Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NP3500SCMCT3G by Onsemi is a single silicon surge protector with a max DC off-state voltage of 320V and trigger device type as thyristor. It has a max operating temperature of 150 °C and is ideal for applications requiring protection against voltage surges in electronic circuits.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
AZTECH Wire
$12.590
Problanco Electronics
TANS Electronics
Kulean Microsystems
Corphita
UHIMA Technologies
Corohmni
SupplyDigital Components
PLASTIC/EPOXY material makes the surge protector lightweight and durable for long-lasting performance.
Single configuration makes it simple and easy to install, reducing complexity during setup.
Surface mount capability allows for easy and convenient mounting in various applications.
Rectangular shape makes it easy to integrate into different electronic devices and circuit designs.
C BEND terminal form ensures secure connection and stability within the circuit.
Having 2 terminals simplifies the connection process and compatibility with different systems.
Small outline package style saves space and facilitates compact designs for electronic equipment.
High maximum DC off-state voltage provides superior protection against voltage spikes and surges.
High maximum operating temperature ensures reliability and performance even in demanding environments.
Thyristor surge protector technology offers quick response times and effective surge protection.
Low minimum operating temperature allows for usage in a wide range of temperature conditions.
TIN terminal finish provides good conductivity and corrosion resistance for long-term reliability.
Dual terminal position offers flexibility in installation and compatibility with different circuit layouts.
High maximum breakdown voltage ensures effective protection against voltage fluctuations and overloads.
Short time at peak reflow temperature minimizes stress on components and ensures reliable soldering.
High peak reflow temperature capability ensures proper soldering and thermal performance during assembly.
UL recognized reference standard ensures compliance with safety and performance standards for added reliability.
Silicon Surge Protectors NP3500SCMCT3G attributes and parameters. Explore more Silicon Surge Protectors devices from Onsemi
Maximum Breakdown Voltage:
Configuration:
Maximum DC Off-state Voltage:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
NP3500SCMCT3G Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
PCN Obsolescence/ EOL - Multiple Devices 19/Jul/2012
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
TPA100B-12
STMicroelectronics TPA100B-12 is a single silicon surge protector with 30A non-repetitive peak on-state current. It features a plastic/epoxy package, matte tin terminals, and 121V max breakdown voltage. Ideal for surge protection applications in various electronic devices.
TISP7240F3P
TISP7240F3P by Texas Instruments is a silicon surge protector with 5.7A peak current, 180V DC voltage, and 240V breakdown voltage. It is configured with 3 delta-connected elements for surge protection in various applications like power supplies and telecommunications systems.
TPA110A-12-RL
STMicroelectronics TPA110A-12-RL is a single silicon surge protector with 30A non-repetitive peak on-state current. Its package is made of plastic/epoxy, featuring an axial terminal position. Ideal for applications requiring isolated case connection and max breakdown voltage of 147V.
NP1500SBT3G
Onsemi
NP1500SBT3G by Onsemi is a silicon surge protector with a max breakdown voltage of 180V and max operating temperature of 150 °C. It features a thyristor surge protector configuration in a small outline package, suitable for applications requiring protection against voltage surges in electronic circuits.
TISP4150F3SL
TISP4150F3SL by Texas Instruments is a single silicon surge protector with 6A peak current, 120V off-state voltage, and 150°C max operating temp. Ideal for protecting electronic circuits from voltage spikes in various applications.
TISP4070H3BJ
TISP4070H3BJ by Texas Instruments is a single silicon surge protector with 60A peak current, 58V off-state voltage, and 70V breakdown voltage. It is a thyristor surge protector used in applications requiring protection against electrical surges.
TISP4150F3D
TISP4150F3D by Texas Instruments is a single silicon surge protector with 4A peak current, 120V max voltage, and 150°C operating temp. Ideal for protecting circuits in electronics from voltage spikes. Surface mountable with UL recognition, it has dual terminals and Gull Wing form factor.
TISP3240F3P
TISP3240F3P by Texas Instruments is a Silicon Surge Protector with 6A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 2 elements. Ideal for protecting against surges in electronic circuits with a Max Breakdown Voltage of 240V.
MMT08B260T3
The Onsemi MMT08B260T3 is a silicon surge protector with a max breakdown voltage of 320V and non-repetitive peak on-state current of 32A. It is a single configuration device suitable for surface mount applications, featuring a trigger device type of thyristor surge protector. Ideal for protecting electronic circuits from voltage spikes in various industrial and consumer electronics applications.
TISP4115H3LM
TISP4115H3LM by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 60A. It operates b/w -40°C to 150°C, offering protection against surges up to 115V. Ideal for applications requiring reliable overvoltage protection in electronic circuits.
TISP4125M3BJ
TISP4125M3BJ by Texas Instruments is a single silicon surge protector with 32A peak current, 100V DC voltage, and 150°C max temp. Ideal for protecting circuits from surges in various applications due to its thyristor surge protection design and UL recognition.
TISP3145H3SL
TISP3145H3SL by Texas Instruments is a Silicon Surge Protector with 60A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 2 elements. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4165H3LPR
TISP4165H3LPR by Texas Instruments is a single thyristor surge protector with 60A non-repetitive peak on-state current and 165V max breakdown voltage. It features a plastic/epoxy package body, wire terminal form, and cylindrical package style. Ideal for protecting electronic devices from power surges in various applications.
TISP4180M3LP
TISP4180M3LP by Texas Instruments is a single silicon surge protector with 30A non-repetitive peak on-state current and 180V max breakdown voltage. It features a cylindrical package shape, wire terminal form, and bottom terminal position. Ideal for protecting electronic devices from power surges in various applications.
NP1300GBRLG
NP1300GBRLG by Onsemi is a single silicon surge protector with 120V DC off-state voltage and 160V breakdown voltage. It features a thyristor surge protector configuration, suitable for applications requiring isolated case connection and UL recognized standards compliance.
MMT10V400
The Onsemi MMT10V400 is a Silicon Surge Protector with 200V Repetitive Peak Reverse Voltage and 400V Max Breakdown Voltage. It operates b/w -40 °C to 125°C, suitable for surge protection applications in various electronic devices. This surface-mount device is ideal for safeguarding sensitive components from voltage spikes.
TISP4220M3BJR
TISP4220M3BJR by Texas Instruments is a single silicon surge protector with 32A non-repetitive peak current. It operates b/w -40°C to 150°C, has a max breakdown voltage of 220V, and is UL recognized. Ideal for protecting electronic devices from voltage surges in various applications.
TISP7380F3D
TISP7380F3D by Texas Instruments is a silicon surge protector with 4.3A peak current, 270V DC voltage, and 380V breakdown voltage. It is a thyristor surge protector in a small outline package suitable for surface mount applications. The device has 3 elements in delta configuration with gull wing terminals.
TISP4180H3LP
TISP4180H3LP by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current and 180V max breakdown voltage. It features a cylindrical package style, wire terminals, and thyristor surge protection. Ideal for safeguarding electronic devices from voltage spikes in various applications.
NP2300SBMCT3G
NP2300SBMCT3G by Onsemi is a single silicon surge protector with a non-repetitive peak on-state current of 30A. It features a max DC off-state voltage of 190V and operates b/w -55 °C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NP3500GARLG
THYRISTOR SURGE PROTECTOR; Package Style (Meter): LONG FORM; Surface Mount: NO; Terminal Position: AXIAL; Configuration: SINGLE; Case Connection: ISOLATED;
NP3500GBRLG
NP3500SAMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Qualification: Not Qualified;
NP3500SAT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Peak Reflow Temperature (C): 260;
NP3500SBMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JEDEC-95 Code: DO-214AA;
NP3500SBT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Finish: TIN;
NP3500SCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum DC Off-state Voltage: 320 V;
NP3500SET3G
THYRISTOR SURGE PROTECTOR; Surface Mount: YES; Maximum Breakdown Voltage: 400 V; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 150 Cel; Maximum Holding Current: 150 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved