Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCS2333DR2G by Onsemi is a dual operational amplifier with low-offset and low-bias features. It operates at a nominal voltage of 3.3V, offering a min voltage gain of 199526.23 and a unity gain bandwidth of 255 kHz. Ideal for automotive applications due to its micropower design and wide temperature range from -40°C to 125°C.
Median Price
$1.150
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.100
100+ parts
$0.860
1k+ parts
$0.792
10k+ parts
-
Farnell
$1.160
$0.681
$0.504
$0.494
Mouser Electronics
$1.230
$0.713
$0.613
DigiKey
$0.712
$0.628
Newark
$1.270
$0.733
$0.647
Flip Electronics (Authorized)
Element14
$0.855
$0.815
Verical
$0.780
$0.740
RS (Exports)
$0.829
Rochester
$0.697
$0.579
$0.516
Nova Conductors
$0.984
Digiode
$1.520
Flip Electronics
Chip Stock
Vyrian
NAC Semi
$1.020
IBS Electronics
$0.856
Ampacity Inc.
$0.700
Semicontronic
$0.682
$0.679
Corohmni
$0.802
Netroflash
$0.965
Vigor
$1.050
Corphita
$1.440
Component Stockers USA
$1.860
$1.260
$0.850
Continental Prestige Electronics
$2.010
Microchip USA
$5.953
Aztec Data Supply Inc.
$6.337
Perfect Parts
Lixinc
Futuretech Components
Authorized Procurement Solutions
Argo Parts USA
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Kepictronics
UHIMA Technologies
This material provides durability and reliability for the operational amplifier, making it suitable for various applications.
Low input offset voltage ensures accuracy in signal amplification and processing.
Suitable for surface mounting on PCBs, allowing for compact and efficient circuit design.
High common mode rejection ratio helps in eliminating unwanted noise and interference in the signal.
Operates within a low supply voltage range, making it suitable for low power applications.
Allows for stable and accurate operation over a range of frequencies.
High voltage gain capability for precision signal amplification.
Designed to withstand automotive temperature conditions, making it suitable for automotive applications.
Specifically designed for amplifying analog signals with high accuracy and low distortion.
Operational Amplifiers (Op Amps) NCS2333DR2G attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Onsemi
Amplifier Type:
Architecture:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Nominal Slew Rate:
Maximum Input Offset Current (IIO):
Peak Bias Current:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
NCS2333DR2G Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
General Diode
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
AB26TRB-32.768KHZ--T
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
JM38510/13501BGA
Analog Devices
JM38510/13501BGA by Analog Devices is a MILITARY-grade Op Amp with 60uV Max Input Offset Voltage, 600kHz Unity Gain Bandwidth, and 106dB CMRR. Ideal for applications requiring high precision amplification in harsh environments due to its -55 to 125 °C operating range and low bias current of 0.004uA.
LM358DGKR
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
LMC7101BIM5
LMC7101BIM5 by Texas Instruments is a micropower operational amplifier with low-bias and CMOS technology. It features a max input offset voltage of 9000 uV, nominal unity gain bandwidth of 1000 kHz, and min slew rate of 0.4 V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA2171AIDGKR
OPA2171AIDGKR by Texas Instruments is a dual operational amplifier with a max input offset voltage of 2000 uV and a nominal voltage of +-18 V. With low-bias and micropower features, it is ideal for automotive applications requiring high precision and low power consumption. The amplifier's compact package style, small outline, and thin profile make it suitable for space-constrained designs in various electronic systems.
INA132UA/2K5E4
Texas Instruments' INA132UA/2K5E4 is an Operational Amplifier with 250uV Max Input Offset Voltage, 90dB CMRR, and -40 to 85°C Operating Temp. Ideal for applications requiring low-offset precision amplification in compact designs due to its small outline package and voltage-feedback architecture.
OPA2228UA/2K5
OPA2228UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 200 uV and bias current of 0.01 uA. It operates at a supply voltage of +-15 V, has a unity gain bandwidth of 33 MHz, and is ideal for industrial applications requiring precise signal amplification in compact spaces.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
JM38510/13503BPA
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM324DTBR2G
LM324DTBR2G by Onsemi is a quad operational amplifier with 4 functions. It has a max input offset voltage of 7000 uV and a nominal voltage of 5V, suitable for applications requiring high common mode rejection ratio. With low bias current and micropower technology, it is ideal for precision signal processing in commercial-grade temperature environments.
MC33072ADR2G
MC33072ADR2G by Onsemi is a dual operational amplifier with a max input offset voltage of 5000 uV. It has a nominal common mode reject ratio of 97 dB and a min slew rate of 8 V/us. This op amp is commonly used in industrial applications requiring high voltage gain and temperature stability.
LM358DR
LM358DR by Texas Instruments is a dual operational amplifier with 2 functions. It features a max input offset voltage of 9000 uV and nominal voltage of 5 V, suitable for applications requiring high common mode rejection ratio and low bias current. With a small outline package style, it is ideal for commercial-grade circuits needing precise amplification within temperature range of 0-70 °C.
LM2904D
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OPA376AIDCKRG4
The Texas Instruments OPA376AIDCKRG4 is a CMOS operational amplifier with low-offset and low-bias features. It offers a max input offset voltage of 25uV, nominal unity gain bandwidth of 5500kHz, and operates at temperatures ranging from -40 to 125°C. Ideal for automotive applications due to its compact size and low power consumption.
OPA2131UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OPA2277PA
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
TLV2371IDBVRG4
TLV2371IDBVRG4 by Texas Instruments is a CMOS Operational Amplifier with low bias current (0.00006 uA), high common mode rejection ratio (72 dB), and wideband unity gain bandwidth (3000 kHz). Ideal for automotive applications due to its small outline, low profile package and temperature grade.
TL084CD
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LM324AN
LM324AN by Texas Instruments is a quad operational amplifier with 4 functions. It features a max input offset voltage of 5000 uV and a nominal common mode reject ratio of 80 dB. Widely used in applications requiring low-bias current amplification, it operates at temperatures up to 70 °C and has a unity gain bandwidth of 1200 kHz.
LM2902D
Samsung
Samsung's LM2902D is a 4-function operational amplifier (Op Amp) with a max input offset voltage of 10000 uV. It is surface mountable and has a small outline package style, making it suitable for industrial applications requiring micropower amplification.
MCP6001T-I/OT-HCM
Microchip Technology
MCP6001T-I/OT-HCM by Microchip is a CMOS Operational Amplifier with 4500uV Max Input Offset Voltage, 76dB CMRR, and 1000kHz Unity Gain Bandwidth. Ideal for industrial applications requiring low-bias amplification in compact designs due to its micropower consumption and small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCS20072DR2G
NCS20072DR2G by Onsemi is a dual operational amplifier with 4000uV max input offset voltage, 125dB CMRR, and 3200kHz unity gain bandwidth. Ideal for automotive applications due to its small outline package, low bias current of 0.0015uA, and wide operating temperature range from -40 to 125°C.
NCS20071SN2T1G
NCS20071SN2T1G by Onsemi is a CMOS operational amplifier with 3200 kHz unity gain bandwidth and 4000 uV max input offset voltage. Ideal for automotive applications, this Op Amp has a small outline package style, operates b/w -40 to 125 °C, and supports a nominal voltage of 5V.
NCS20082DR2G
NCS20082DR2G by Onsemi is a micropower operational amplifier with low-bias current and voltage-feedback architecture. It features a max input offset voltage of 4000 uV, nominal voltage of 3.3 V, and nominal unity gain bandwidth of 1200 kHz. Ideal for automotive applications requiring precise signal amplification in compact designs.
NCS20062DR2G
NCS2005SN1T1G
NCS2005SN1T1G by Onsemi is a small outline, very thin profile operational amplifier with 5 terminals. It features a max input offset voltage of 6000 uV and nominal common mode reject ratio of 96 dB. Ideal for automotive applications due to its high temperature grade and compact design.
NCS20061SQ3T2G
NCS20061SQ3T2G by Onsemi is a CMOS operational amplifier with a max input offset voltage of 4000 uV. It has a nominal common mode reject ratio of 76 dB and a nominal unity gain bandwidth of 3000 kHz. This amplifier is suitable for automotive applications due to its temperature grade and small package size.
NCS20072DTBR2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
NCS20074DR2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
NCS20072DMR2G
NCS20072DMR2G by Onsemi is a dual operational amplifier with 125 dB CMRR, 3200 kHz unity gain bandwidth, and 2.7 V/us slow rate. Ideal for automotive applications due to its small outline package, wide temperature range (-40 to 125 °C), and low bias current (0.0015 uA).
NCS20081SN2T1G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR;
NCS2004MUTAG
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
NCS20034DR2G
NCS20091SQ3T2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
NCS20061SN3T1G
NCS20061SN3T1G by Onsemi is a CMOS Operational Amplifier with 3000 kHz Unity Gain Bandwidth and 76 dB Common Mode Reject Ratio. It operates in Automotive grade applications, offering low bias current of 0.0015 uA and high input offset voltage of 4000 uV. This Op Amp comes in a small outline package suitable for surface mount assembly.
NCS2333DMR2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
NCS21673SN2G050T1G
OPERATIONAL AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSOP2; Package Shape: RECTANGULAR; Architecture: VOLTAGE-FEEDBACK;
NCS2004AMUTAG
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
NCS20062DMR2G
NCS20062DMR2G by Onsemi is an Operational Amplifier with 76dB CMRR, 3000kHz Unity Gain Bandwidth, and -40 to 125°C operating temp. Ideal for automotive applications due to its small size, low bias current of 0.0015uA, and wide supply voltage range of 3.3-7V.
NCS20231XV53T2G
OPERATIONAL AMPLIFIER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved