Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV317MBDTG by Onsemi is an AEC-Q100 rated adjustable positive single output standard regulator with a max output voltage of 37V and a max load regulation of 1.5%. It operates in temperatures ranging from -40 °C to 125°C, making it suitable for automotive applications requiring precise voltage regulation.
Median Price
$0.306
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.254
10k+ parts
$0.226
DigiKey
$0.380
Verical
$0.283
Flip Electronics
$0.164
Digiode
$0.262
Chip Stock
Vyrian
Bristol Electronics
Corphita
$0.248
Corohmni
$0.276
Vigor
$0.720
AZTECH Wire
$15.560
Authorized Procurement Solutions
TANS Electronics
Kulean Microsystems
Problanco Electronics
Continental Prestige Electronics
$0.249
Perfect Parts
SupplyDigital Components
UHIMA Technologies
Microchip USA
GreenTree Electronics
The use of plastic/epoxy material ensures durability and reliability for the product.
Facilitates easy installation and saves space on the circuit board.
Provides a high maximum output voltage, suitable for a wide range of applications.
Capable of delivering a maximum output current of 0.5 A, making it suitable for powering various devices.
Can operate effectively in high-temperature environments, ensuring reliable performance.
The matte tin finish enhances the product's solderability and conductivity.
The adjustable feature allows for flexibility in voltage regulation, making it suitable for various applications.
Adjustable Regulators - Positive Single Output Standard NCV317MBDTG attributes and parameters. Explore more Adjustable Regulators - Positive Single Output Standard devices from Onsemi
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCV317MBDTG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rfe International
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
General Semiconductor
ABS06-32.768KHZ-T
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
American Power Devices
M3851011703SXX
Analog Devices
M3851011703SXX by Analog Devices is an adjustable positive single output standard regulator with a max output current of 1.5A and a max input-output voltage differential of 40V. It operates in temperatures ranging from -55 °C to 150°C, making it suitable for various applications requiring precise voltage regulation in harsh environments. The package body material is metal, and the technology used is bipolar, with a cylindrical package style and wire terminal form.
LM105H/883
Texas Instruments
LM105H/883 by Texas Instruments is a MIL-STD-883 compliant adjustable regulator with a max output voltage of 40V and current of 10A. It features a package body made of metal, suitable for applications requiring high reliability in harsh environments. With a wide operating temperature range from -55°C to 125°C, it is ideal for aerospace and defense systems.
LM317LZ/LFT7
LM317LZ/LFT7 by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation. With a max output current of 0.1A and compact cylindrical package style, it is ideal for space-constrained designs in electronics.
LT1120MJ8
LT1120MJ8 by Analog Devices is an adjustable positive single output standard regulator with a max output voltage of 30V and max current of 0.125A. It features through-hole terminals, ceramic package body material, and is commonly used in applications requiring precise voltage regulation in electronic circuits.
LM317MBDTRKG
LM317MBDTRKG by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and load regulation of 1.5%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
LM117HVHMW8
LM117HVHMW8 by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 57V. Operating temperature ranges from -55°C to 150°C, making it suitable for various applications. This surface-mount device utilizes bipolar technology and comes in an uncased chip package style.
LM317MKVURG3
LM317MKVURG3 by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation. With a max output current of 0.5A and compact dimensions (6.6mm x 6.095mm x 2.52mm), it is ideal for space-constrained electronic designs.
LT317AT
LT317AT by Analog Devices is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a package style of flange mount and through-hole terminal form, it offers flexibility in design and assembly processes.
JM38510/10201SIA
JM38510/10201SIA by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 38V. It has a package style of cylindrical and can operate in temperatures ranging from -55 to 125 °C. Ideal for applications requiring precise voltage regulation in compact spaces.
RHFL4913KPA2
RHFL4913KPA2 by STMicroelectronics is an adjustable positive single output regulator with a max output of 9V and current of 2A. It operates in extreme temps from -55 °C to 150 °C, making it ideal for harsh environments. Its ceramic, metal-sealed package ensures durability and reliability.
LT1020CN#PBF
LT1020CN#PBF by Analog Devices is an adjustable positive single output standard regulator with a max input-output voltage differential of 33.5V, making it suitable for various applications requiring precise voltage regulation. With a max load regulation of 0.4% and a max output current of 0.125A, this bipolar technology-based regulator offers reliable performance in a compact rectangular package ideal for through-hole mounting.
LM317LBR2
LM317LBR2 by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125 °C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
LM117KSTEEL
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: BFM; Terminal Form: PIN/PEG; Package Equivalence Code: TO-204/-3; Minimum Input-Output Voltage Differential: 3 V;
LT1120IS8#PBF
Analog Devices' LT1120IS8#PBF is a BIPOLAR technology adjustable positive single output standard regulator with 8 terminals. It offers an output voltage range of 2.46V to 2.54V and can handle a max current of 0.125A, making it ideal for applications requiring precise voltage regulation in compact electronic devices.
TL783CKTTR
TL783CKTTR by Texas Instruments is an adjustable positive single output standard regulator with a max output current of 0.7A and a max input-output voltage differential of 125V. With a package style of small outline, it is suitable for applications requiring precise voltage regulation in electronic circuits operating within the temperature range of 0 to 125°C.
LM117
LM117 by STMicroelectronics is an adjustable positive voltage regulator with a range of 1.2V to 37V. It operates b/w -55 °C and 150°C, featuring a metal body and flange mount design. Ideal for power supply applications in various electronic devices.
5962R9951703VXA
The Texas Instruments 5962R9951703VXA is an adjustable positive single output standard regulator with a max output current of 1.5A and total dose of 100k Rad(Si). It operates in temperatures up to 150°C, making it suitable for high-temperature applications in aerospace and defense industries. With a package body material of METAL, this regulator offers reliable performance in harsh environments.
LM317LIBPX/NOPB
LM317LIBPX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM350T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Surface Mount: NO; Operating Temperature (TJ-Max): 70 Cel;
MC1723CD
MC1723CD by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 0.15A. It operates in temperatures ranging from -65 to 175 °C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV317BD2TG
NCV317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max input-output voltage differential of 40V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications in automotive electronics and industrial control systems.
NCV317BD2TR4G
NCV317BD2TR4G by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5 A and a max input-output voltage differential of 40 V. It is commonly used in applications requiring precise voltage regulation, such as power supplies and battery charging circuits.
NCV317MBSTT3G
NCV317MBSTT3G by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and a max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring precise voltage regulation.
NCV317MBDTRKG
NCV317MBDTRKG by Onsemi is an adjustable positive single output standard regulator with a max output current of 0.5A and a max input-output voltage differential of 40V. It is commonly used in applications requiring precise voltage regulation, such as power supplies and battery chargers.
NCV317MABDTRKG
NCV317MABDTRKG by Onsemi is an adjustable positive single output standard regulator with a max output current of 0.5A and a max load regulation of 1.5%. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring precise voltage regulation.
NCV317BTG
NCV317BTG by Onsemi is an AEC-Q100 rated adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from -55 to 150°C, making it suitable for automotive applications requiring precise voltage regulation.
NCV317LBDR2G
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: DUAL;
NCV317MABSTT3G
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 30;
NCV317BD2T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Surface Mount: YES; Screening Level: AEC-Q100;
NCV317BD2TR4
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Minimum Output Voltage-1: 1.2 V; Maximum Seated Height: 4.826 mm;
NCV317BT
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Max): 150 Cel; JESD-609 Code: e0; Adjustability: ADJUSTABLE;
NCV317LBDG
NCV317LBDG by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and load regulation of 1.5%. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications meeting AEC-Q100 standards.
NCV317LBDR2
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Surface Mount: YES;
NCV317LBZG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Adjustability: ADJUSTABLE; Nominal Dropout Voltage-1: 3 V;
NCV317LBZRAG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Line Regulation (%/V): .07; Minimum Input-Output Voltage Differential: 3 V;
NCV317MBDTRK
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Minimum Input-Output Voltage Differential: 3 V; Package Body Material: PLASTIC/EPOXY; Maximum Seated Height: 2.38 mm;
NCV317MBTG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Nominal Dropout Voltage-1: 3 V; Terminal Position: SINGLE; Operating Temperature (TJ-Max): 125 Cel; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved