Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV551SN33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in automotive electronics and industrial control systems. With a compact package style and surface-mount capability, this CMOS technology-based regulator offers precise voltage control with low dropout and load regulation percentages.
Median Price
$0.600
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Farnell
1+ parts
$0.562
100+ parts
$0.312
1k+ parts
$0.260
10k+ parts
$0.254
Arrow
$0.639
$0.383
$0.320
$0.276
Newark
$0.715
$0.399
$0.342
$0.328
Mouser Electronics
$0.730
$0.408
$0.350
-
DigiKey
$0.407
$0.349
Element14
$1.060
$0.540
$0.506
$0.486
Flip Electronics (Authorized)
Verical
$0.400
$0.356
Rochester
$0.385
$0.285
Future Electronics
$0.275
Chip1Stop
$0.377
$0.317
Greenchips
$0.264
$0.252
$0.240
$0.216
Digiode
Nova Conductors
$0.395
Chip Stock
Flip Electronics
J2 Sourcing AB
ComSIT Distribution GmbH
SIE Connect GmbH - GreenChips
Bristol Electronics
Vyrian
Sensible Micro Corp
NAC Semi
$0.590
IBS Electronics
$0.504
$0.393
$0.378
NexGen Digital
Cyclops Electronics Ltd
Atlantic Semiconductor
ComSIT USA
Ampacity Inc.
$0.200
Semicontronic
$0.195
$0.194
Corohmni
$0.234
Corphita
$0.261
Argo Parts USA
$0.367
Netroflash
$0.387
Modulus Dynamics
$0.402
$0.390
Vigor
Component Stockers USA
$0.310
$0.360
Continental Prestige Electronics
$0.854
$0.468
$0.319
$0.253
Advanced Electronics
$5.720
$5.434
Aztec Data Supply Inc.
$7.150
Perfect Parts
RC Electronics
Infinite Electronics LLP (Excess)
GreenTree Electronics
Kepictronics
Lixinc
TANS Electronics
Kulean Microsystems
Problanco Electronics
Eastek
$0.560
SupplyDigital Components
Futuretech Components
Glotronic Ltd.
Formix International (Excess)
Robosynatics
Lucentia Tech
$363.605
UHIMA Technologies
The use of plastic/epoxy material makes the product durable and resistant to environmental factors.
Low dropout voltage ensures efficient power conversion and minimal power loss.
Wide operating temperature range allows the product to function reliably in various environments.
CMOS technology offers low power consumption and high efficiency in voltage regulation.
Provides a stable and precise output voltage for connected devices.
Capable of supplying sufficient current for small electronic devices.
Fixed Regulators - Positive Single Output LDO NCV551SN33T1G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCV551SN33T1G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - NCP551,NCV551 Datasheet Update 28/May/2014
PCN Assembly/Origin - NCV8560SN250T1G
PCN Packaging - Covering Tape/Material Chg 20/May/2016
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
Rectron
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SPX3819M5-L-2-5/TR
Maxlinear
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 1 %; Operating Temperature (TJ-Min): -40 Cel;
LT3032EDE#TRPBF
Analog Devices
Analog Devices' LT3032EDE#TRPBF is a fixed positive single output LDO regulator with a max output current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in need of stable voltage regulation in compact spaces. The package style is small outline with very thin profile, ideal for surface mount designs requiring efficient heat dissipation.
BD750L5FP-CE2
ROHM
ROHM's BD750L5FP-CE2 is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.25A max output current. It features a small outline package, Gull Wing terminal form, and operates in temperatures ranging from -40 to 150°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LM2940CS-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 5 %;
TPS79333DBVRG4
Texas Instruments
TPS79333DBVRG4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.2A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, low profile, shrink pitch, ideal for surface mount designs.
LT1117CST-3.3#PBF
Analog Devices' LT1117CST-3.3#PBF is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 1.2V, suitable for applications requiring stable power supply in compact spaces. Operating temperature ranges from 0 to 125°C, making it ideal for various electronic devices needing efficient regulation with low dropout voltage. This surface-mount device features a small outline package style and matte tin terminal finish, ensuring reliable performance in limited space environments.
TPS70933DBVR
TPS70933DBVR by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 1.4V and an operating temperature range of -40°C to 125°C. It is commonly used in applications requiring a stable and regulated output voltage of 3.3V, such as power management systems in electronic devices.
MIC5209-3.3YS-TR
MIC5209-3.3YS-TR by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LM2936M-5.0
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LM1117IMP-3.3/NOPB
LM1117IMP-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and features low dropout voltage at 1.2V for efficient power management applications.
TLV74033PDBVR
TLV74033PDBVR by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5V max dropout voltage. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LP2954IT/NOPB
LP2954IT/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.25A max output current. It offers a dropout voltage of 0.8V, line regulation of 0.02%, and load regulation of 0.015%. Ideal for applications requiring stable voltage supply in temperature range from -40°C to 125°C.
MCP1700T-3302E/TT
MCP1700T-3302E/TT by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It operates in the temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
MIC5239-5.0YS-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Terminal Position: DUAL; Maximum Output Current-1: .5 A;
LP2985IM5-1.8/NOPB
LP2985IM5-1.8/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 1.8V nominal output voltage and 0.15A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
MC33269DTRK-3.3G
MC33269DTRK-3.3G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.8A max output current. It has a small outline package style, operates b/w -40 to 150 °C, and offers low dropout voltage of 1.1V for applications requiring stable voltage regulation in compact designs.
LT1963AEST-3.3#TRPBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
TLV1117-50IDCYR
TLV1117-50IDCYR by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.8A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LM3480IM3X-12/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LP2980IM5-2.5/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV5501DT33RKG
NCV5501DT33RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. With AEC-Q100 screening level and small outline package style, this bipolar technology regulator offers precise voltage control for automotive electronics.
NCV551SN50T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 3 %;
NCV5661DT33RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 1.5 %;
NCV5500DT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %;
NCV5501DT15G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %; Maximum Seated Height: 2.38 mm;
NCV5501DT50RKG
NCV5501DT50RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.5A and a dropout voltage of 0.7V. It is commonly used in applications requiring stable voltage regulation, such as automotive electronics and industrial control systems.
NCV553SQ50T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 2 %;
NCV551SN30T1G
NCV551SN31T1G
Onsemi's NCV551SN31T1G is a CMOS LDO regulator with 3.1V output voltage, 0.15A output current, and 3% voltage tolerance. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40°C to 150°C with a compact package size of 3mm x 1.5mm x 1.1mm.
NCV59745AMW180TAG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: HVQCCN; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 1 %;
NCV511SN25T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Terminal Pitch: .95 mm;
NCV5501DT50G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %;
NCV500SN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2.5 %;
NCV551SN14T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 4 %;
NCV5500DT15RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %; Minimum Input Voltage: 2.5 V;
NCV551SN15T1
NCV502SN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 2 %;
NCV5500DT33RKG
NCV551SN15T1G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved