Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$0.465
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$0.168
100+ parts
$0.160
1k+ parts
$0.154
10k+ parts
-
Texas Instruments
$0.521
$0.401
$0.211
Mouser Electronics
$0.830
$0.468
$0.387
$0.386
Adafruit Industries
$1.597
$1.453
$1.310
Rochester
$0.448
$0.372
$0.332
Verical
$0.415
DigiKey
$0.409
Chip1Stop
Digiode
$0.278
Nova Conductors
$0.412
Vyrian
Anansix
Chip Stock
Ampacity Inc.
$0.249
Corphita
$0.264
Argo Parts USA
$0.399
Continental Prestige Electronics
$0.403
Bastille Electronics
$0.391
$0.367
Advanced Electronics
Parana Technologies
$2.391
$2.890
ChromeModa Solutions
$2.687
$2.203
IDEA Electronic Components Group
$2.418
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Kepictronics
Lixinc
Perfect Parts
Alle Elektronik GmbH
iodParts Technologies Inc.
$0.388
DigiPath Technology Company
$2.423
Futuretech Components
Audio & Video Amplifiers LM4818MX/NOPB attributes and parameters. Explore more Audio & Video Amplifiers devices from National Semiconductor
Nominal Bandwidth:
General IC Type:
Harmonic Distortion:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Power:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LM4818MX/NOPB General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - SOIC Pkg Wire Bonding Update 24/Jul/2013 SOIC Pkg Wire Bonding 20/Mar/2013
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148WT
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Silicon Standard
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
STM32H750VBT6
STMicroelectronics
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Electronic Transistors
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
MAX9788ETI+
Analog Devices
Analog Devices' MAX9788ETI+ is a Class G audio amplifier with 2.4W output power, suitable for industrial applications. It operates b/w -40 to 85°C, with supply voltage range of 2.7-5.5V and low current draw of 12mA, making it ideal for compact audio systems in tight spaces.
TPA3120D2PWP
TPA3120D2PWP by Texas Instruments is a 24-terminal audio amplifier with a power supply of 24V, offering 20W nominal output power and a gain of 36dB. This CMOS technology device operates in industrial temperature range (-40 to 85°C) and is suitable for audio applications requiring high-quality amplification in compact spaces.
MAX98365CEWC+
Maxim Integrated
CLASS D AUDIO AMPLIFIER; Terminal Form: BALL; No. of Terminals: 12; Package Code: BGA; Package Shape: RECTANGULAR; Terminal Pitch: .4 mm;
LM4871MMX/NOPB
National Semiconductor
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
LM4871MM
LM4889MM/NOPB
AN7062N
AN7062N by Panasonic is an audio amplifier IC with 60W output power and 0.01% harmonic distortion. It operates at temperatures from -25 to 75°C, with a supply voltage of +-70V. Ideal for audio amplification in commercial applications due to its compact rectangular package design and low distortion levels.
TPA6120A2DWP
TPA6120A2DWP by Texas Instruments is a dual-channel audio amplifier with a nominal output power of 1.5W and a nominal bandwidth of 0.022 kHz. It operates on +-5/+-15V power supplies, has 20 terminals in a small outline package style, and is suitable for industrial temperature grade applications.
KA2206B
Samsung's KA2206B is a 2-channel audio amplifier with a nominal output power of 2.3W. It operates at supply voltages ranging from 4.5V to 11V, making it suitable for various audio and video amplification applications. The package style is in-line with a rectangular shape and plastic/epoxy material, featuring 12 terminals in dual position through-hole form.
TPA0211DGNR
TPA0211DGNR by Texas Instruments is a small outline audio amplifier with 2W output power, 1% harmonic distortion, and 93dB noise figure. Ideal for industrial applications, it operates b/w -40 to 85°C with a supply voltage range of 2.5-5.5V.
LM1875TLB03
LM1875TLB03 by National Semiconductor is an audio amplifier IC with 25W output power and 1% harmonic distortion. Operating at +-25V supplies, it has a gain of 26dB and nominal bandwidth of 0.02kHz. Ideal for audio applications requiring high-quality amplification in a compact FLANGE MOUNT package style.
MAX9736AETJ+T
Analog Devices' MAX9736AETJ+T is a Class D audio amplifier with 30W output power. Operating temperature range from -40 to 85°C, suitable for industrial applications. Surface mount package style, square shape, and quad terminal position make it ideal for compact audio and video systems.
LM380N
LM380N by Texas Instruments is an audio amplifier IC with 2.5W output power and 34dB gain. It operates b/w 0-70°C, ideal for commercial applications requiring a compact rectangular package with through-hole terminals. With low harmonic distortion of 3%, it suits audio and video amplification needs in various electronic devices.
TDA1521AU
Philips Semiconductors
AUDIO AMPLIFIER; Temperature Grade: OTHER; No. of Terminals: 9; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 25 Cel; Technology: BIPOLAR;
SSM2518CPZ-R7
SSM2518CPZ-R7 by Analog Devices is a surface mount Class D audio amplifier with 2.5W nominal output power. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3.6V. This amplifier is commonly used in audio and video applications requiring high-quality sound amplification.
LM4871MMX/NOPB by Texas Instruments is a small outline, thin profile audio amplifier with a power supply of 5V. It has a nominal output power of 3W and operates in an industrial temperature range (-40 to 85°C). This amplifier is suitable for applications requiring high-quality audio amplification in compact devices.
TDA8932BTW/N2
NXP Semiconductors
NXP Semiconductors' TDA8932BTW/N2 is a 55W audio amplifier IC with 2 channels, ideal for industrial applications. It operates b/w -40 to 85°C, with a gain of 36dB and nominal bandwidth of 0.02kHz. The package style is small outline, heat sink/slug, thin profile, shrink pitch.
MAX98357AGTE/V+
Analog Devices' MAX98357AGTE/V+ is a Class D audio amplifier with 5V power supply, 16 terminals, and 3mA max supply current. It operates b/w -40 to 85°C, suitable for industrial applications. The chip carrier package is surface mountable and AEC-Q100 screened for automotive use.
TPA751DGNR
TPA751DGNR by Texas Instruments is a small outline audio amplifier with 8 terminals, operating b/w -40 to 85°C. It offers 0.7W nominal output power, 0.5% harmonic distortion, and a bandwidth of 0.02 kHz. Ideal for industrial applications requiring compact size and low power consumption.
MAX9814ETD+T
Analog Devices' MAX9814ETD+T is a 14-terminal audio amplifier IC with a gain of 40 dB. Operating b/w -40 to 85°C, it has a supply voltage range of 2.7-5.5 V and bandwidth of 0.022 kHz. Ideal for applications requiring small outline, heat sink profile amplification in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM4861MX/NOPB
LM4871MX/NOPB
LM4871MX/NOPB by Texas Instruments is an audio amplifier IC with 3W output power, 10% harmonic distortion, and 5V supply voltage. It is used in industrial applications requiring small outline package style for audio amplification.
LM4861MX
LM4871MM/NOPB
LM4880M
LM4861M/NOPB
LM4861M/NOPB by Texas Instruments is an audio amplifier IC with 1.6W output power and 26dB gain. It operates b/w -40 to 85°C, suitable for industrial applications. This CMOS technology device has a small outline package with surface mount capability, making it ideal for compact audio systems.
LM4871M/NOPB
LM4871MX
LM4861M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved