Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV51198PDR2G by Onsemi is a DDR termination regulator with 8 terminals in a small outline package. It features gull wing terminal form, AEC-Q100 screening level, and is surface mountable. Ideal for automotive applications requiring precise voltage regulation in compact spaces.
Median Price
$1.330
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$1.100
10k+ parts
$0.984
DigiKey
$1.130
Verical
$1.375
$1.230
Flip Electronics (Authorized)
Digiode
$1.036
Vyrian
$1.090
Flip Electronics
Corphita
$0.981
Vigor
$1.050
Corohmni
Continental Prestige Electronics
$0.980
Authorized Procurement Solutions
Perfect Parts
TANS Electronics
Kepictronics
SupplyDigital Components
Kulean Microsystems
Futuretech Components
UHIMA Technologies
Problanco Electronics
Microchip USA
Plastic material makes the package lightweight and durable, suitable for various applications.
Surface mount capability allows for easier and more efficient installation onto circuit boards.
AEC-Q100 screening ensures high-reliability performance in automotive applications.
Rectangular shape offers efficient use of space on circuit boards.
Gull wing terminals provide secure connections to the circuit board, enhancing reliability.
TR packing method ensures secure and organized packaging for transportation and storage.
8 terminals provide versatile connectivity options for various circuit configurations.
Small terminal pitch allows for compact and efficient circuit board design.
DDR termination regulator ensures stable and accurate voltage regulation for DDR memory modules.
Dual terminal position offers additional flexibility in circuit board layout and design.
Low maximum seated height enables the product to be used in space-constrained applications.
Compact width allows for easy integration into tight spaces on circuit boards.
Short length facilitates efficient placement of the product on circuit boards, minimizing space usage.
Other Function Regulators NCV51198PDR2G attributes and parameters. Explore more Other Function Regulators devices from Onsemi
JESD-30 Code:
Length:
No. of Functions:
No. of Outputs:
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Regulator Type:
Screening Level:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
NCV51198PDR2G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
Sensitron Semiconductor
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LM320-12KC
Texas Instruments
LM320-12KC by Texas Instruments is a bipolar fixed regulator with -12V output voltage, 1A max output current, and 32V max input voltage. It offers excellent line regulation of 0.02% and load regulation of 0.08%, making it ideal for applications requiring precise voltage control in temperature-sensitive environments up to 125°C. The package body material is plastic/epoxy with three terminals spaced at 2.54mm pitch.
TPS7133QPWP
TPS7133QPWP by Texas Instruments is a BICMOS technology regulator with 3.3V output voltage, 0.5A max current, and 2% voltage tolerance. It is ideal for applications requiring precise power management in a small outline package with gull wing terminals. Operating temperature range from -40 to 125°C makes it suitable for various environments.
UA78M08CKDP1
UA78M08CKDP1 by Texas Instruments is a fixed 8V bipolar regulator with 3 terminals and plastic/epoxy package. It operates b/w 0-125°C, offering a max voltage tolerance of 5%. With load regulation at 0.16%, it's ideal for applications requiring stable output voltage in various electronic devices.
UA79M08CKC1
UA79M08CKC1 by Texas Instruments is a fixed bipolar regulator with an output voltage of -8V and max current of 0.5A. It operates b/w 0-125°C, has a voltage tolerance of 5%, and is suitable for applications requiring stable power supply regulation in various electronic devices.
UA79M20MLA/883B
UA79M20MLA/883B by Texas Instruments is a BIPOLAR regulator with -20V output voltage, 0.5A output current, and 150°C max operating temperature. It is ideal for MIL-STD-883 Class B applications requiring precise voltage regulation in harsh environments.
LT1084MKA
LT1084MKA by Texas Instruments is a metal package bipolar regulator with an adjustable output voltage range from 1.2V to 29V and a max output current of 5A. It offers excellent load regulation at 0.4% and operates in temperatures ranging from -55°C to 150°C, making it ideal for various applications requiring precise voltage regulation.
TPS774333DGKR
TPS774333DGKR by Texas Instruments is a MOS regulator with 3.3V output, 0.25A current, and 2% voltage tolerance. It operates b/w -40 to 125°C, suitable for applications requiring precise voltage regulation in compact spaces like consumer electronics and IoT devices.
LM7812T
Bay Linear
Other Regulators;
UA78M06CKD3
UA78M06CKD3 by Texas Instruments is a fixed 6V voltage regulator with a max output current of 0.5A and operating temperature range from 0 to 125°C. This bipolar technology regulator has a plastic/epoxy package body material, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LT3007ETS8-1.8#TRMPBF
Analog Devices' LT3007ETS8-1.8#TRMPBF is a bipolar technology regulator with 1.8V output voltage, ideal for applications requiring precise voltage regulation. With a max load regulation of 0.015% and operating temperature range from -40 to 125°C, it offers stable performance in various environments. The small outline package with gull wing terminals makes it suitable for space-constrained designs that require efficient power management.
NX1117CE50Z,115
NXP Semiconductors
NXP Semiconductors' NX1117CE50Z,115 is a 5V fixed voltage regulator with a max output current of 0.8A and a dropout voltage of 1.07V. It features surface mount technology, plastic/epoxy package body material, and is ideal for applications requiring stable power supply in electronic devices.
LP4951CMX/NOPB
National Semiconductor
Other Regulators; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 4 %;
UA78L09ACLPP1
UA78L09ACLPP1 by Texas Instruments is a fixed 9V voltage regulator with a max output current of 0.1A and operating temperature range from 0 to 125°C. It features a bipolar technology, plastic/epoxy package body material, and offers excellent line and load regulation. Ideal for applications requiring stable power supply in various electronic devices.
LP2996LQ
LP2996LQ by Texas Instruments is a DDR termination regulator in a square chip carrier package with 16 terminals. It features a 0.5mm terminal pitch, 0.8mm max seated height, and measures 4x4mm. Ideal for applications requiring surface mount regulators with very thin profiles.
SN0309051DBVR
SN0309051DBVR by Texas Instruments is a BICMOS technology regulator with 1.8V output voltage, 0.2A output current, and 2% voltage tolerance. It operates in temperatures ranging from -40 to 125°C and is surface mountable, making it ideal for applications requiring precise voltage regulation in compact spaces.
SN72400N
SN72400N by Texas Instruments is a 14-terminal bipolar regulator with a rectangular package shape. It operates b/w 0°C to 70°C, making it suitable for various applications requiring precise voltage regulation. The through-hole terminals and plastic/epoxy body material enhance durability in different environments.
LM138K/883C
LM138K/883C by National Semiconductor is a metal-packaged bipolar regulator with an operating temperature range of -55°C to 150°C. It has an adjustable output voltage from 1.2V to 32V, making it suitable for various applications in military and industrial environments requiring MIL-STD-883 Class C screening.
UA78L15QDR
UA78L15QDR by Texas Instruments is a fixed voltage regulator with an output of 15V and max load regulation of 0.15%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring stable power supply. It comes in a small outline package with surface mount capability, ideal for compact designs.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
MC79L12CLPR
MC79L12CLPR by Texas Instruments is a fixed -12V regulator with 0-125°C operating temperature range. It offers 10% voltage tolerance, 0.1A output current, and 1.7V dropout voltage. Ideal for applications requiring stable negative voltage regulation in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV51190MNTAG
Onsemi
NCV51190MNTAG by Onsemi is a DDR termination regulator with 8 terminals in a small outline package. It features AEC-Q100 screening, surface mount capability, and a plastic/epoxy body material. Ideal for automotive applications requiring precise voltage regulation in compact spaces.
NCV51200MNTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Length: 3 mm; Surface Mount: YES;
NCV51199PDR2G
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HSOP; Terminal Form: GULL WING; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
NCV51200MLTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Operating Temperature: 125 Cel; Maximum Time At Peak Reflow Temperature (s): 30;
NCV51200MWTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Pitch: .5 mm; Maximum Time At Peak Reflow Temperature (s): 30;
NCV51400MNTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Operating Temperature: 125 Cel; Packing Method: TR;
NCV51400MWTXG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Length: 3 mm; Package Body Material: PLASTIC/EPOXY;
NCV51510MNTAG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Package Body Material: PLASTIC/EPOXY; Screening Level: AEC-Q100;
NCV51510MWTAG
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Load Regulation: .004 %; Maximum Seated Height: 1 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved