Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP4300ADR2G by Onsemi is a dual operational amplifier with 3000uV max input offset voltage, 60dB CMRR, and 700kHz unity gain bandwidth. Ideal for applications requiring precise signal amplification in compact designs.
Median Price
$0.045
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
Digiode
$0.043
Vyrian
Flip Electronics
Chip Stock
Corphita
$0.040
Corohmni
Vigor
$0.240
Advanced Electronics
$5.225
$4.755
$4.284
AZTECH Wire
$19.760
RC Electronics
TANS Electronics
Authorized Procurement Solutions
Problanco Electronics
Microchip USA
SupplyDigital Components
Kulean Microsystems
Perfect Parts
Kepictronics
Assy Fe
Futuretech Components
UHIMA Technologies
The use of plastic/epoxy material for the package body provides durability and protection for the internal components of the operational amplifier.
The low maximum input offset voltage ensures accurate and precise output signal with minimal error.
The surface mount capability allows for easy installation and space-saving on circuit boards.
Operating at a nominal supply voltage of 5V makes it compatible with a wide range of applications and power sources.
The high unity gain bandwidth allows for efficient signal processing and fast response time.
Being an operational amplifier ensures high gain and accurate signal amplification for various circuit applications.
Operational Amplifiers (Op Amps) NCP4300ADR2G attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Onsemi
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Minimum Slew Rate:
Nominal Slew Rate:
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
NCP4300ADR2G Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 09/Oct/2020
PCN Packaging - Mult MSL1 Pkg Rev 20/Dec/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Weitron Technology
NXP Semiconductors
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148W-7-F
Multicomp Pro
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
OPA192IDGKR
Texas Instruments
OPA192IDGKR by Texas Instruments is an Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 25uV, nominal unity gain bandwidth of 10MHz, and operates in automotive temperature grade. Ideal for precision applications requiring high common mode rejection ratio and low bias current consumption.
OP290GPZ
Analog Devices
The Analog Devices OP290GPZ is an operational amplifier with low-offset and micropower features. It offers a max input offset voltage of 750uV, min slew rate of 0.005V/us, and nominal unity gain bandwidth of 20kHz. Ideal for industrial applications requiring precise signal amplification in compact designs.
INA133UA/2K5
INA133UA/2K5 by Texas Instruments is an operational amplifier with 450uV max input offset voltage, 90dB CMRR, and 1.5MHz bandwidth. Ideal for industrial applications requiring low-offset amplification in a compact package.
AD8605ARTZ-REEL7
AD8605ARTZ-REEL7 by Analog Devices is a CMOS Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 750uV, nominal unity gain bandwidth of 10MHz, and operates at temperatures ranging from -40 to 125°C. Ideal for automotive applications due to its compact size and low power consumption.
LM324AD
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LM8261M5X/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
OPA2227UG4
OPA2227UG4 by Texas Instruments is an Operational Amplifier with low offset voltage of 100uV, bias current of 0.01uA, and common mode reject ratio of 138dB. Ideal for industrial applications requiring precise signal amplification in a compact package with dual terminals and voltage-feedback architecture.
LMV358IPT
LMV358IPT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 6000 uV and a nominal common mode reject ratio of 95 dB. It operates at a supply voltage of 5 V, making it suitable for automotive applications requiring micropower amplification in compact spaces. This BICMOS technology-based op amp features low bias current and high unity gain bandwidth, ideal for precision signal processing in harsh environments.
LM324N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
TL074IDT
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LMC7111BIM5X/NOPB
LM258D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OPA1652AIDGK
OPA1652AIDGK by Texas Instruments is a CMOS operational amplifier with low bias current (0.0001 uA) and high common mode reject ratio (110 dB). It operates at a wide temperature range (-40 to 85 °C) and is suitable for industrial applications requiring precise voltage amplification. The package style is small outline, thin profile, shrink pitch, making it ideal for compact designs.
OPA2227U/2K5
OPA2227U/2K5 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates on +/-15V supplies, has a unity gain bandwidth of 8MHz, and features voltage-feedback architecture. Ideal for industrial applications requiring precise signal amplification in compact designs.
MC33072DR2G
MC33072DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage, 97dB CMRR, and 8V/us min slew rate. Ideal for industrial applications requiring precise signal amplification in a compact package. Operates at -40 to 85°C with ±15V supplies and 5.6mA max supply current.
TL072IDR
TL072IDR by Texas Instruments is a dual operational amplifier with 2 functions, featuring low-bias and frequency compensation. With a max supply voltage of ±18V, it offers a nominal unity gain bandwidth of 3MHz. Ideal for industrial applications requiring precise signal amplification in tight spaces due to its small outline package style.
LM358M
LM358AM
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
OP292GSZ-REEL
NCP4300AD
NCP4300ADG
NCP4300ADR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved