Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV317LBZRAG by Onsemi is an AEC-Q100 compliant adjustable positive single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -40 to 125 °C, making it suitable for automotive applications. It has a max output current of 0.1A and load regulation of 1.5%.
Median Price
$0.152
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.350
100+ parts
$0.178
1k+ parts
$0.147
10k+ parts
$0.128
DigiKey
-
$0.080
Flip Electronics (Authorized)
Rochester
$0.126
$0.112
Digiode
$0.118
Vyrian
$0.120
Chip Stock
Flip Electronics
Ashlea Components Ltd
Corphita
Corohmni
Vigor
$0.170
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
TANS Electronics
Microchip USA
UHIMA Technologies
Enhanced durability and resistance to environmental conditions
Suitable for a wide range of operating temperatures
Allow for a high voltage differential which is useful in various applications
Ensures high quality and reliability for automotive applications
Provides stable and accurate output voltage
Compact design for space-saving applications
Easy to install and suitable for through-hole PCB mounting
Can withstand low temperature environments
Ability to output low voltages for various electronic devices
Simple and straightforward to use with minimal connections required
Provides stable output voltage despite varying input voltage
Aesthetically pleasing design for visible installations
Customizable output voltage for different applications
Maintains output voltage stability under varying load conditions
Standardized pitch for compatibility with various PCB layouts
Allows for operation with lower voltage differentials
Specifically designed for precise output voltage regulation
Corrosion-resistant finish for long-term reliability
Simplifies PCB layout and connections
Can provide relatively high output voltages for various applications
Sufficient output current for low-power devices
Withstands high temperatures during soldering process
Low dropout voltage for efficient power conversion
Adjustable Regulators - Positive Single Output Standard NCV317LBZRAG attributes and parameters. Explore more Adjustable Regulators - Positive Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
NCV317LBZRAG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult IC Device DataSheet Update 13/Oct/2016
PCN Assembly/Origin - Assembly/Test Transfer 28/Sep/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Weitron Technology
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Vishay Intertechnology
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Multicomp Pro
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
LM117HRLQMLV
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Minimum Output Voltage-1: 1.2 V; Surface Mount: NO; Terminal Position: BOTTOM;
LM317EMP
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Package Style (Meter): SMALL OUTLINE;
LM317LD
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Minimum Input-Output Voltage Differential: 3 V; JESD-30 Code: R-PDSO-G8;
LM317MSTT3
Onsemi
LM317MSTT3 by Onsemi is a BIPOLAR adjustable positive single output standard regulator with a max output voltage of 37V and load regulation of 1.5%. It is ideal for applications requiring precise voltage regulation in compact spaces, thanks to its small outline package style and surface-mount capability. Operating temperature ranges from 0°C to 125°C, making it suitable for various environments.
JM38510/11704BYA
JM38510/11704BYA by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and current of 1.5A. Operating temperature ranges from -55°C to 125°C, making it suitable for various applications in harsh environments meeting MIL-M-38510 Class B standards. With load regulation at just 0.03%, this bipolar technology device offers precise voltage control for critical systems.
JL117SXA
The Texas Instruments JL117SXA is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 0.5A. Operating temperature ranges from -55°C to 150°C, making it suitable for various industrial applications requiring precise voltage regulation in harsh environments. Its cylindrical package body material and wire terminal form provide durability and ease of installation.
5962R0722962VZA
The Texas Instruments 5962R0722962VZA is an adjustable positive single output standard regulator with a max output current of 0.5 A and a total dose of 100k Rad(Si). It features a package body made of ceramic and metal-sealed cofired material, suitable for applications requiring precise voltage regulation in harsh environments such as aerospace or military systems.
LM217MDT
LM217MDT by STMicroelectronics is an adjustable positive single output standard regulator with a max output current of 0.5A and a max load regulation of 4.17%. It operates in temperatures ranging from -40 to 125 °C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
MPQ2019GN
Monolithic Power Systems
MPQ2019GN by Monolithic Power Systems is an adjustable positive single output standard regulator with a max output current of 0.3A and a max output voltage of 15V. It is commonly used in applications requiring precise voltage regulation, such as power supplies and battery chargers.
LT317AT
Analog Devices
LT317AT by Analog Devices is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a package style of flange mount and through-hole terminal form, it offers flexibility in design and assembly processes.
LM117HVH/883B
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Operating Temperature (TJ-Max): 150 Cel; Maximum Input-Output Voltage Differential: 60 V; Technology: BIPOLAR;
NCV317LBDG
NCV317LBDG by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and load regulation of 1.5%. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications meeting AEC-Q100 standards.
VB408FI
VB408FI by STMicroelectronics is an adjustable positive single output standard regulator with a max input-output voltage differential of 30V and operating temperature range from -25 to 125 °C. It has a max output current of 0.04A, making it suitable for applications requiring precise voltage regulation in various electronic devices.
LM305H
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Terminal Form: WIRE; Minimum Output Voltage-1: 4.5 V; Surface Mount: NO; Operating Temperature (TJ-Max): 85 Cel;
LM723L
LM723L by STMicroelectronics is an adjustable positive voltage regulator with a range of 2V to 37V and a max output current of 0.15A. It features a ceramic, metal-sealed package and through-hole terminals for easy integration. Ideal for power supply applications in various electronic circuits.
LT1120ACS8
LT1120ACS8 by Analog Devices is an adjustable positive single output standard regulator with a max output current of 0.125A and operating temperature up to 110 °C. This surface-mount device in a small outline package is ideal for applications requiring precise voltage regulation in compact spaces.
TL317CPWRG4
TL317CPWRG4 by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 32V and max output current of 0.1A. It operates in a temperature range from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. The package style is small outline, thin profile, shrink pitch, ideal for space-constrained designs that require efficient power management.
LM117H/883C
LM117H/883C by National Semiconductor is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -55 to 150°C, making it suitable for harsh environments. With a max output current of 0.5A, it is ideal for military and aerospace applications requiring precise voltage regulation.
LM317LITP
LM317LITP by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications. With a max output current of 0.1A and load regulation of 1.5%, it is ideal for precision voltage regulation in electronic circuits.
LT1020CSW#TR
LT1020CSW#TR by Analog Devices is an adjustable positive single output standard regulator with a max input-output voltage differential of 33.5V, making it suitable for various applications requiring precise voltage regulation. With a max load regulation of 0.4% and a max output current of 0.125A, this bipolar technology-based regulator offers reliable performance in compact electronic devices operating within a temperature range of 0 to 100 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV317BD2TG
NCV317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max input-output voltage differential of 40V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications in automotive electronics and industrial control systems.
NCV317BD2TR4G
NCV317BD2TR4G by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5 A and a max input-output voltage differential of 40 V. It is commonly used in applications requiring precise voltage regulation, such as power supplies and battery charging circuits.
NCV317MBSTT3G
NCV317MBSTT3G by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and a max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring precise voltage regulation.
NCV317MBDTRKG
NCV317MBDTRKG by Onsemi is an adjustable positive single output standard regulator with a max output current of 0.5A and a max input-output voltage differential of 40V. It is commonly used in applications requiring precise voltage regulation, such as power supplies and battery chargers.
NCV317MABDTRKG
NCV317MABDTRKG by Onsemi is an adjustable positive single output standard regulator with a max output current of 0.5A and a max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring precise voltage regulation.
NCV317BTG
NCV317BTG by Onsemi is an AEC-Q100 rated adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from -55 to 150°C, making it suitable for automotive applications requiring precise voltage regulation.
NCV317LBDR2G
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: DUAL;
NCV317MABSTT3G
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30;
NCV317BD2T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Surface Mount: YES; Screening Level: AEC-Q100;
NCV317BD2TR4
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Minimum Output Voltage-1: 1.2 V; Maximum Seated Height: 4.826 mm;
NCV317BT
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 150 Cel; JESD-609 Code: e0; Adjustability: ADJUSTABLE;
NCV317LBDR2
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Surface Mount: YES;
NCV317LBZG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Adjustability: ADJUSTABLE; Nominal Dropout Voltage-1: 3 V;
NCV317MBDTG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 30; Minimum Output Voltage-1: 1.2 V; Package Body Material: PLASTIC/EPOXY;
NCV317MBDTRK
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Minimum Input-Output Voltage Differential: 3 V; Package Body Material: PLASTIC/EPOXY; Maximum Seated Height: 2.38 mm;
NCV317MBTG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Nominal Dropout Voltage-1: 3 V; Terminal Position: SINGLE; Operating Temperature (TJ-Max): 125 Cel; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved