Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCS2333DMR2G by Onsemi is an Operational Amplifier with low-offset and low-bias features. It has a Nominal Unity Gain Bandwidth of 255 kHz, making it suitable for automotive applications. With a Max Supply Voltage Limit of 7V, this Op Amp operates efficiently in temperatures ranging from -40 to 125 °C.
Median Price
$0.477
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.890
100+ parts
$0.505
1k+ parts
$0.436
10k+ parts
$0.397
DigiKey
$0.504
$0.435
-
Rochester
$0.460
$0.382
$0.341
Verical
$0.426
Future Electronics
$0.390
Digiode
Nova Conductors
$0.615
Vyrian
Flip Electronics
Chip Stock
NAC Semi
$0.664
Cyclops Electronics Ltd
Semicontronic
$0.075
$0.073
Ampacity Inc.
$0.433
Corphita
$0.478
Corohmni
$0.531
Continental Prestige Electronics
$0.602
Argo Parts USA
$0.596
Vigor
$1.120
Microchip USA
$3.692
Perfect Parts
Lixinc
Kulean Microsystems
Problanco Electronics
iodParts Technologies Inc.
TANS Electronics
SupplyDigital Components
Netroflash
$0.584
$0.572
UHIMA Technologies
GreenTree Electronics
Provides durability and protection for the internal components of the operational amplifier.
Low input offset voltage ensures accuracy in signal amplification and processing.
Low bias current helps in reducing power consumption and improving overall efficiency.
Allows for easy and convenient mounting on PCBs, saving space and simplifying assembly.
High common mode rejection ratio ensures that common noise in the input signal is suppressed effectively.
Compatible with standard power supply voltages, making it versatile for various applications.
High minimum voltage gain allows for efficient amplification of weak input signals.
Wide operating temperature range enables reliable performance in harsh environments.
Designed specifically for amplifying and processing analog signals accurately and efficiently.
Operational Amplifiers (Op Amps) NCS2333DMR2G attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Onsemi
Amplifier Type:
Architecture:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Nominal Slew Rate:
Maximum Input Offset Current (IIO):
Peak Bias Current:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
NCS2333DMR2G Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Design/Specification - Case Outline Rev 12/Aug/2020
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Boca Semiconductor
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
BAV99-7-F
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LMC7101BIM5X/NOPB
Texas Instruments
LMC7101BIM5X/NOPB by Texas Instruments is a micropower operational amplifier with low-bias current and CMOS technology. It features a max input offset voltage of 9000 uV, nominal voltage of 3 V, and min slew rate of 0.4 V/us. Ideal for industrial applications requiring high precision and low power consumption.
LM324D
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
LM7301IM5X/NOPB
LM7301IM5X/NOPB by Texas Instruments is a CMOS Operational Amplifier with 8000uV Max Input Offset Voltage, 82dB Nominal CMRR, and 4000kHz Unity Gain Bandwidth. Ideal for industrial applications requiring low power consumption and high precision signal amplification in compact designs.
LM324DTBR2G
LM324DTBR2G by Onsemi is a quad operational amplifier with 4 functions. It has a max input offset voltage of 7000 uV and a nominal voltage of 5V, suitable for applications requiring high common mode rejection ratio. With low bias current and micropower technology, it is ideal for precision signal processing in commercial-grade temperature environments.
TL072CP
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OPA551FA/500G3
OPA551FA/500G3 by Texas Instruments is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 102dB, and unity gain bandwidth of 3000kHz. Ideal for automotive applications, it operates at temperatures ranging from -40 to 125°C and supports power supplies of +-4/+-30/8/60V.
LM324AD
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LM324ADG
LM324ADG by Onsemi is a quad operational amplifier with 4 functions. It features a max input offset voltage of 3000 uV and a nominal common mode reject ratio of 70 dB. With micropower technology, it is ideal for applications requiring low bias current and high voltage gain in commercial temperature grades.
OPA2228UA/2K5
OPA2228UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 200 uV and bias current of 0.01 uA. It operates at a supply voltage of +-15 V, has a unity gain bandwidth of 33 MHz, and is ideal for industrial applications requiring precise signal amplification in compact spaces.
OPA548FKTWTG3
OPA548FKTWTG3 by Texas Instruments is an Operational Amplifier with a max input offset voltage of 10000 uV, nominal voltage of 30 V, and unity gain bandwidth of 1000 kHz. Ideal for industrial applications requiring high precision amplification in a compact package with surface mount capability.
OP07CSZ-REEL
Analog Devices
Analog Devices' OP07CSZ-REEL is a voltage-feedback operational amplifier with 250uV max input offset voltage, 120dB nominal CMRR, and 100000 min voltage gain. Ideal for industrial applications requiring low-offset amplification in a compact SMD package.
OPA333AIDBVR
OPA333AIDBVR by Texas Instruments is a low-offset operational amplifier with a max input offset voltage of 10uV. It has a nominal common mode reject ratio of 130dB and operates at a max supply voltage of 7V. This op amp is commonly used in automotive applications due to its low-bias and micropower features.
LM2902DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: LSOP; Package Shape: RECTANGULAR;
LM2904MX
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM2902N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
LMC6484IM/NOPB
LMC6484IM/NOPB by Texas Instruments is a CMOS operational amplifier with 4 functions, low bias current of 0.000004 uA, and unity gain bandwidth of 1500 kHz. It is ideal for industrial applications requiring high voltage feedback architecture, such as precision instrumentation and sensor signal conditioning.
OPA2171AIDCUT
OPA2171AIDCUT by Texas Instruments is a micropower operational amplifier with low-bias current and high common mode rejection ratio. Featuring a unity gain bandwidth of 3 MHz, it operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a compact package style and surface-mount capability, this op amp offers precise signal amplification in space-constrained designs.
LM741CMWC
Rochester Electronics
OPERATIONAL AMPLIFIER; Terminal Form: NO LEAD; Package Code: DIE; Package Shape: UNSPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Surface Mount: YES;
INA200AIDGKR
Texas Instruments' INA200AIDGKR is an operational amplifier with a max input offset voltage of 2500uV and a max average bias current of 16uA. This IC, suitable for automotive applications, features a nominal voltage of 12V and a common mode voltage up to 80V. With a response time of 1300ns, it operates in temperatures ranging from -40°C to 125°C.
AD8629ARZ-REEL7
AD8629ARZ-REEL7 by Analog Devices is an Operational Amplifier with low-offset voltage of 10 uV, bias current of 0.0015 uA, and common mode reject ratio of 130 dB. Ideal for automotive applications due to its CMOS technology, chopper-stab architecture, and wide operating temperature range from -40 to 125 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCS20072DR2G
NCS20072DR2G by Onsemi is a dual operational amplifier with 4000uV max input offset voltage, 125dB CMRR, and 3200kHz unity gain bandwidth. Ideal for automotive applications due to its small outline package, low bias current of 0.0015uA, and wide operating temperature range from -40 to 125°C.
NCS20071SN2T1G
NCS20071SN2T1G by Onsemi is a CMOS operational amplifier with 3200 kHz unity gain bandwidth and 4000 uV max input offset voltage. Ideal for automotive applications, this Op Amp has a small outline package style, operates b/w -40 to 125 °C, and supports a nominal voltage of 5V.
NCS20082DR2G
NCS20082DR2G by Onsemi is a micropower operational amplifier with low-bias current and voltage-feedback architecture. It features a max input offset voltage of 4000 uV, nominal voltage of 3.3 V, and nominal unity gain bandwidth of 1200 kHz. Ideal for automotive applications requiring precise signal amplification in compact designs.
NCS20062DR2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCS2005SN1T1G
NCS2005SN1T1G by Onsemi is a small outline, very thin profile operational amplifier with 5 terminals. It features a max input offset voltage of 6000 uV and nominal common mode reject ratio of 96 dB. Ideal for automotive applications due to its high temperature grade and compact design.
NCS20061SQ3T2G
NCS20061SQ3T2G by Onsemi is a CMOS operational amplifier with a max input offset voltage of 4000 uV. It has a nominal common mode reject ratio of 76 dB and a nominal unity gain bandwidth of 3000 kHz. This amplifier is suitable for automotive applications due to its temperature grade and small package size.
NCS20072DTBR2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
NCS20074DR2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
NCS20072DMR2G
NCS20072DMR2G by Onsemi is a dual operational amplifier with 125 dB CMRR, 3200 kHz unity gain bandwidth, and 2.7 V/us slow rate. Ideal for automotive applications due to its small outline package, wide temperature range (-40 to 125 °C), and low bias current (0.0015 uA).
NCS20081SN2T1G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR;
NCS2004MUTAG
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
NCS2333DR2G
NCS20034DR2G
NCS20091SQ3T2G
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
NCS20061SN3T1G
NCS20061SN3T1G by Onsemi is a CMOS Operational Amplifier with 3000 kHz Unity Gain Bandwidth and 76 dB Common Mode Reject Ratio. It operates in Automotive grade applications, offering low bias current of 0.0015 uA and high input offset voltage of 4000 uV. This Op Amp comes in a small outline package suitable for surface mount assembly.
NCS21673SN2G050T1G
OPERATIONAL AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSOP2; Package Shape: RECTANGULAR; Architecture: VOLTAGE-FEEDBACK;
NCS2004AMUTAG
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
NCS20062DMR2G
NCS20062DMR2G by Onsemi is an Operational Amplifier with 76dB CMRR, 3000kHz Unity Gain Bandwidth, and -40 to 125°C operating temp. Ideal for automotive applications due to its small size, low bias current of 0.0015uA, and wide supply voltage range of 3.3-7V.
NCS20231XV53T2G
OPERATIONAL AMPLIFIER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved