Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LT317AT by Analog Devices is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a package style of flange mount and through-hole terminal form, it offers flexibility in design and assembly processes.
Median Price
$3.850
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Component Electronics Inc.
1+ parts
100+ parts
$2.880
1k+ parts
$2.500
10k+ parts
-
Vyrian
Digiode
Anansix
Greenchips
SIE Connect GmbH - GreenChips
Rebound Electronics
Electronic Expediters
Prism Electronics
Q Components
DF Sales Co.
Resion
Odintec Ltd.
PC Components Company LLC
Bristol Electronics
LittleDiode
Mentor Electronics Marketing, LLC
Parana Technologies
$2.633
$2.449
IDEA Electronic Components Group
$2.831
$2.689
Corohmni
DigiPath Technology Company
$4.416
$4.240
MARBEL Systems
$5.450
One Stop Electronics
$5.500
Texas Native Microelectronics
$6.264
$6.013
$5.826
$5.512
Kenton Components
$7.517
$6.615
AZTECH Wire
$13.406
Semicontronic
$13.500
$13.162
$13.095
Qasali Group International
$16.913
$15.729
$14.883
A-Z Elektronik GmbH
Kepictronics
Corphita
Infinite Electronics LLP (Excess)
Perfect Parts
Assy Fe
Plastic/Epoxy material makes the package lightweight and durable, ensuring longevity and ease of handling.
High maximum operating temperature allows for reliable performance in various environments without risk of overheating.
Wide voltage differential capability provides flexibility in input and output voltage requirements for different applications.
Bipolar technology offers stable and precise voltage regulation, ensuring consistent output under varying load conditions.
Rectangular shape allows for easy integration into circuit boards and offers a compact design for space-constrained applications.
Through-hole terminals provide secure and reliable connections to the circuit board, ensuring stable operation.
Low minimum operating temperature allows for use in a wide range of environments, from cold to hot conditions.
Low minimum output voltage allows for precise voltage regulation even at low output levels, suitable for sensitive electronic components.
Three terminals offer simple connectivity and ease of installation, minimizing complexity in circuit design.
Flange mount package style provides secure and stable mounting options, ideal for applications where vibration or movement is a concern.
Low minimum input-output voltage differential allows for efficient voltage regulation in applications with tight voltage constraints.
Adjustable positive single output standard regulator offers flexibility in voltage settings, making it versatile for a variety of applications.
Tin lead over nickel terminal finish provides excellent conductivity and corrosion resistance, ensuring reliable connections over time.
Single terminal position simplifies installation and reduces the risk of wiring errors, promoting ease of use.
High maximum output voltage allows for voltage regulation in a wide range of applications, accommodating different voltage requirements.
High maximum output current capability enables the regulator to power devices with higher current demands, expanding its application range.
Adjustable Regulators - Positive Single Output Standard LT317AT attributes and parameters. Explore more Adjustable Regulators - Positive Single Output Standard devices from Analog Devices
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Position:
LT317AT Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-311-1897, 5962013111897
NIIN
013111897
Analog Devices Inc. (ADI) is one of the leading companies in the areas of integrated circuit (IC) design, manufacturing, testing, and marketing. ADI is known for their high-performance semiconductor solutions which enable customers to create innovative systems that solve critical challenges. The company has over 40 years of experience in the industry and has been consistently recognized as an industry leader for its innovation as well as its commitment to quality products and services. They have garnered numerous awards throughout the years including awards from Gartner Magic Quadrant for Industrial IoT Platforms; Frost & Sullivan’s Global Product Leadership Award; and various awards relating to automotive safety technology such as JESD209-3 Automotive Grade Certifications from AEC-Q100.
CEO
Vincent Roche
Interim CFO
James Mollica
CAO
Michael Sondel
Limerick Fab
Fabrication
Fab Initiation
1977
Ireland
Limerick
Wafer Capacity
30,000
Hillview Fab
2001
USA
Milpitas
15,000
Wilmington Fab
1967
Wilmington
50,000
Camas Fab
1997
Camas
18,000
Beaverton-Portland
1987
Beaverton
14,000
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
AT90CAN128-16AU
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RHFL4913SCA07V
RHFL4913SCA07V by STMicroelectronics is an adjustable positive regulator with a max output of 9V and 1A current. It operates b/w -55 °C to 125 °C, housed in a compact ceramic package. Ideal for precision voltage regulation in various electronic applications.
LT1020CSW#TRPBF
Analog Devices
LT1020CSW#TRPBF by Analog Devices is an adjustable positive single output standard regulator with a max input-output voltage differential of 33.5V, making it suitable for various applications requiring precise voltage regulation. With a max load regulation of 0.4% and a max output current of 0.125A, this bipolar technology-based regulator offers reliable performance in compact electronic devices operating within a temperature range of 0 to 100 °C.
LM317KCT
LM317KCT by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates within a temperature range of 0-125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals, offering flexibility and ease of use in different designs.
LM317LMX/NOPB
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
LM117HVH
LM117HVH by Texas Instruments is an adjustable positive single output standard regulator with a max output current of 1.5A and a max input-output voltage differential of 60V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in harsh environments. The package style is cylindrical with a terminal finish of gold, ideal for industrial and automotive electronics.
LM117H/883B
National Semiconductor
LM117H/883B by National Semiconductor is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for industrial applications requiring precise voltage regulation. With a package style of cylindrical and terminal finish of tin lead, this regulator is ideal for various electronic systems needing stable power supply.
LM350AT
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1 %; No. of Functions: 1;
LM723E/883
LM723E/883 by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and load regulation of 0.6%. Operating temperature ranges from -55 to 125°C, making it suitable for military applications requiring high reliability in harsh environments. Its MIL-STD-883 screening level ensures robust performance in critical systems.
5962-9951706QZA
The Texas Instruments 5962-9951706QZA is an adjustable positive single output standard regulator with a max output current of 1.5A and a min operating temperature of -55°C. It features a ceramic, glass-sealed package body material and is suitable for applications requiring precise voltage regulation in harsh environments.
LP3878MRX-ADJ/NOPB
LP3878MRX-ADJ/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 5.5V and max output current of 0.8A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM317LM/NOPB
LM317LM/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications. With a max output current of 0.1A and small outline package style, it offers precise regulation in compact designs.
LM317AEMP
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.8 mm; JESD-30 Code: R-PDSO-G3;
LM138KSTEEL
LM138KSTEEL by Texas Instruments is an adjustable positive single output standard regulator with a max output current of 5A and a max input-output voltage differential of 35V. It operates in temperatures ranging from -55°C to 125°C, making it suitable for various applications requiring precise voltage regulation in harsh environments. The package body material is metal, and the technology used is bipolar, ensuring reliable performance and durability.
LR645LG-G
Supertex
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; No. of Functions: 1; No. of Outputs: 1;
MAX8719ETA+T
MAX8719ETA+T by Analog Devices is an adjustable positive single output standard regulator with a max output voltage of 28V and max output current of 0.1A. It operates at temperatures up to 150 °C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The surface-mount package style with a very thin profile and small outline enhances its versatility in space-constrained designs.
MC1723CP
MC1723CP by Onsemi is an adjustable positive single output standard regulator with a max output voltage of 37V and max current of 0.15A. It operates in temperatures ranging from -65 to 175°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM317BD2TR4
LM317BD2TR4 by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LM117HVH-883B
Tt Electronics Plc
LM117HVH-883B by Tt Electronics Plc is an adjustable positive single output standard regulator with a max output current of 1.5 A. It operates in a temperature range of -55 to 150 °C and is suitable for applications requiring reliable voltage regulation in harsh environments.
LM117HVHMDR
LM117HVHMDR by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 57V and a max input voltage of 60V. Operating temperature ranges from -55 to 150°C, making it suitable for various applications in harsh environments. With a total dose of 100k Rad(Si), this surface-mount regulator offers precise voltage regulation for aerospace and defense systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADN4693E-1BCPZ-RL7
ADN4693E-1BCPZ-RL7 by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It offers a max transmit delay of 2.4ns and max supply current of 24mA. Ideal for applications requiring differential output and EIA/TIA interface standards compliance in tight spaces due to its very thin profile chip carrier package style.
AD3542RBCPZ16
AD3542RBCPZ16 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V and linearity error of 0.006103%. It features a nominal settling time of 0.1us, making it ideal for applications requiring precise analog signal generation in temperature-sensitive environments. With a compact square package shape and surface mount capability, this chip carrier is suitable for space-constrained designs where high performance is essential.
ADMV8420ACPZ-R5
ADMV8420ACPZ-R5 by Analog Devices is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50 OHM. It operates b/w -40 to 85 °C and is ideal for applications requiring precise frequency filtering in electronic circuits.
ADN4693E-1BCPZ
ADN4693E-1BCPZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V nominal voltage. It features a max transmit delay of 2.4ns and differential output for EIA/TIA-899 interface standard applications in industrial settings.
ADPA7005AEHZ
ADPA7005AEHZ by Analog Devices is a wide band medium power RF amplifier with 12 dB gain. It operates b/w 18-44 GHz, handling up to 27 dBm CW input power. Ideal for applications requiring high frequency amplification in temperatures ranging from -40 to 85°C.
ADPA7005AEHZ-R7
ADPA7005AEHZ-R7 by Analog Devices is a wide band medium power RF amplifier with 12 dB gain, operating from 18-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -40 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADPA7005CHIP
ADPA7005CHIP by Analog Devices is a wide band medium power RF amplifier with 11.5 dB gain, operating from 20-44 GHz. It can handle up to 27 dBm CW input power and operates in temperatures ranging from -55 °C to 85°C. Ideal for applications requiring high frequency amplification in RF & microwave systems.
ADMV8420ACPZ
Analog Devices' ADMV8420ACPZ is a 24-terminal BAND PASS FILTER with a Center Frequency of 15500 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for applications requiring precise filtering in electronic systems.
AD3542RBCPZ16-RL7
AD3542RBCPZ16-RL7 by Analog Devices is a 16-bit D/A converter with max analog output voltage of 7.5V, 0.006103% linearity error, and 0.1us settling time. Ideal for applications requiring precise analog signal generation in temperature-sensitive environments.
ADAQ23876BBCZ
Analog Devices' ADAQ23876BBCZ is a 16-bit ADC with 0.00125% EL, 15 MHz sample rate, and 2'S COMPLEMENT BINARY output. Ideal for wireless data acquisition applications due to its compact GRID ARRAY package and fast 0.063 us conversion time. Operating from -40 to 85 °C, it offers precise analog-to-digital conversion in a small form factor.
LT317AHVH
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-39; Terminal Form: WIRE; Maximum Output Current-1: .01 A; Adjustability: ADJUSTABLE;
LT317AHVK
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-3; Terminal Form: PIN/PEG; Package Style (Meter): FLANGE MOUNT; Maximum Output Current-1: .01 A;
LT317AT#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN OVER NICKEL; Maximum Input-Output Voltage Differential: 40 V;
LT317AH
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Operating Temperature (TJ-Min): 0 Cel; JESD-609 Code: e0; Nominal Dropout Voltage-1: 3 V;
LT317AK
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-3; Terminal Form: PIN/PEG; Package Style (Meter): FLANGE MOUNT; Package Body Material: METAL;
LT317AT
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Maximum Output Voltage-1: 37 V; Minimum Input-Output Voltage Differential: 3 V;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Output Voltage-1: 1.2 V; Maximum Output Current-1: 1.5 A; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved