Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP1117LPSTADT3G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and dropout voltage of 1.4V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
Median Price
$0.186
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.390
100+ parts
$0.211
1k+ parts
10k+ parts
-
Farnell
$0.180
Rochester
$0.191
$0.158
$0.141
Verical
$0.176
DigiKey
$0.157
Newark
$0.223
$0.182
Element14
$0.263
$0.203
$0.196
Arrow
$0.145
Master Electronics
$0.164
$0.155
Chip1Stop
$0.195
$0.161
Digiode
Nova Conductors
$0.183
Vyrian
Chip Stock
IBS Electronics
$0.206
$0.193
NAC Semi
$0.236
Cyclops Electronics Ltd
Bristol Electronics
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Prism Electronics
Ampacity Inc.
$0.109
Semicontronic
$0.106
Corohmni
$0.128
Corphita
$0.133
Aranea Global
$0.179
$0.172
Argo Parts USA
$0.175
Modulus Dynamics
$0.189
Vigor
$0.480
Microchip USA
$1.043
Aztec Data Supply Inc.
$4.690
Advanced Electronics
$6.658
$6.325
Continental Prestige Electronics
$0.163
Perfect Parts
RC Electronics
iodParts Technologies Inc.
Kepictronics
Authorized Procurement Solutions
SupplyDigital Components
Problanco Electronics
Lixinc
GreenTree Electronics
A-Z Elektronik GmbH
Kulean Microsystems
Futuretech Components
UHIMA Technologies
Robosynatics
Lucentia Tech
$32.089
TANS Electronics
The use of plastic/epoxy material makes the product lightweight and durable, making it suitable for various applications.
The low maximum dropout voltage ensures minimal power loss, increasing efficiency and performance of the regulator.
The surface mount capability allows for easy and convenient installation on circuit boards, saving space and reducing assembly time.
The high maximum operating temperature ensures the regulator can withstand harsh environmental conditions, increasing its reliability and lifespan.
The bipolar technology used in the regulator provides stable output and improved line regulation, contributing to overall performance.
The adjustable feature allows for fine-tuning of the output voltage, making it suitable for a wide range of applications that require precise voltage regulation.
The high maximum output current capability makes the regulator suitable for powering various electronic devices and components efficiently.
Adjustable Regulators - Positive Single Output LDO NCP1117LPSTADT3G attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCP1117LPSTADT3G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
261
Deltrol Controls
Other Relays;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Loras Industries
Excel (Suzhou) Semiconductor
Swampscott Electronics
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
TPS7A4701RGWT
Texas Instruments
TPS7A4701RGWT by Texas Instruments is an adjustable positive LDO regulator with a max output current of 1A and a dropout voltage of 0.45V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style includes chip carrier and heat sink/slug, with a terminal pitch of 0.65mm, ideal for surface mount assembly processes.
LT3085EDCB#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Package Equivalence Code: SOLCC6,.12,20; Operating Temperature (TJ-Max): 125 Cel;
TPS74401KTWT
TPS74401KTWT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 3A and a max dropout voltage of 0.24V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
TPS73201DBVT
TPS73201DBVT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.25A and a max dropout voltage of 0.15V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LT1761ES5-BYP#TRM
Analog Devices
Analog Devices' LT1761ES5-BYP#TRM is an adjustable positive single output LDO regulator with a max output current of 0.1A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS7A1601ADGNR
TPS7A1601ADGNR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 18.5V and a max dropout voltage of 0.5V, suitable for applications requiring precise voltage regulation in a compact form factor. Operating temperature ranges from -40°C to 150°C, making it versatile for various environments. This regulator comes in a small outline package with gull wing terminals, ideal for surface mount applications where space is limited.
LT3080IDD-1#PBF
LT3080IDD-1#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 36V and a max dropout voltage of 0.5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS76801QPWPG4
TPS76801QPWPG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a min input voltage of 2.7V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. Its small outline package with gull wing terminals and moisture sensitivity level of 2 enhances its versatility in surface mount designs.
LT1529IQ#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR;
LM1117IMPX-ADJ
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; Maximum Line Regulation (%/V): .025;
LM1085ISX-ADJ/NOPB
LM1085ISX-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 3A and a dropout voltage of 1.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS78401DBVR
TPS78401DBVR by Texas Instruments is an adjustable positive single output LDO regulator with a min input voltage of 1.65V and max output current of 0.3A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. With a small outline package style and moisture sensitivity level of 2, this regulator is ideal for space-constrained designs that demand high performance and reliability.
TPS7A4501KTTR
TPS7A4501KTTR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5 A and a dropout voltage of 0.45 V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LP2951ACSD
LP2951ACSD by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.1A and a nominal output voltage of 5V. It features a small outline package style, very thin profile, and surface mount capability, making it ideal for applications requiring precise voltage regulation in limited space environments. With a max dropout voltage of 0.6V and operating temperature range from -40°C to 125°C, this regulator offers reliable performance for various electronic devices.
LT3014IDD#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Finish: Matte Tin (Sn); Moisture Sensitivity Level (MSL): 1;
LM317H
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: WIRE; Minimum Input-Output Voltage Differential: 3 V; Terminal Position: BOTTOM; No. of Functions: 1;
LT1965EMS8E#TRPBF
Analog Devices' LT1965EMS8E#TRPBF is an adjustable positive single output LDO regulator with a max output current of 1.1A and dropout voltage of 0.49V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40°C to 125°C, making it ideal for various electronic devices needing stable power supply.
MIC5219YM5-TR
MIC5219YM5-TR by Microchip is an adjustable positive single output LDO regulator with a max dropout voltage of 0.6V and load regulation of 0.7%. It is designed for applications requiring precise voltage regulation in a compact package, suitable for surface mount assembly at temperatures ranging from -40 to 125°C.
ADP7142ACPZN-R7
Analog Devices' ADP7142ACPZN-R7 is an adjustable positive single output LDO regulator with a max output voltage of 39.58V and a max dropout voltage of 0.42V. This CMOS technology-based regulator has a package style of small outline, heat sink/slug, very thin profile, making it suitable for applications requiring precise voltage regulation in compact spaces at temperatures ranging from -40 to 125°C.
LT3042EDD#TRPBF
LT3042EDD#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 15V and a max output current of 0.2A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT3082IST#PBF
LT3082IST#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 38.5V and a dropout voltage of 1.65V. This surface-mount device operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP1117STAT3G
Onsemi
NCP1117STAT3G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP1117DTARKG
NCP1117DTARKG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP133AMXADJTCG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Minimum Output Voltage-1: .8 V; JESD-30 Code: S-PDSO-N6;
NCP1117DTAG
NCP1117DTAG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP164AMTADJTAG
NCP164AMTADJTAG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.3A and operating temperature range from -40 to 150°C. It features a small outline package style, matte tin terminal finish, and very thin profile suitable for various applications requiring precise voltage regulation in compact spaces.
NCP1117DTAT5G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1; Operating Temperature (TJ-Min): -55 Cel;
NCP1117LPDTADJRKG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Terminal Pitch: 2.29 mm; Surface Mount: YES; Peak Reflow Temperature (C): 260;
NCP1117DTA
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -55 Cel; Maximum Line Regulation (%/V): .007;
NCP1117STAT3
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Maximum Output Voltage-1: 18.8 V;
NCP1086D2T-ADJG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR;
NCP1086ST-ADJT3
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Packing Method: TR; Nominal Dropout Voltage-1: 1.05 V;
NCP1117DTARK
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Package Equivalence Code: SMSIP3H,.38,90TB; Minimum Output Voltage-1: 1.25 V;
NCP1117ISTAT3G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.8 mm; Maximum Output Current-1: .8 A;
NCP1086T-ADJG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Packing Method: RAIL; Package Shape: RECTANGULAR; Terminal Position: SINGLE;
NCP1086D2TADJR4G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Length: 10.16 mm; Package Body Material: PLASTIC/EPOXY;
NCP1086ST-ADJT3G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Nominal Dropout Voltage-1: 1.05 V; Maximum Operating Temperature: 70 Cel;
NCP1117DTAT5
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Packing Method: TR; Maximum Output Voltage-1: 18.8 V;
NCP1086D2T-ADJ
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Surface Mount: YES; Packing Method: RAIL;
NCP1086D2T-ADJR4
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Output Current-1: 1.5 A; Maximum Output Voltage-1: 5.5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved