Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi MOC3081M is a single optocoupler with 3V max on-state voltage, 1A peak surge current, and 0.06A max forward current. Ideal for triggering devices in applications requiring high isolation voltage up to 7500V, such as industrial control systems and power supplies.
Median Price
$0.435
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Arrow
1+ parts
$0.358
100+ parts
$0.291
1k+ parts
$0.247
10k+ parts
$0.240
Adafruit Industries
$0.380
$0.361
-
Element14
$0.950
$0.504
$0.464
Mouser Electronics
$1.070
$0.562
$0.445
$0.378
DigiKey
$1.080
$0.446
$0.379
Chip1Stop
$0.462
$0.339
$0.316
Verical
$0.397
Future Electronics
$0.370
$0.350
$0.335
Rochester
$0.322
Digiode
$0.338
Nova Conductors
Maritex
$0.632
$0.433
$0.409
Bristol Electronics
$0.750
$0.278
$0.210
TME
$1.020
$0.416
$0.332
Chip Stock
Cyclops Electronics Ltd
Kruse Electronics AG
Kruse
ACDS - Activité Composants Distribution Service
Vyrian
NAC Semi
$0.617
$0.569
Flip Electronics
IBS Electronics
$0.519
$0.505
$0.491
Schukat
$0.512
$0.425
Rebound Electronics
Resion
Ashlea Components Ltd
QIE Inc.
Aztec Data Supply Inc.
$0.191
Semicontronic
$0.199
$0.194
$0.193
Ampacity Inc.
Corphita
$0.320
Corohmni
$0.343
Aranea Global
$0.372
$0.357
Continental Prestige Electronics
Argo Parts USA
$0.369
Netroflash
Perfect Parts
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Lixinc
TANS Electronics
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
iodParts Technologies Inc.
$0.537
Authorized Procurement Solutions
Kepictronics
Futuretech Components
UHIMA Technologies
Supply Digital
GreenTree Electronics
Giza Technologies, Inc.
Low voltage drop helps in reducing power consumption and heat generation, making it energy efficient.
Simplifies the setup and wiring, making installation easier and more straightforward.
Can handle sudden spikes in current without getting damaged, providing protection to the circuit.
Sufficient current capacity for driving various loads while maintaining stable operation.
Allows for precise and reliable switching of triac outputs with minimal crossover distortion.
Wide operating temperature range ensures reliable performance in various environmental conditions.
Can function in cold temperatures without any issues, suitable for a wide range of applications.
Provides good conductivity and corrosion resistance, ensuring long-term reliability.
Low trigger current requirement helps in minimizing the input power needed for operation.
High off-state voltage tolerance enhances safety and protection against voltage spikes.
Provides a good balance between sensitivity and robustness for triggering the device.
Low leakage current ensures minimal power wastage and improves overall efficiency.
High off-state voltage ensures reliable isolation between input and output circuits.
High isolation voltage rating provides enhanced safety and protection against electrical hazards.
Allows for easy and secure mounting on PCBs, ensuring stability and durability in operation.
Optocoupler Trigger Device Outputs MOC3081M attributes and parameters. Explore more Optocoupler Trigger Device Outputs devices from Onsemi
Additional Features:
Configuration:
Maximum Forward Current:
Maximum Input Trigger Current:
Nominal Input Trigger Current:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Minimum Peak Off-state Voltage:
Peak Surge Current:
Repetitive Off-state Voltage (Peak):
Maximum Reverse Leakage Current:
Sub-Category:
Terminal Finish:
MOC3081M Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - Logo 17/Aug/2017
PCN Packaging - Mult Devices 24/Oct/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
General Semiconductor
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
FODM3053R2-NF098
Onsemi
FODM3053R2-NF098 by Onsemi is a single configuration optocoupler trigger device output with a max on-state voltage of 3V. It has a max forward current of 0.06A and can operate in temperatures ranging from -40°C to 100°C. This optocoupler is commonly used for applications requiring high isolation voltage and control of AC power circuits.
VO4258M-X006
Vishay Intertechnology
VO4258M-X006 by Vishay Intertechnology is a single TRIAC output optocoupler with max operating temp of 100°C. It offers 800V peak repetitive off-state voltage and 5300V isolation voltage. Ideal for applications requiring optoelectronic coupling in environments ranging from -55°C to 100°C.
TLP511GA
Toshiba
Toshiba's TLP511GA is a TRIAC output optocoupler with 1.3V max on-state voltage, 1A peak surge current, and 100°C max operating temp. Ideal for applications requiring high isolation voltage (2500V) and low trigger current (0.007A), such as industrial control systems and power management circuits.
VOT8024AM-T
Vishay Intertechnology's VOT8024AM-T is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 3750V, such as triggering devices in industrial control systems. Operates b/w -55 to 110 °C, making it suitable for various temperature environments.
MOC3033SM
MOC3033SM by Onsemi is a single optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has a 250V repetitive off-state voltage, and provides 7500V isolation. Ideal for triggering devices in applications requiring high isolation levels and reliable performance.
MOC3052SM
Isocom Components
TRIAC OUTPUT OPTOCOUPLER; Terminal Finish: TIN; Nominal Input Trigger Current: 10 mA; No. of Elements: 1; Maximum Forward Current: .05 A; JESD-609 Code: e3;
MOC3042
Isocom
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Maximum Operating Temperature: 70 Cel; No. of Elements: 1; Minimum Peak Off-state Voltage: 400 V; Maximum Forward Current: .05 A; Additional Features: UL RECOGNIZED;
IL4217-X009
Siemens
TRIAC OUTPUT OPTOCOUPLER; Minimum Operating Temperature: -55 Cel; Additional Features: HIGH SENSITIVITY, UL APPROVED; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A; Nominal Input Trigger Current: .7 mA;
TLP3073(D4,F(O
Toshiba's TLP3073(D4,F(O optocoupler has a peak surge current of 1.2A, max forward current of 0.02A, and isolation voltage of 5000V. Ideal for triggering devices in applications requiring high voltage protection and signal isolation.
FODM3012
The Onsemi FODM3012 is a single TRIAC output optocoupler with a max on-state voltage of 3V and forward current of 0.06A. It operates b/w -40 to 100°C, has an isolation voltage of 3750V, and is suitable for applications requiring optocoupler trigger device outputs in surface mount configurations.
FODM3012R2_NF098
FODM3012R2_NF098 by Onsemi is a TRIAC OUTPUT OPTOCOUPLER with max. on-state voltage of 3V and max. forward current of 0.06A. It operates b/w -40°C to 100°C, has an isolation voltage of 3750V, and is ideal for optocoupler trigger device outputs in various applications.
MOC3061SR2M
The Onsemi MOC3061SR2M is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Operating from -40 to 85°C, it offers 600V repetitive off-state voltage and 7500V isolation for applications like trigger devices in industrial control systems.
MOC3021SVM
The Onsemi MOC3021SVM is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 1A. It operates b/w -40 to 85°C, has an isolation voltage of 5300V, and is ideal for triggering devices in applications requiring high-voltage protection.
MOC3043SM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Peak Surge Current: 1 A; Minimum Peak Off-state Voltage: 400 V; Maximum On State Voltage: 3 V;
MOC3162TVM
The Onsemi MOC3162TVM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85 °C, with 600V repetitive off-state voltage. Ideal for triggering devices in applications requiring high isolation voltage up to 4170V.
MOC3061TVM
The Onsemi MOC3061TVM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for applications requiring high isolation voltage of 7500V, operating temperature range from -40 to 85 °C, and through-hole mounting.
MOC3012
The Texas Instruments MOC3012 is a single optocoupler trigger device with a max forward current of 0.05A and isolation voltage of 7500V. It operates b/w -40°C to 100°C, with a nominal input trigger current of 5mA. Ideal for applications requiring TRIAC output optocouplers with a min peak off-state voltage of 250V and max on-state current of 0.1A.
VO3053-X007T
VO3053-X007T by Vishay Intertechnology is a single optocoupler with peak surge current of 1A, max forward current of 0.06A, and max operating temp of 100°C. Ideal for triggering devices in applications requiring high isolation voltage up to 4420V, such as industrial control systems and power supplies.
MOC3042XSM
MOC3042XSM by Isocom Components is a single optocoupler with triac output. It has a max forward current of 0.05A, isolation voltage of 5300V, and min peak off-state voltage of 400V. Ideal for applications requiring high isolation and reliable triggering in temperatures ranging from -40°C to 100°C.
FOD4216SDV
FOD4216SDV by Onsemi is a single TRIAC output optocoupler with a max on-state voltage of 3V and peak surge current of 3A. It operates b/w -55 °C to 100°C, has an isolation voltage of 5000V, and is ideal for triggering devices in applications requiring high electrical isolation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MOC3063SM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Input Trigger Current: 5 mA; Maximum Operating Temperature: 85 Cel; Peak Surge Current: 1 A;
The Onsemi MOC3063SM is a single TRIAC output optocoupler with 3V max on-state voltage and 1A peak surge current. It operates b/w -40 to 85°C, has a repetitive off-state voltage of 600V, and offers isolation up to 4170V. Ideal for triggering devices in applications requiring high-voltage protection and signal isolation.
MOC3063S-TA1
Lite-on Technology
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Maximum Forward Current: .05 A; Maximum Isolation Voltage: 5000 V; No. of Elements: 1;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Configuration: SINGLE; Maximum Input Trigger Current: .01 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
MOC3043M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 7500 V; Maximum Operating Temperature: 85 Cel; Maximum On State Current: .1 A;
The Onsemi MOC3043M is a single optocoupler with 3V max on-state voltage and 1A peak surge current. Ideal for triggering devices, it operates b/w -40 to 85°C, offers 7500V isolation voltage, and has a max input trigger current of 0.005A.
MOC3023SM
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Peak Surge Current: 1 A; Minimum Peak Off-state Voltage: 400 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; JESD-609 Code: e3; Configuration: SINGLE; Maximum On State Voltage: 3 V;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Peak Off-state Voltage: 400 V; Maximum Forward Current: .06 A; Minimum Operating Temperature: -40 Cel;
MOC3021SM
Harris Semiconductor
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Leakage Current: .0000001 A; Repetitive Off-state Voltage (Peak): 400 V; Maximum Input Trigger Current: .015 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Repetitive Off-state Voltage (Peak): 400 V; Maximum Operating Temperature: 100 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Maximum Reverse Leakage Current: .0001 A; Minimum Peak Off-state Voltage: 400 V; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Peak Surge Current: 1 A; Maximum Operating Temperature: 100 Cel; Maximum Reverse Leakage Current: .0001 A;
TRIAC OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Input Trigger Current: .015 A; Peak Surge Current: 1 A; Configuration: SINGLE;
MOC3063SR2VM
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel; Peak Surge Current: 1 A; Maximum Operating Temperature: 85 Cel;
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; Minimum Peak Off-state Voltage: 600 V;
MOC3083SR2M
TRIAC OUTPUT OPTOCOUPLER WITH ZERO CRSVR; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum On State Voltage: 3 V; No. of Elements: 1; Maximum Reverse Leakage Current: .0001 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved