Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV511SN25T1G by Onsemi is a CMOS technology-based LDO regulator with a fixed output voltage of 2.5V and max output current of 0.15A. It operates at an extended temperature range up to 150 °C, making it suitable for automotive applications requiring stable power supply in compact spaces. The device features a small outline package with gull wing terminals, ideal for surface mount assembly in space-constrained designs.
Median Price
$0.429
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.840
100+ parts
$0.523
1k+ parts
$0.423
10k+ parts
-
Rochester
$0.374
$0.310
$0.277
DigiKey
$0.470
Verical
$0.388
$0.346
Digiode
$0.305
Vyrian
$0.321
Bristol Electronics
$1.081
$0.400
$0.281
Chip Stock
Dan-Mar Components
Vigor
$0.270
Corphita
$0.289
Corohmni
TANS Electronics
Problanco Electronics
Kulean Microsystems
Kepictronics
Microchip USA
SupplyDigital Components
UHIMA Technologies
The plastic/epoxy material used for the package body makes the product lightweight and durable.
The low maximum dropout voltage ensures efficient power conversion and minimal energy loss.
Being surface mountable makes the product easy to integrate into electronic circuits.
The high operating temperature range allows the regulator to function reliably in various environments.
AEC-Q100 screening ensures the product meets automotive-grade quality and reliability standards.
The CMOS technology used in the regulator offers low power consumption and high reliability.
The rectangular package shape allows for efficient placement on PCBs.
The gull-wing terminal form makes soldering the regulator onto a PCB easier and more secure.
The low minimum output voltage makes the regulator suitable for a wide range of applications.
The tight voltage tolerance ensures a stable and precise output voltage.
The nominal output voltage of 2.5 V is a common voltage requirement for many electronic devices.
Having 5 terminals provides flexibility for connecting the regulator in different circuit configurations.
The small outline, thin profile, and shrink pitch package style saves space on the PCB and allows for compact designs.
The small terminal pitch enables high-density mounting and efficient use of PCB space.
The fixed positive single output LDO regulator provides stable voltage regulation for sensitive electronic components.
The matte tin finish on the terminals provides good solderability and corrosion resistance.
The dual terminal position offers flexibility in PCB layout and component placement.
The maximum output voltage of 2.575 V allows for a slightly higher voltage output if needed.
The low seated height of 1.1 mm enables the regulator to fit in compact electronic devices.
The narrow width of 1.5 mm contributes to the compact size and space-saving design of the regulator.
The regulator can operate efficiently with a low minimum input voltage of 3.5 V.
With a maximum output current of 0.15 A, the regulator can power a variety of electronic components within its capacity.
The regulator can withstand peak reflow temperatures for up to 30 seconds during assembly processes.
The high peak reflow temperature of 260 °C ensures proper soldering and reliability during manufacturing.
The low nominal dropout voltage results in minimal voltage loss and efficient power conversion.
The compact length of 3 mm contributes to the overall small size and space-saving design of the regulator.
The regulator can safely handle a maximum input voltage of 6 V, making it suitable for a wide range of applications.
Fixed Regulators - Positive Single Output LDO NCV511SN25T1G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Regulator Type:
Screening Level:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCV511SN25T1G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Devices 05/Feb/2019
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taiwan Semiconductor
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM2936HVBMAX3.3
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
ADM7172ACPZ-1.3-R7
Analog Devices
ADM7172ACPZ-1.3-R7 by Analog Devices is a CMOS LDO regulator with 1.3V output voltage, 2A max output current, and 1% voltage tolerance. Ideal for applications requiring fixed positive single output regulators in compact spaces due to its small package size and low dropout voltage of 1V.
LT1129IST-5#PBF
Analog Devices' LT1129IST-5#PBF is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.7V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LP3981ILD-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3 %;
LM7805
First Components International
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %; Surface Mount: NO; Technology: BIPOLAR;
MIC5353-1.8YMT-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Peak Reflow Temperature (C): 260; Operating Temperature (TJ-Min): -40 Cel;
LM2931ADT-5.0RKG
LM2931ADT-5.0RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MIC5205-5.0YM5-TR
MIC5205-5.0YM5-TR by Microchip is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.15A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as portable electronics and IoT devices.
LM2940T-10.0/NOPB
LM2940T-10.0/NOPB by Texas Instruments is a 10V fixed positive single output LDO regulator with a max output current of 1A. It operates b/w -40 to 125°C, has a dropout voltage of 1V, and offers a max load regulation of 0.165%. Ideal for applications requiring stable voltage outputs in various electronic devices.
PTPS7A2401DBVR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR;
AP2210N-3.3TRG1
Diodes Incorporated
AP2210N-3.3TRG1 by Diodes Inc. is a fixed positive single output LDO regulator with a max dropout voltage of 0.5V and a max output current of 0.3A. It is commonly used in applications requiring stable voltage regulation, such as power supplies for electronic devices.
LP2950CDT-3.3/NOPB
LP2950CDT-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LT1121IST-5#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %;
LM2937ES-8.0/NOPB
LM2937ES-8.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 8V and max current of 0.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in a compact package. With a dropout voltage of only 1V, this device is ideal for designs where efficiency and space are critical factors.
LM2937ES-5.0/NOPB
LM2937ES-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. With a max output current of 0.5A and small outline package style, it is ideal for space-constrained designs where precise power management is crucial.
MCP1702T-5002E/MBVAO
MCP1702T-5002E/MBVAO by Microchip is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.25A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
LP2950ACDT-3.3RG
LP2950ACDT-3.3RG by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.1A and a dropout voltage of 0.45V. It is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
LF33ABDT-TR
STMicroelectronics
STMicroelectronics LF33ABDT-TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It has a small outline package style, operates at -40 to 125 °C, and is ideal for applications requiring low dropout voltage and precise voltage regulation.
LM1117DTX-1.8/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
LM1117IMP-5.0/NOPB
LM1117IMP-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.8A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers efficient performance with minimal dropout voltage of 1.2V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV551SN33T1G
NCV551SN33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in automotive electronics and industrial control systems. With a compact package style and surface-mount capability, this CMOS technology-based regulator offers precise voltage control with low dropout and load regulation percentages.
NCV5501DT33RKG
NCV5501DT33RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. With AEC-Q100 screening level and small outline package style, this bipolar technology regulator offers precise voltage control for automotive electronics.
NCV551SN50T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 3 %;
NCV5661DT33RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 1.5 %;
NCV5500DT50RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %;
NCV5501DT15G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %; Maximum Seated Height: 2.38 mm;
NCV5501DT50RKG
NCV5501DT50RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.5A and a dropout voltage of 0.7V. It is commonly used in applications requiring stable voltage regulation, such as automotive electronics and industrial control systems.
NCV553SQ50T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 2 %;
NCV551SN30T1G
NCV551SN31T1G
Onsemi's NCV551SN31T1G is a CMOS LDO regulator with 3.1V output voltage, 0.15A output current, and 3% voltage tolerance. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40°C to 150°C with a compact package size of 3mm x 1.5mm x 1.1mm.
NCV59745AMW180TAG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: HVQCCN; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 1 %;
NCV5501DT50G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %;
NCV500SN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2.5 %;
NCV551SN14T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 4 %;
NCV5500DT15RKG
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %; Minimum Input Voltage: 2.5 V;
NCV551SN15T1
NCV502SN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 12 V; Maximum Voltage Tolerance: 2 %;
NCV5500DT33RKG
NCV551SN15T1G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved