Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP1117DTAT5G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Median Price
$0.193
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.160
10k+ parts
$0.143
Nova Conductors
$0.222
Digiode
$0.265
Chip Stock
Vyrian
Corohmni
$0.218
Argo Parts USA
$0.215
Bastille Electronics
$0.211
$0.200
$0.198
Ampacity Inc.
$0.233
Corphita
$0.251
Vigor
$0.530
AZTECH Wire
$2.810
$2.700
$2.640
$2.590
Kulean Microsystems
Problanco Electronics
RC Electronics
SupplyDigital Components
iodParts Technologies Inc.
A-Z Elektronik GmbH
Futuretech Components
TANS Electronics
Continental Prestige Electronics
$0.237
UHIMA Technologies
Microchip USA
The use of plastic/epoxy material makes the product lightweight and durable, suitable for various applications.
Low dropout voltage ensures efficient power conversion, minimizing heat dissipation and power loss in the system.
Surface mount capability allows for easy integration onto PCBs, saving space and simplifying the assembly process.
High maximum operating temperature enables the regulator to function reliably in demanding environments.
Wide input-output voltage differential provides flexibility in design and compatibility with various input sources.
The bipolar technology used ensures stable and accurate output voltage regulation, enhancing overall performance.
Simple 2-terminal design simplifies installation and connection, making it user-friendly.
The low maximum line regulation indicates consistent output voltage across varying input voltages, ensuring reliability.
Compact width facilitates space-saving installation in tight PCB layouts or electronic devices.
The high maximum output current allows for powering a variety of loads, making it versatile and efficient.
Adjustable Regulators - Positive Single Output LDO NCP1117DTAT5G attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCP1117DTAT5G Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 08/Jul/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Comchip Technology
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Grande Electronics
Temic Semiconductors
Fairchild Semiconductor
Frontier Electronics
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
LT3085EMS8E#TRPBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Technology: BIPOLAR; Minimum Output Voltage-1: 0 V;
LT1761ES5-SD#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Package Shape: RECTANGULAR; Maximum Dropout Voltage-1: .45 V;
ISL80102IRAJZ
Renesas Electronics
ISL80102IRAJZ by Renesas Electronics is an adjustable positive single output LDO regulator with a max output current of 2A and a dropout voltage of 0.125V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3080EMS8E-1#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1; Adjustability: ADJUSTABLE;
LTC1844ES5-BYP#TRMPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Maximum Output Current-1: .15 A;
LT3042HDD#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Finish: MATTE TIN; No. of Functions: 1;
LM2941LD/NOPB
Texas Instruments
LM2941LD/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
ISL80103IRAJZ-TK
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Pitch: .5 mm; Adjustability: ADJUSTABLE;
LT3086EFE#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: HTSSOP; Terminal Form: GULL WING; Package Equivalence Code: TSSOP16,.25; Minimum Input-Output Voltage Differential: 1.15 V;
LM2941SX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Matte Tin (Sn);
LT3014ES5
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Package Body Material: PLASTIC/EPOXY;
LM2941T/NOPB
LM2941T/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 26V. It features a min dropout voltage of 0.5V, making it suitable for applications requiring stable voltage regulation in temperature-sensitive environments up to 125°C. The package style is flange mount, providing ease of installation and thermal management in various electronic devices.
MIC5239YMM-TR
Micrel
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: TSSOP; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; Maximum Time At Peak Reflow Temperature (s): 40;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Pitch: .5 mm; No. of Outputs: 1;
ADP1741ACPZ-R7
Analog Devices
ADP1741ACPZ-R7 by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 2A and dropout voltage of 0.28V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS7A9201DSKR
TPS7A9201DSKR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 2A and a max dropout voltage of 0.4V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS79801QDGNRQ1
TPS79801QDGNRQ1 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.05 A and a max input voltage of 50 V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring precise voltage regulation. With a compact package style and moisture sensitivity level of 2, it is ideal for space-constrained environments where reliability is crucial.
LT1763CS8#PBF
LT1763CS8#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5 A and a max dropout voltage of 0.45 V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LD1117V
LD1117V by STMicroelectronics is an adjustable positive single output LDO regulator with a max output current of 1.3A and a max dropout voltage of 1.2V, suitable for applications requiring stable voltage regulation in a compact package. It operates within a wide temperature range from 0°C to 125°C, making it versatile for various electronic devices. With a max input-output voltage differential of 13.75V, this bipolar technology-based regulator offers efficient power management solutions in through-hole mounting configurations.
LT3045IMSE#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; Surface Mount: YES; Operating Temperature (TJ-Min): -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SPX1117M3-L/TR
Exar
Exar's SPX1117M3-L/TR is an adjustable positive single output LDO regulator with a max output current of 0.8A and dropout voltage of 1.3V. Ideal for applications requiring precise voltage regulation in compact spaces, operating at temperatures ranging from -40 to 125°C.
NCP1117STAT3G
Onsemi
NCP1117STAT3G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP1117LPSTADT3G
NCP1117LPSTADT3G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and dropout voltage of 1.4V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP1117DTARKG
NCP1117DTARKG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP133AMXADJTCG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Minimum Output Voltage-1: .8 V; JESD-30 Code: S-PDSO-N6;
NCP1117DTAG
NCP1117DTAG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP164AMTADJTAG
NCP164AMTADJTAG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.3A and operating temperature range from -40 to 150°C. It features a small outline package style, matte tin terminal finish, and very thin profile suitable for various applications requiring precise voltage regulation in compact spaces.
NCP1117LPDTADJRKG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Terminal Pitch: 2.29 mm; Surface Mount: YES; Peak Reflow Temperature (C): 260;
NCP1117DTA
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -55 Cel; Maximum Line Regulation (%/V): .007;
NCP1117STAT3
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Maximum Output Voltage-1: 18.8 V;
NCP1086D2T-ADJG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR;
NCP1086ST-ADJT3
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Packing Method: TR; Nominal Dropout Voltage-1: 1.05 V;
NCP1117DTARK
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Package Equivalence Code: SMSIP3H,.38,90TB; Minimum Output Voltage-1: 1.25 V;
NCP1117ISTAT3G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.8 mm; Maximum Output Current-1: .8 A;
NCP1086T-ADJG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Packing Method: RAIL; Package Shape: RECTANGULAR; Terminal Position: SINGLE;
NCP1086D2TADJR4G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Length: 10.16 mm; Package Body Material: PLASTIC/EPOXY;
NCP1086ST-ADJT3G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Nominal Dropout Voltage-1: 1.05 V; Maximum Operating Temperature: 70 Cel;
NCP1117DTAT5
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Packing Method: TR; Maximum Output Voltage-1: 18.8 V;
NCP1086D2T-ADJ
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Surface Mount: YES; Packing Method: RAIL;
NCP1086D2T-ADJR4
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Output Current-1: 1.5 A; Maximum Output Voltage-1: 5.5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved