Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP502SQ35T2G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.5V and max dropout voltage of 1.2V. It operates in temperatures ranging from -40 to 85 °C, making it suitable for various applications requiring stable voltage regulation in compact designs.
Median Price
$0.305
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.317
1k+ parts
$0.263
10k+ parts
$0.234
Verical
$0.293
Digiode
$0.258
Bristol Electronics
$0.525
$0.194
$0.168
Chip Stock
Vyrian
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Corphita
$0.245
Corohmni
$0.272
Vigor
$0.740
AZTECH Wire
$8.020
Perfect Parts
SupplyDigital Components
TANS Electronics
Problanco Electronics
UHIMA Technologies
Microchip USA
Kulean Microsystems
The plastic/epoxy material used in the package body provides durability and reliability to the product.
With a low maximum dropout voltage, this LDO regulator can maintain a stable output even with small input voltage fluctuations.
The surface mount feature allows for easy and convenient installation on printed circuit boards.
The high operating temperature range makes this LDO regulator suitable for a wide range of operating conditions.
The CMOS technology ensures low power consumption and high efficiency in voltage regulation.
The rectangular shape of the package allows for efficient use of space on the PCB.
The gull wing terminal form provides secure and reliable connections during installation.
The TR packing method ensures protection during shipping and handling.
The minimum output voltage ensures a stable and reliable supply for connected circuits.
The low voltage tolerance ensures precise voltage regulation for sensitive components.
The nominal output voltage provides a steady power supply for connected devices.
The five terminals offer multiple connection options for input and output voltages.
The small outline, thin profile, and shrink pitch package style saves space and enhances portability.
The fixed output voltage eliminates the need for manual adjustments, simplifying the installation process.
The maximum operating temperature ensures reliable performance in standard operating conditions.
The small terminal pitch allows for efficient PCB layout and assembly.
The minimum operating temperature ensures functionality even in extreme cold environments.
The fixed positive single output LDO regulator provides stable and accurate voltage regulation for connected devices.
The matte tin terminal finish offers corrosion resistance and long-term durability.
The dual terminal position allows for flexibility in connection options.
The maximum output voltage ensures compatibility with devices that require higher voltages.
The low maximum seated height saves space and allows for efficient PCB stacking.
The compact width of the LDO regulator enables space-saving installation on the PCB.
The minimum input voltage requirement ensures compatibility with a wide range of power sources.
The maximum output current capability supports a variety of low-power applications.
The nominal dropout voltage ensures efficient power conversion with minimal voltage loss.
The short length of the regulator allows for compact and space-efficient PCB designs.
The high maximum input voltage compatibility makes the regulator suitable for various power sources.
The absolute maximum input voltage rating ensures protection against voltage spikes and surges.
Fixed Regulators - Positive Single Output LDO NCP502SQ35T2G attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
NCP502SQ35T2G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Cheng-yi Electronic
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Temic Semiconductors
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
LM2940SX-5.0/NOPB
LM2940SX-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 1A and dropout voltage of 1V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable 5V power supply such as embedded systems and IoT devices.
LP2985AIM5-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LM2937IMP-12/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
LM2936M-5.0
LM2936M-5.0 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.4V, suitable for applications requiring stable voltage regulation in a compact package. Operating temperature ranges from -40 to 150°C, making it versatile for various environments. This regulator has a max output current of 50mA and input voltage range of 6-60V, ideal for low-power electronic devices.
TPS71533DCKR
TPS71533DCKR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 50mA. It features a small outline, thin profile package style and operates within an extended temperature range from -40°C to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM4132AMF-3.3/NOPB
LM4132AMF-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max dropout voltage of 0.4V, suitable for applications requiring stable power supply in a compact package. It operates within a temperature range of -40°C to 125°C, making it ideal for various electronic devices where space and efficiency are crucial factors.
LT1121IST-5#TRPBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3 %;
TLV1117-50CDCYR
TLV1117-50CDCYR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.3V. It operates at temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
MIC2920A-3.3WS-TR
MIC2920A-3.3WS-TR by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.4A max output current. It features a small outline package, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
LM1117IDTX-3.3/NOPB
LM1117IDTX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.4 V. It is commonly used in applications requiring stable voltage regulation, such as power supplies for microcontrollers or low-power devices.
LP2985-33DBVRG4
LP2985-33DBVRG4 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for applications requiring low dropout voltage and precise voltage regulation.
MIC5283-5.0YME-TR
MIC5283-5.0YME-TR by Microchip is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.15A Max Output Current, and 2.8V Max Dropout Voltage. It is ideal for applications requiring stable voltage regulation in compact spaces due to its low profile package style and small outline design.
LP2950CDT-5.0
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
MIC39100-5.0WS-TR
MIC39100-5.0WS-TR by Microchip is a Fixed Positive Single Output LDO Regulator with 1A max output current, 5V nominal output voltage, and 2% voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and low dropout voltage of 0.41V at 1A load.
LP2985IM5-3.3/NOPB
LP2985IM5-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM2936HVBMAX3.3/NOPB
LM2936HVBMAX3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 0.4V and an operating temperature range of -40°C to 150°C. It is commonly used in applications requiring a stable and regulated output voltage of 3.3V, such as power supplies for microcontrollers or sensors.
NCP1117ST33T3G
NCP1117ST33T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 2% max voltage tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as consumer electronics and industrial control systems.
LP2950ACDT-3.3RG
LP2950ACDT-3.3RG by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.1A and a dropout voltage of 0.45V. It is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
LP2951-33DR
LP2951-33DR by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 30V max input voltage. It is ideal for applications requiring low dropout voltage, such as portable devices and power management systems.
ADP7118ARDZ-3.3-R7
Analog Devices' ADP7118ARDZ-3.3-R7 is a CMOS LDO regulator with 3.3V output, 0.2A current, and 2% voltage tolerance. Ideal for applications requiring fixed positive single output regulators in compact spaces due to its small outline package style and low dropout voltage of 0.45V. Operating temperature range from -40°C to 125°C makes it suitable for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP511SN33T1G
NCP511SN33T1G by Onsemi is a 3.3V fixed positive LDO regulator with a max output current of 0.15A and dropout voltage of 0.2V, suitable for applications requiring stable voltage supply in compact designs. Operating temperature range from -40 to 125°C makes it versatile for various environments, while its small outline package with dual terminals ensures easy integration in space-constrained PCB layouts.
NCP508SQ33T1G
NCP508SQ33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.04A. It has a small outline package style, making it suitable for surface mount applications where precise voltage regulation is required within an operating temperature range of -40 to 125°C. The regulator offers low dropout voltage at 0.3V and excellent line/load regulation for reliable performance in various electronic devices.
NCP5501DT33RKG
NCP5501DT33RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It has a small outline package style, operates at temperatures ranging from -40 to 85°C, and is suitable for applications requiring stable voltage regulation in electronic circuits.
NCP551SN33T1G
NCP551SN33T1G by Onsemi is a 3.3V fixed positive single output LDO regulator with a max dropout voltage of 0.15V and operating temperature up to 150°C. Ideal for applications requiring stable voltage regulation in compact spaces, such as IoT devices or portable electronics.
NCP5662DS33R4G
NCP5662DS33R4G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 2A max output current, and 1.3V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package with surface mount capability.
NCP5663DS15R4G
NCP5663DS15R4G by Onsemi is a fixed positive single output LDO regulator with 1.5V nominal output voltage, 3A max output current, and 1.3V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package, such as consumer electronics and industrial control systems.
NCP553SQ33T1G
NCP553SQ33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.08A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, thin profile, ideal for surface mount assembly with a terminal pitch of 1.3mm.
NCP512SQ50T2G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 3 %;
NCP551SN50T1G
NCP551SN50T1G by Onsemi is a 5V fixed positive single output LDO regulator with a max dropout voltage of 0.15V and max output current of 0.15A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP5501DT50RKG
NCP5501DT50RKG by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.5A max output current. It operates b/w -40 to 85°C, suitable for applications requiring stable voltage regulation in compact spaces. The package style is small outline with a matte tin terminal finish, making it ideal for surface mount designs.
NCP5500DT33RKG
NCP5500DT33RKG by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from -40°C to 150°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
NCP500SN33T1G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 6 V; Maximum Voltage Tolerance: 2.5 %;
NCP502SN33T1G
NCP502SN33T1G by Onsemi is a 3.3V fixed positive single output LDO regulator with a max dropout voltage of 1.2V and max output current of 0.08A. It operates b/w -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces like consumer electronics and IoT devices.
NCP565D2T12G
NCP565D2T12G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1.5A and an operating temperature range from -40°C to 150°C. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in limited space environments.
NCP551SN30T1G
NCP551SN30T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3V and max dropout voltage of 0.15V. It operates in temperatures ranging from -40 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP59301DS50R4G
NCP59301DS50R4G by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage, 3A max output current, and 0.5V max dropout voltage. Ideal for applications requiring stable voltage regulation in a compact package with high efficiency and low dropout characteristics.
NCP565D2T33R4G
NCP565D2T33R4G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 1.5A Max Output Current, and 1.3V Max Dropout Voltage suitable for various applications requiring stable voltage regulation in compact electronic devices.
NCP584HSN18T1G
NCP584HSN18T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 1.8V and max output current of 0.25A. It operates in an extended temperature range from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, low profile, shrink pitch, ideal for space-constrained PCB layouts.
NCP565ST12T3G
NCP565ST12T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1.5A and an operating temperature range from -40°C to 150°C. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in compact spaces.
NCP5501DT33G
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 4.9 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved