Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP164AMTADJTAG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 0.3A and operating temperature range from -40 to 150°C. It features a small outline package style, matte tin terminal finish, and very thin profile suitable for various applications requiring precise voltage regulation in compact spaces.
Median Price
$0.736
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$0.534
100+ parts
$0.452
1k+ parts
$0.429
10k+ parts
$0.416
DigiKey
$0.860
$0.487
$0.420
-
Mouser Electronics
$0.488
$0.421
$0.378
Newark
$0.865
Chip1Stop
$1.380
Verical
$0.496
Element14
$0.613
$0.458
Farnell
$0.596
$0.475
$0.461
Digiode
$0.417
Flip Electronics
Chip Stock
Vyrian
Nova Conductors
Semicontronic
$0.384
$0.374
$0.372
Ampacity Inc.
Corphita
$0.395
Corohmni
$0.439
Continental Prestige Electronics
$1.050
$0.641
$0.418
Aztec Data Supply Inc.
$9.600
SupplyDigital Components
Microchip USA
Authorized Procurement Solutions
Kulean Microsystems
Futuretech Components
Argo Parts USA
TANS Electronics
Problanco Electronics
Bastille Electronics
UHIMA Technologies
This material provides durability and protection for the components inside, ensuring a longer lifespan for the product.
Allows for easy and secure installation on circuit boards, saving time and effort during assembly.
With a high maximum operating temperature, this regulator can withstand challenging environmental conditions without compromising performance.
Provides a wide range for input-output voltage differentials, making this regulator versatile for various applications.
The square shape allows for efficient use of space on the circuit board, optimizing layout and design.
Eliminates the need for soldering, making installation easier and reducing the risk of damage to the terminals.
With a low minimum operating temperature, this regulator remains functional in cold environments, increasing its usability.
TR packaging ensures safe transportation and storage of the product, minimizing the risk of damage during handling.
Provides precise and stable output voltage, ensuring consistent performance in the connected circuit.
Having multiple terminals allows for more connections, enabling versatility in circuit design and application.
The compact and efficient design of the package makes it suitable for space-restricted applications while still providing effective heat dissipation.
The adjustable feature allows for fine-tuning of the output voltage, catering to specific requirements of the circuit or system.
The small terminal pitch enables high-density mounting on the circuit board, saving space and improving overall layout efficiency.
With a low minimum differential, this regulator can be used in applications with tight voltage requirements, ensuring compatibility.
This specific type of regulator offers precise voltage regulation and low dropout voltage, making it ideal for powering sensitive electronics.
The matte tin finish provides a reliable and durable surface for soldering, ensuring strong connections and long-term performance.
Dual terminal positions offer flexibility in installation and connection options, accommodating different circuit layouts and designs.
The high maximum output voltage ensures compatibility with a wide range of devices and components, enhancing the regulator's versatility.
The low seated height enables a compact and slim profile, making it suitable for applications where space is limited.
With a narrow width, this regulator can fit into tight spaces on the circuit board, allowing for efficient use of available area.
Capable of providing a maximum output current of 0.3 A, making it suitable for powering a range of components and devices.
With a short reflow time, the regulator can withstand high temperatures during assembly, ensuring proper soldering and connection reliability.
Can handle high reflow temperatures during soldering without degrading performance, ensuring a robust and reliable connection to the circuit board.
The short length allows for a compact design, suitable for applications with limited space or where a minimal footprint is desired.
Adjustable Regulators - Positive Single Output LDO NCP164AMTADJTAG attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Onsemi
Adjustability:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCP164AMTADJTAG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bkc Semiconductors
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Microsemi
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Tak Cheong Electronics Holdings
1N4148WS
Multicomp Pro
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
ERJ6ENF10R0V
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
International Semiconductor
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LT3080EMS8E-1#TRPBF
Analog Devices
Analog Devices' LT3080EMS8E-1#TRPBF is an adjustable positive single output LDO regulator with a max output voltage of 36V and a min dropout voltage of 0.5V. This surface-mount device, operating from -40 to 125°C, is ideal for applications requiring precise voltage regulation in compact spaces.
TPS74501PQWDRVRQ1
Texas Instruments
TPS74501PQWDRVRQ1 by Texas Instruments is an adjustable positive LDO regulator with 0.5A output current and 5.5V max output voltage. It operates in a temperature range of -40 to 150°C, making it suitable for automotive applications under AEC-Q100 screening level. The package is small outline with no lead terminals, ideal for surface mount assembly.
TPS7A4501KTTR
TPS7A4501KTTR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5 A and a dropout voltage of 0.45 V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
MIC61300YMME
Micrel
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSSOP; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; Length: 3 mm;
LT3065MPMSE#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; JESD-609 Code: e3; Package Body Material: PLASTIC/EPOXY;
LM2941CS
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Load Regulation (%): .78 %; Peak Reflow Temperature (C): 235;
LT1761ES5-BYP#PBF
LT1761ES5-BYP#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 20V and a dropout voltage of 0.45V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TPS79901DDCRG4
TPS79901DDCRG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.2A and a min input voltage of 2.7V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LT3045HMSE#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH;
TPS7A4001MDGNREP
TPS7A4001MDGNREP by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 90V and a max dropout voltage of 1.3V. It operates in temperatures ranging from -55°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
MIC29302WT
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; Terminal Finish: MATTE TIN; Nominal Dropout Voltage-1: .37 V;
LT3080EMS8E-1#PBF
Analog Devices' LT3080EMS8E-1#PBF is an adjustable positive single output LDO regulator with a max output voltage of 36V and a dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCV1117STAT3G
NCV1117STAT3G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in a wide temperature range from -55°C to 150°C, making it suitable for automotive applications under harsh conditions. The device comes in a small outline package with gull wing terminals, ideal for surface mount assembly.
LT1761IS5-BYP#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Output Current-1: .1 A; Operating Temperature (TJ-Min): -40 Cel;
Microchip Technology
MIC29302WT by Microchip Tech is an adjustable positive single output LDO regulator with max output voltage of 25V and current of 3A. It has a low dropout voltage of 0.37V, making it suitable for applications requiring precise voltage regulation in temperature-sensitive environments. The device comes in a rectangular package style with through-hole terminals, ideal for flange mount configurations.
TPS7A8401ARGRR
TPS7A8401ARGRR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 3A and a max input voltage of 6.5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices. The package style includes chip carrier, heat sink/slug, and very thin profile options for versatile integration.
LM2931CS/NOPB
LM2931CS/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.1 A and a nominal output voltage of 5 V. It has a small outline package style, operates in temperatures ranging from -40 to 125 °C, and is suitable for applications requiring precise voltage regulation in electronic devices.
TPS74701DRCRG4
TPS74701DRCRG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max input voltage of 5.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCV1117DTARKG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Output Current-1: 1 A; Maximum Input-Output Voltage Differential: 10 V;
LT1963AEQ#TRPBF
Analog Devices' LT1963AEQ#TRPBF is an adjustable positive single output LDO regulator with a max output current of 1.5A and dropout voltage of 0.55V. Ideal for applications requiring precise voltage regulation in compact spaces, this bipolar technology-based regulator offers a wide operating temperature range from -40°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP1117STAT3G
NCP1117STAT3G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP1117LPSTADT3G
NCP1117LPSTADT3G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and dropout voltage of 1.4V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
NCP1117DTARKG
NCP1117DTARKG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP133AMXADJTCG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Minimum Output Voltage-1: .8 V; JESD-30 Code: S-PDSO-N6;
NCP1117DTAG
NCP1117DTAG by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
NCP1117DTAT5G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1; Operating Temperature (TJ-Min): -55 Cel;
NCP1117LPDTADJRKG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Terminal Form: GULL WING; Terminal Pitch: 2.29 mm; Surface Mount: YES; Peak Reflow Temperature (C): 260;
NCP1117DTA
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -55 Cel; Maximum Line Regulation (%/V): .007;
NCP1117STAT3
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Maximum Output Voltage-1: 18.8 V;
NCP1086D2T-ADJG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR;
NCP1086ST-ADJT3
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Packing Method: TR; Nominal Dropout Voltage-1: 1.05 V;
NCP1117DTARK
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Package Equivalence Code: SMSIP3H,.38,90TB; Minimum Output Voltage-1: 1.25 V;
NCP1117ISTAT3G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.8 mm; Maximum Output Current-1: .8 A;
NCP1086T-ADJG
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Packing Method: RAIL; Package Shape: RECTANGULAR; Terminal Position: SINGLE;
NCP1086D2TADJR4G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Length: 10.16 mm; Package Body Material: PLASTIC/EPOXY;
NCP1086ST-ADJT3G
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Nominal Dropout Voltage-1: 1.05 V; Maximum Operating Temperature: 70 Cel;
NCP1117DTAT5
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Packing Method: TR; Maximum Output Voltage-1: 18.8 V;
NCP1086D2T-ADJ
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Surface Mount: YES; Packing Method: RAIL;
NCP1086D2T-ADJR4
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Output Current-1: 1.5 A; Maximum Output Voltage-1: 5.5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved