Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV317LBDR2G by Onsemi is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications. It features a small outline package style and offers adjustable output voltage down to 1.2V, with load regulation of 1.5%.
Median Price
$0.277
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.153
1k+ parts
$0.122
10k+ parts
$0.105
DigiKey
$0.310
$0.165
$0.138
-
Mouser Electronics
$0.137
EBV Elektronik
Avnet
Chip1Stop
$0.111
Verical
Mobius Materials
$0.100
$0.080
TME
$0.170
$0.103
$0.092
$0.084
Nova Conductors
$0.208
Digiode
$0.294
Bristol Electronics
$0.525
$0.263
Ozdisan Elektronik
$62.731
NAC Semi
$0.274
Chip Stock
Flip Electronics
Cyclops Electronics Ltd
Infinite Electronics LLP
IBS Electronics
Vyrian
ComSIT Distribution GmbH
Classic Components Corporation
Ack Elektronik San.Tic.Ltd.Sti
Microfarads
Ampacity Inc.
$0.086
Semicontronic
$0.083
Corohmni
Argo Parts USA
$0.201
Netroflash
$0.197
$0.193
Continental Prestige Electronics
$0.203
Corphita
$0.279
Component Stockers USA
$0.280
$0.180
$0.130
Vigor
$0.300
Microchip USA
$2.795
Aztec Data Supply Inc.
$8.240
Perfect Parts
GreenTree Electronics
Eastek
$0.160
Kepictronics
ChipstoGo Electronic ltd
Lixinc
TANS Electronics
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$8.902
$8.721
UHIMA Technologies
Formix International (Excess)
Durable material for long-lasting performance and protection.
Easy to mount on circuit boards for efficient assembly.
Can operate in high temperature environments without compromising performance.
Provides a wide allowable range for input-output voltage differential.
Designed to meet automotive industry quality standards for reliability.
Utilizes bipolar technology for stable and accurate voltage regulation.
Allows for fine-tuning of output voltage to meet specific requirements.
Maintains stable output voltage under varying load conditions.
Standard regulator type with positive single output for various applications.
Adjustable Regulators - Positive Single Output Standard NCV317LBDR2G attributes and parameters. Explore more Adjustable Regulators - Positive Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCV317LBDR2G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mold Compound Update 14/Jan/2015
PCN Assembly/Origin - NCV317 11/May/2021
PCN Packaging - MSL1 Pkg Chg 20/Dec/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NE555DR
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Uniohm
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
Goodwork Semiconductor
Comchip Technology
LM338KSTEEL/NOPB
LM338KSTEEL/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output current of 5A and a max input-output voltage differential of 35V. It operates b/w -40°C to +125°C, making it suitable for various applications requiring precise voltage regulation in harsh environments. The package style is flange mount with a terminal form of pin/peg, providing versatility in installation.
LM317LILPR
LM317LILPR by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 35V. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications. With a max output current of 0.1A and package style in cylindrical shape, it offers precise regulation in compact designs.
LM217LD-TR
STMicroelectronics
LM217LD-TR by STMicroelectronics is an adjustable positive single output standard regulator with a max output voltage of 37V and a max load regulation of 1%. It operates in temperatures ranging from -40 °C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM317MKTP
LM317MKTP by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 0.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM317MDTX/NOPB
LM317MDTX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. Its small outline package and surface mount capability enhance versatility in electronic designs.
NCV317MABSTT3G
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30;
LM117HVH/883
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Terminal Finish: Tin/Lead (Sn63Pb37); Package Equivalence Code: CAN3/4,.2; Operating Temperature (TJ-Max): 150 Cel;
LM317LBR2
LM317LBR2 by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125 °C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
LM317BD2TR4
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Width: 9.1945 mm; Maximum Output Current-1: 1.5 A;
LM723CN
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 14; Package Code: DIP; Terminal Form: THROUGH-HOLE; Maximum Seated Height: 5.1 mm; Width: 7.62 mm;
LM317MT
LM317MT by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation. The package style is flange mount with through-hole terminals, providing ease of use in electronic circuits.
KA317L
KA317L by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 0.1A. It comes in a cylindrical package made of plastic/epoxy, suitable for various applications requiring precise voltage regulation in through-hole mounting configurations.
LM217LD
LM217LD by STMicroelectronics is an adjustable positive single output standard regulator with a max output voltage of 37V and a max load regulation of 1%. It operates in temperatures ranging from -40 °C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
RHFL6000LAKP02V
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR;
LM317MABTG
LM317MABTG by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125 °C and has a min input-output voltage differential of 3V. Ideal for applications requiring precise voltage regulation in various electronic devices.
5962-0722901QXA
The Texas Instruments 5962-0722901QXA is an adjustable positive single output standard regulator with a max output current of 0.5 A and total dose of 100k Rad(Si). It operates in temperatures up to 150°C, making it suitable for military applications requiring high radiation tolerance. The package body material is metal, ensuring durability in harsh environments.
LM723J/883/NOPB
LM723J/883/NOPB by Texas Instruments is a MIL-STD-883 compliant adjustable positive single output standard regulator with max output voltage of 37V and max current of 0.15A. This bipolar technology device in ceramic package is ideal for applications requiring precise voltage regulation in harsh environments.
NCV317MABDTRKG
NCV317MABDTRKG by Onsemi is an adjustable positive single output standard regulator with a max output current of 0.5A and a max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring precise voltage regulation.
LR8K4-G
Supertex
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
LM317HVT
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 5.7 %; Maximum Line Regulation (%/V): .07; Operating Temperature (TJ-Max): 125 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV317BD2TG
NCV317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max input-output voltage differential of 40V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications in automotive electronics and industrial control systems.
NCV317BD2TR4G
NCV317BD2TR4G by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5 A and a max input-output voltage differential of 40 V. It is commonly used in applications requiring precise voltage regulation, such as power supplies and battery charging circuits.
NCV317MBSTT3G
NCV317MBSTT3G by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and a max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring precise voltage regulation.
NCV317MBDTRKG
NCV317MBDTRKG by Onsemi is an adjustable positive single output standard regulator with a max output current of 0.5A and a max input-output voltage differential of 40V. It is commonly used in applications requiring precise voltage regulation, such as power supplies and battery chargers.
NCV317BTG
NCV317BTG by Onsemi is an AEC-Q100 rated adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from -55 to 150°C, making it suitable for automotive applications requiring precise voltage regulation.
NCV317BD2T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Surface Mount: YES; Screening Level: AEC-Q100;
NCV317BD2TR4
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Minimum Output Voltage-1: 1.2 V; Maximum Seated Height: 4.826 mm;
NCV317BT
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 150 Cel; JESD-609 Code: e0; Adjustability: ADJUSTABLE;
NCV317LBDG
NCV317LBDG by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and load regulation of 1.5%. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications meeting AEC-Q100 standards.
NCV317LBDR2
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Surface Mount: YES;
NCV317LBZG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Adjustability: ADJUSTABLE; Nominal Dropout Voltage-1: 3 V;
NCV317LBZRAG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Line Regulation (%/V): .07; Minimum Input-Output Voltage Differential: 3 V;
NCV317MBDTG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 30; Minimum Output Voltage-1: 1.2 V; Package Body Material: PLASTIC/EPOXY;
NCV317MBDTRK
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Minimum Input-Output Voltage Differential: 3 V; Package Body Material: PLASTIC/EPOXY; Maximum Seated Height: 2.38 mm;
NCV317MBTG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Nominal Dropout Voltage-1: 3 V; Terminal Position: SINGLE; Operating Temperature (TJ-Max): 125 Cel; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved