Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NSI45020JZT1G by Onsemi is a small outline LED display driver with 4 terminals, matte tin finish, and gull wing terminal form. It has a rectangular shape, measures 6.5mm in length, and is suitable for graphics display applications requiring surface mount technology. The package material is plastic/epoxy with a max seated height of 1.75mm, making it ideal for compact designs needing high-temperature reflow capabilities up to 260°C.
Median Price
$0.567
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Newark
1+ parts
100+ parts
$0.311
1k+ parts
$0.276
10k+ parts
-
Farnell
$0.581
$0.294
$0.227
Element14
$0.953
$0.481
$0.372
$0.295
Chip1Stop
$0.302
$0.241
$0.225
Verical
$0.298
$0.240
Digiode
$0.150
Vyrian
$0.158
Chip Stock
Nova Conductors
Inventory MP
Bristol Electronics
Prism Electronics
Corphita
$0.142
Corohmni
Ampacity Inc.
$0.203
Continental Prestige Electronics
$0.603
$0.280
$0.183
$0.180
Vigor
$0.660
ChipstoGo Electronic ltd
Authorized Procurement Solutions
SupplyDigital Components
TANS Electronics
A-Z Elektronik GmbH
Kulean Microsystems
Problanco Electronics
Kepictronics
Lixinc
Netroflash
UHIMA Technologies
The use of plastic/epoxy material makes the product lightweight and durable.
Being surface mountable, this product is easy to install and saves space on the circuit board.
The rectangular package shape allows for efficient use of space and easy integration into various electronic systems.
Having 4 terminals simplifies the connection process and ensures easy installation.
The small outline package style saves space on the circuit board and allows for a compact design.
The matte tin terminal finish provides good solderability and corrosion resistance.
Having dual terminal positions provides flexibility in mounting options and simplifies the assembly process.
The low maximum seated height allows for a slim and sleek design, ideal for space-constrained applications.
The 3.5mm width offers a compact form factor, suitable for small devices where space is limited.
The short time at peak reflow temperature ensures quick and efficient assembly of the product.
The peak reflow temperature of 260°C ensures proper soldering and reliable connections.
The 6.5mm length provides a balanced form factor, making it suitable for various electronic applications.
The gull wing terminal form offers mechanical stability and ease of soldering during installation.
With 6 segments, this product can drive multiple display units efficiently.
The 2.3mm terminal pitch allows for easy connections and aligning with other components on the circuit board.
This product is specifically designed to drive LED displays, ensuring optimal performance and compatibility.
Graphics Display Drivers NSI45020JZT1G attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NSI45020JZT1G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
MBR0520LT1
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
1N4148WS
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
PCA9635PW/S911,118
NXP Semiconductors
NXP Semiconductors' PCA9635PW/S911,118 is a serial LED display driver with 16 segments. It operates b/w -40 to 85 °C and supports a supply voltage range of 2.3-5.5 V. Ideal for industrial applications requiring precise graphics display control in compact spaces.
TPS92641PWP/NOPB
TPS92641PWP/NOPB by Texas Instruments is a graphics display driver with 16 terminals, operating voltage range of 7-24 V, and max supply voltage of 85 V. It is designed for automotive applications requiring constant-current output for LED displays.
LT3474EFE-1#PBF
Analog Devices
LT3474EFE-1#PBF by Analog Devices is a graphics display driver with a supply voltage range of 4V to 36V. It features a small outline package style with 16 terminals and operates in industrial temperature grades from -40°C to 85°C. Ideal for LED displays, this IC has a peak reflow temperature of 260°C and matte tin terminal finish.
TPS61160ADRVT
TPS61160ADRVT by Texas Instruments is a graphics display driver with 6 terminals, operating voltage range of 2.7V to 18V, and industrial temperature grade up to 85°C. It is designed for LED display driver applications requiring a small outline package with very thin profile and dual terminal position.
AY0438/P
Microchip Technology
Microchip Technology's AY0438/P is a 40-terminal graphics display driver with serial data input mode. Operating at 3-8.5V, it supports 32 segments and has a max supply current of 0.06mA. Ideal for commercial temperature grade applications requiring true output polarity in liquid crystal displays.
CAT32TDI-GT3
Catalyst Semiconductor
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
LT3763IFE#PBF
LT3763IFE#PBF by Analog Devices is a Graphics Display Driver with a max supply voltage of 60V, suitable for automotive applications. It operates b/w -40 to 125 °C and has a terminal pitch of 0.65mm. This LED display driver comes in a small outline package with 28 terminals and matte tin finish.
MAX6954AAX
Maxim Integrated
MAX6954AAX by Maxim Integrated is a 16-digit LED display driver with serial data input mode. It operates at supply voltages of 2.7V to 5.5V, suitable for automotive applications due to its temperature grade and CMOS technology. The small outline package with shrink pitch and gull wing terminal form makes it ideal for surface mount designs in various electronic devices.
FAN5702UC08X
FAN5702UC08X by Onsemi is a graphics display driver with 16 terminals, operating voltage range of 2.7V to 5.5V, and peak reflow temperature of 260°C. It features a serial data input mode and is designed for LED display driver applications in industrial settings. The package style is grid array with very thin profile and fine pitch, making it suitable for compact designs requiring precise control over multiple segments.
TLC59116IRHBR
TLC59116IRHBR by Texas Instruments is a graphics display driver with 16 channels, constant-current output, and serial data input mode. It operates b/w -40 to 85 °C and has a max supply voltage of 5.5 V. Ideal for LED display applications due to its compact chip carrier package style and industrial temperature grade suitability.
PLP5009RUKR
PLP5009RUKR by Texas Instruments is a graphics display driver with 20 terminals, operating voltage range of 2.7V to 5.5V, and serial data input mode. Ideal for LED displays, it has a compact square package shape, industrial temperature grade, and quad terminal position for various applications.
ICM7218AIPI
ICM7218AIPI by Maxim Integrated is a LED display driver with 8-digit segments and parallel data input mode. It operates at 5V, has a temperature range of -20 to 85°C, and features true output polarity. Ideal for graphics displays in various applications requiring multiplexed display capability.
PCF85176H/1,518
PCF85176H/1,518 by NXP Semiconductors is a graphics display driver with dot matrix display mode and serial data input. It operates at 1.8-5.5V, suitable for industrial applications. With 64 terminals and small outline package style, it offers multiplexed display capability for liquid crystal displays.
LM3410XSD/NOPB
LM3410XSD/NOPB by Texas Instruments is a LED display driver with 6 terminals, operating voltage range of 2.7V to 5.5V, and temperature grade suitable for automotive applications. Its small outline package style and dual terminal position make it ideal for graphics display drivers in compact electronic devices. With a peak reflow temperature of 260°C, this driver offers reliable performance in harsh environments.
MC14489BPE
Freescale Semiconductor
LED DISPLAY DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Package Style (Meter): IN-LINE;
PCA9634D,118
PCA9634D,118 by NXP Semiconductors is a Graphics Display Driver with 8 segments. It operates at 1 MHz max frequency and supports LED displays. This IC has a serial data input mode and can handle supply voltages from 2.3V to 5.5V, making it ideal for industrial temperature applications.
LM3409HVMYX
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE;
PCA9624PW,112
PCA9624PW,112 by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 24 terminals. It operates b/w -40 to 85 °C and supports a max supply voltage of 5.5 V. Ideal for industrial applications requiring high-quality graphics display drivers in compact form factors.
LT3518IUF#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
MIC3289-24YD6-TR
Micrel
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NSI45015WT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: LSOP; Package Shape: RECTANGULAR; Multiplexed Display Capability: NO;
NSI45020AT1G
NSI45020AT1G by Onsemi is a small outline, low profile LED display driver with matte tin finish. It has 2 terminals, measures 1.6mm in width and 2.69mm in length, suitable for graphics display applications. With peak reflow temperature of 260°C and dual terminal position, it offers efficient performance in compact designs.
NSI45030AT1G
NSI45030AT1G by Onsemi is a small outline, low profile LED display driver with matte tin finish. It has 2 terminals and measures 1.6mm in width, making it suitable for compact graphic display applications requiring precise control and efficient performance.
NSI45025AT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: LSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.35 mm;
NSI45060JDT4G
NSI45060JDT4G by Onsemi is a small outline LED display driver with 3 terminals, matte tin finish, and gull wing terminal form. It has a peak reflow temperature of 260°C and is suitable for graphics display applications due to its compact size and surface mount capability.
NSI45025T1G
NSI45025T1G by Onsemi is a small outline, low profile LED display driver with dual terminals. It has a peak reflow temperature of 260°C and matte tin terminal finish. Ideal for graphics display applications due to its compact size and surface mount capability.
NSI45025ZT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: SOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
NSI45020T1G
NSI45020T1G by Onsemi is a graphics display driver with a small outline, low profile package style. It has 2 terminals and a max seated height of 1.35 mm. This LED display driver is suitable for various applications requiring compact and efficient graphics display control.
NSI45030T1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: LSOP; Package Shape: RECTANGULAR; Maximum Time At Peak Reflow Temperature (s): 30;
NSI45030AZT1G
NSI45030AZT1G by Onsemi is a graphics display driver with a rectangular package shape and small outline style. It has 5 terminals with gull wing terminal form and matte tin terminal finish. This LED display driver is suitable for applications requiring a max seated height of 1.75 mm and peak reflow temperature of 260°C.
NSI45090JDT4G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Shape: RECTANGULAR; Qualification: Not Qualified; Length: 6.54 mm;
NSI45025AZT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
NSI45030ZT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN;
NSI45035JZT1G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Length: 6.5 mm;
NSI45060DDT4G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Code: HSOP; Package Shape: RECTANGULAR; Maximum Seated Height: 2.38 mm;
NSI45090DDT4G
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Code: HSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-XSSO-G3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved