Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NE592D8R2 by Onsemi is a video amplifier IC with +-6V power supplies, 40 kHz bandwidth, and 27mA max supply current. It is used in audio/video applications due to its small outline package and commercial temperature grade suitability.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
AZTECH Wire
$19.040
Problanco Electronics
TANS Electronics
SupplyDigital Components
Corphita
Kulean Microsystems
Microchip USA
Corohmni
Vigor
Perfect Parts
UHIMA Technologies
PLASTIC/EPOXY material provides durability and protection for the amplifier, ensuring a longer lifespan.
Surface mount capability allows for easy installation and integration into various electronic devices.
Operates on +-6V power supplies, making it suitable for a wide range of applications.
With a maximum operating temperature of 70 °C, this amplifier can function reliably even in warmer environments.
Can operate in temperatures as low as 0 °C, making it versatile for use in different climates.
Utilizes BIPOLAR technology, ensuring high performance and efficiency in audio and video amplification.
With a nominal bandwidth of 40 kHz, this amplifier is capable of delivering high-quality audio and video signals.
Audio & Video Amplifiers NE592D8R2 attributes and parameters. Explore more Audio & Video Amplifiers devices from Onsemi
Nominal Bandwidth:
General IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NE592D8R2 General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Obsolescence/ EOL - Multiple Devices 11/Feb/2009
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Semtech Electronics
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Rfe International
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
Sangdest Microelectronics (Nanjing)
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
TDA7498ETR
STMicroelectronics
TDA7498ETR by STMicroelectronics is a Class D audio amplifier with 160W output power, 10% harmonic distortion, and 35.8dB gain. It is ideal for audio and video applications requiring high-quality amplification in a small outline package with surface mount capabilities.
LM4861MX
LM4861MX by Texas Instruments is an audio amplifier with 1.6W output power and 26dB gain. It operates b/w -40 to 85°C, ideal for industrial applications. With a small outline package style and surface mount capability, it offers low harmonic distortion at 1%.
LM6172IM
VIDEO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MAX98307ETE+
Analog Devices
Analog Devices' MAX98307ETE+ is a Class DG audio amplifier with 3.3W output power, ideal for industrial applications. Operating b/w -40 to 85°C, it requires 2.6-5.25V supply voltage and draws a max of 2.7mA current in a compact square package style with surface mount capability.
THAT1512S08-U
That
THAT1512S08-U by That is an audio preamplifier with +-5V power supplies, 8mA max supply current, and industrial temperature grade. It features a small outline package shape suitable for surface mount applications in audio and video amplifiers.
MAX5486EUG+
Analog Devices' MAX5486EUG+ is a BICMOS audio amplifier IC with 2 channels, operating at -40 to 85°C. It has a power supply range of 2.7-5.5V and consumes max 1.4mA current. Ideal for audio applications requiring small outline, thin profile packages in industrial settings.
SSM2167-1RMZ-REEL
Analog Devices' SSM2167-1RMZ-REEL is an audio preamplifier with 18dB gain, operating voltage range of 2.5V to 5.5V, and bandwidth of 0.02 kHz. It comes in a small outline package suitable for industrial applications requiring precise audio amplification in compact spaces. The device features dual terminals, matte tin finish, and peak reflow temperature of 260°C.
TPA6211A1TDGNRQ1
TPA6211A1TDGNRQ1 by Texas Instruments is a Class D audio amplifier with 3.1W output power, 10% harmonic distortion, and 105dB noise figure. Ideal for automotive applications due to AEC-Q100 screening level, operating temperature range of -40 to 105°C, and compact square package design.
EL2470CS-T7
Rochester Electronics
VIDEO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Shape: RECTANGULAR; Qualification: Not Qualified;
TDA1521Q
NXP Semiconductors
NXP Semiconductors' TDA1521Q is a 2-channel audio amplifier with 12W output power and 30dB gain. It operates b/w -25 to 100°C, with 0.5% harmonic distortion. Ideal for audio applications requiring high-quality amplification in a compact rectangular package.
IRS2092STRPBF
Infineon Technologies
Infineon's IRS2092STRPBF is a Class D audio amplifier with 2 channels, operating at 10-18V. With a small outline package and gull wing terminals, it's ideal for automotive applications. This IC has a nominal bandwidth of 0.02 kHz and low power consumption of 11mA, making it suitable for compact audio systems.
TDA7266S
TDA7266S by STMicroelectronics is a 2-channel audio amplifier with 5W output power and 26dB gain. It operates b/w 3-18V, has a bandwidth of 0.02 kHz, and low harmonic distortion at 10%. Ideal for audio applications requiring high-quality sound amplification in commercial temperature environments.
TAS5766MDCAR
TAS5766MDCAR by Texas Instruments is a 48-terminal audio amplifier with 50W output power, 20dB gain, and 106dB noise figure. Ideal for applications requiring high-quality audio amplification in compact spaces. Operates b/w -25 to 85°C temperature range with a supply voltage of 4.5V to 26.4V.
TPA6205A1DRBRG4
TPA6205A1DRBRG4 by Texas Instruments is an audio amplifier IC with 1.25W output power, 1% harmonic distortion, and 3/5V power supplies. It is ideal for industrial applications due to its small outline package style and wide operating temperature range from -40 to 85°C.
FDA801-VYY
STMicroelectronics' FDA801-VYY is a Class D audio amplifier with 4 channels and BCDMOS technology. It features a low profile flatpack package with gull wing terminals, suitable for surface mount applications. With a min supply voltage of 6V, it is ideal for compact audio and video amplification systems.
TDA8541T/N1/02,118
TDA8541T/N1/02,118 by NXP Semiconductors is an audio amplifier IC with 8 terminals and 1.2W output power. It operates b/w -40 to 85°C, has a gain of 20dB, and low harmonic distortion at 10%. This small outline package is ideal for industrial applications requiring high-quality audio amplification in a compact form factor.
NCS2561SQT1G
NCS2561SQT1G by Onsemi is a video amplifier IC with 6 terminals, operating voltage range of 2.7V to 3.3V, and max supply current of 9mA. It has a small outline package suitable for automotive applications due to its wide temperature range (-40°C to 125°C) and thin profile design. The IC is surface mountable and ideal for audio & video amplification in compact electronic devices.
TPA3110D2PWPR
TPA3110D2PWPR by Texas Instruments is a 10W audio amplifier IC with 2 channels. It operates at temperatures from -40 to 85°C and supports power supplies of 12/24V. This CMOS technology-based device is ideal for industrial applications requiring high-quality audio amplification in a compact package.
TPA3112D1PWPR
TPA3112D1PWPR by Texas Instruments is an audio amplifier IC with 25W output power, suitable for industrial applications. It operates at temperatures b/w -40 to 85°C and supports supply voltages from 8-26V. This CMOS technology-based amplifier has a noise figure of 102dB and a bandwidth of 0.022 kHz.
TL592BPSRG4
TL592BPSRG4 by Texas Instruments is a video amplifier IC with a bandwidth of 50 kHz, suitable for audio and video applications. It operates on +-6V power supplies, has 8 terminals in a small outline package, and can handle temperatures from 0 to 70°C. Ideal for commercial use due to its bipolar technology and Gull Wing terminal form.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NE592D8R2G
NE592D8R2G by Onsemi is a video amplifier IC with 8 terminals, operating at +-6V. It has a bandwidth of 40 kHz and consumes 27mA max supply current. Ideal for audio/video applications due to its small outline package and commercial temperature grade suitability.
NE592D8G
NE592D8G by Onsemi is a video amplifier IC with +-6V power supplies, 40 kHz bandwidth, and 27mA max supply current. It is used in audio/video amplification applications due to its small outline package and commercial temperature grade suitability.
NE592D14R2G
VIDEO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
NE592N14G
VIDEO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
NE592D14G
NE592N8G
VIDEO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NE592AN3
NE592JP4
NE592ANP3
NE592DR
NE592N
NE592J4
NE592AJ4
NE592AJ
NE592AD
NE592ADR
NE592AJP4
NE592N3
NE592J
NE592D
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved