for graphics displays, it features a gull wing terminal form and dual terminal position.
MIC2299-15YML-TR
Micrel
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVQCCN; Package Shape: SQUARE;
TPS61165TDBVRQ1
TPS61165TDBVRQ1 by Texas Instruments is a graphics display driver with 3.6V power supply, 18V max voltage, and -40 to 105°C operating temp. Ideal for LED displays, it features a small outline package with 6 terminals and AEC-Q100 screening for industrial applications.
IS31FL3731-QFLS2-TR
Integrated Silicon Solution
IS31FL3731-QFLS2-TR by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with SERIAL data input mode. Operating voltage range from 2.7V to 5.5V, suitable for INDUSTRIAL applications. Features 144 segments in a SQUARE package style, making it ideal for graphics display drivers in compact designs.
MLX81115KLW-AAD-100-RE
Melexis N V
MLX81115KLW-AAD-100-RE by Melexis N V is a LED display driver with 12 terminals, operating temperature range of -40 to 125°C, and input characteristics are standard. It has a max supply voltage of 18V and min of 5.5V. This square-shaped IC is ideal for graphics display applications.
LM3414SDX/NOPB
National Semiconductor
Display Drivers; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: SON; Package Shape: RECTANGULAR; Package Equivalence Code: SOLCC8,.12,20;
LT3756EUD#PBF
LT3756EUD#PBF by Analog Devices is a Graphics Display Driver with a max supply voltage of 100V and min operating temperature of -40°C. It features 18 segments, operates at a min fmax of 1.05MHz, and is ideal for LED display driver applications in automotive environments.
BCR420UE6433HTMA1
LED DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 1;
AP3036BKTR-G1
AP3036BKTR-G1 by Diodes Inc. is a LED display driver with 6 segments, operating voltage range of 2.5V to 16V, and industrial temperature grade of -40°C to 85°C. It comes in a small outline package with dual terminals for surface mount applications in graphics displays.
LM3914V/NOPB
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 20; Package Code: QCCJ; Package Shape: SQUARE;
LM3404MRX/NOPB
Display Drivers; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 3;
TLC5928PWPRG4
TLC5928PWPRG4 by Texas Instruments is a graphics display driver with 16 segments, operating at 35 MHz. It features a serial data input mode, terminal pitch of 0.65 mm, and supports supply voltages of 3.3/5 V. Ideal for LED displays in industrial applications due to its compact size and high temperature tolerance up to 85°C.
CAT4139TD-GT3
Catalyst Semiconductor
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
TLC5927IPWPR
TLC5927IPWPR by Texas Instruments is a graphics display driver with 24 terminals, operating voltage of 3-5.5V, and constant-current output for LED displays. It features a serial data input mode, small outline package style, and dual terminal position. Ideal for automotive applications due to its wide temperature range (-40 to 125°C) and moisture sensitivity level of 2.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NSI45015WT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: LSOP; Package Shape: RECTANGULAR; Multiplexed Display Capability: NO;
NSI45020AT1G
NSI45020AT1G by Onsemi is a small outline, low profile LED display driver with matte tin finish. It has 2 terminals, measures 1.6mm in width and 2.69mm in length, suitable for graphics display applications. With peak reflow temperature of 260°C and dual terminal position, it offers efficient performance in compact designs.
NSI45030AT1G
NSI45030AT1G by Onsemi is a small outline, low profile LED display driver with matte tin finish. It has 2 terminals and measures 1.6mm in width, making it suitable for compact graphic display applications requiring precise control and efficient performance.
NSI45025AT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: LSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.35 mm;
NSI45060JDT4G
NSI45060JDT4G by Onsemi is a small outline LED display driver with 3 terminals, matte tin finish, and gull wing terminal form. It has a peak reflow temperature of 260°C and is suitable for graphics display applications due to its compact size and surface mount capability.
NSI45025T1G
NSI45025T1G by Onsemi is a small outline, low profile LED display driver with dual terminals. It has a peak reflow temperature of 260°C and matte tin terminal finish. Ideal for graphics display applications due to its compact size and surface mount capability.
NSI45025ZT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: SOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
NSI45020T1G
NSI45020T1G by Onsemi is a graphics display driver with a small outline, low profile package style. It has 2 terminals and a max seated height of 1.35 mm. This LED display driver is suitable for various applications requiring compact and efficient graphics display control.
NSI45030AZT1G
NSI45030AZT1G by Onsemi is a graphics display driver with a rectangular package shape and small outline style. It has 5 terminals with gull wing terminal form and matte tin terminal finish. This LED display driver is suitable for applications requiring a max seated height of 1.75 mm and peak reflow temperature of 260°C.
NSI45090JDT4G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Shape: RECTANGULAR; Qualification: Not Qualified; Length: 6.54 mm;
NSI45020JZT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Length: 6.5 mm;
NSI45025AZT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
NSI45030ZT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN;
NSI45035JZT1G
NSI45060DDT4G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Code: HSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 2.38 mm;
NSI45090DDT4G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Code: HSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-XSSO-G3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved