Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC74LVX4051D by Onsemi is a CMOS multiplexer with 8 channels. It operates at temperatures from -55 to 125 °C and has a max supply voltage of 6 V. With a max on-state resistance of 37 ohm, it is ideal for military-grade applications requiring fast switching times.
Median Price
$0.172
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.143
10k+ parts
$0.127
Digiode
$0.134
Chip Stock
Vyrian
South Electronics
Electronic Expediters
R&J Components
A2Z Electronics, Inc.
Sea View Technologies
Bristol Electronics
ACDS - Activité Composants Distribution Service
Corphita
Corohmni
$0.141
AZTECH Wire
$16.490
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Assy Fe
Microchip USA
Perfect Parts
UHIMA Technologies
Cyclops Electronics Ltd (Excess)
This material is durable and lightweight, making the product suitable for various applications while ensuring longevity.
The surface mount capability allows for easy installation and integration into electronic circuits.
The nominal supply voltage of 3V ensures compatibility with a wide range of electronic systems.
With 8 channels, this multiplexer offers versatile switching options for multiple input signals.
The high maximum operating temperature makes this product suitable for demanding industrial environments.
The low minimum operating temperature allows the product to function effectively in extremely cold conditions.
The CMOS technology ensures low power consumption and compatibility with modern electronic systems.
Multiplexers & Switches MC74LVX4051D attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Maximum Negative Supply Voltage (Vsup):
Minimum Negative Supply Voltage (Vsup):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Signal Current:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
MC74LVX4051D Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 03/Jan/2008
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
Samsung
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Itt Semiconductor
National Semiconductor
ABS07-32.768KHZ-T
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
ADG5436BRUZ-REEL7
Analog Devices
ADG5436BRUZ-REEL7 by Analog Devices is a CMOS SPDT switch with 2 functions, 16 terminals, and 11 ohm on-state resistance. It operates at -40 to 125 °C and supports supply voltages of +-9/+-22/9/40 V. Ideal for automotive applications due to its small outline package and separate output feature.
5962-89710013X
Defense Logistics Agency
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 28; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
TS3USB221ARSERG4
Texas Instruments
TS3USB221ARSERG4 by Texas Instruments is a 10-terminal chip carrier switch with 2.5V nominal voltage, -40 to 85°C operating temperature range, and 0.6mm max seated height. Ideal for industrial applications requiring a differential multiplexer with 900kHz bandwidth, it features separate outputs, low on-state resistance of 6 ohm, and fast switching times of 50ns on and 23ns off.
DG413DYZ-T
Renesas Electronics
Renesas Electronics' DG413DYZ-T is a CMOS SPST switch with 4 functions, 16 terminals, and 35 ohm on-state resistance. It operates b/w -40 to 85 °C and has a max supply voltage of 20 V. Ideal for industrial applications requiring high isolation and fast switching times.
TPS2116DRLR
TPS2116DRLR by Texas Instruments is a dual-channel single-ended multiplexer with a max on-state resistance of 0.04 ohm and common output. It operates b/w -40 to 125°C, making it suitable for automotive applications. This small outline switch has a terminal pitch of 0.5mm and can handle supply voltages from 1.6V to 5.5V efficiently.
DG408DY+
Analog Devices' DG408DY+ is a CMOS multiplexer with 8 channels, 100 ohm max on-state resistance, and 225 ns switch-on time. Ideal for industrial applications requiring a small outline package, -40 to 85°C operating range, and break-before-make switching.
74HC4051PW,118
NXP Semiconductors' 74HC4051PW,118 is a CMOS single-ended multiplexer with 8 channels. It operates at a supply voltage range of 2-10V and offers a max on-state resistance of 180 ohm. With a compact design and automotive temperature grade, it is ideal for applications requiring precise signal switching in tight spaces.
MAX333ACPP
Maxim Integrated
MAX333ACPP by Maxim Integrated is a 4-function multiplexer with 20 terminals, operating at -40 to +85°C. It features a nominal voltage of ±15V, on-state resistance of 45Ω, and break-before-make switching. Ideal for applications requiring high-speed signal routing in industrial settings.
FSA4157P6
FSA4157P6 by Onsemi is a SPDT switch with 1.15 ohm Ron, 65 ns switch-on time, and 70 dB off-state isolation. It operates at -40 to 85 °C for industrial applications requiring a compact 0.65 mm terminal pitch multiplexer in a small outline package.
CD74HCT4067M
CD74HCT4067M by Texas Instruments is a 24-terminal CMOS multiplexer with a 5V supply voltage, offering separate outputs and a max on-state resistance of 270 ohms. With a bandwidth of 89 kHz, it is ideal for military-grade applications requiring high-speed signal switching in compact designs.
74HC4051PW-Q100,118
Nexperia
Nexperia 74HC4051PW-Q100,118 is an AEC-Q100 compliant CMOS differential multiplexer with 8 channels. It operates b/w -40 to 125 °C and has a max on-state resistance of 180 ohm. With a small outline package style, it is ideal for automotive applications requiring high off-state isolation and fast switching times.
DG406DYZ-T
Intersil
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG442DY+
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AD8170ARZ
AD8170ARZ by Analog Devices is a video multiplexer with 2 channels, operating at ±5V supplies. It features a small outline package, dual terminal position, and 17ns switch-on time. Ideal for industrial applications requiring fast signal switching in a compact form factor.
NC7SZ66M5X
The Onsemi NC7SZ66M5X is a CMOS SPST switch with 1.8V nominal voltage and 60 ohm max on-state resistance. Ideal for industrial applications, it offers 50dB off-state isolation and operates b/w -40 to 85°C. With a small outline package and dual terminals, it suits compact designs requiring fast switching speeds.
CD74HC4052PWRE4
CD74HC4052PWRE4 by Texas Instruments is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125 °C and has a max on-state resistance of 130 ohm. With a package style of small outline, thin profile, and shrink pitch, it is suitable for military-grade applications requiring precise signal switching.
7705201EA
Harris Semiconductor
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DG212CJ
Temic Semiconductors
SPST; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Negative Supply Voltage (Vsup): -15 V;
TPS2064CDGNR-2
TPS2064CDGNR-2 by Texas Instruments is a small outline switch with separate output, operating from -40 to 125°C. It features SPST type, GULL WING terminals, and MAKE-BEFORE-BREAK switching suitable for industrial applications requiring low supply current.
CD74HC4051NSR
CD74HC4051NSR by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals, operating voltage range of 2-6V. It features a max on-state resistance of 270 ohm and bandwidth of 200 kHz. Ideal for military-grade applications requiring high-speed signal switching in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC74HC4066ADG
MC74HC4066ADG by Onsemi is a CMOS SPST switch with 4 functions, 120 ohm Ron, and 45 ns switch-on time. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for applications requiring fast switching and low on-state resistance in compact designs.
MC74HC4852ADTR2G
MC74HC4852ADTR2G by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at -55 to 125 °C, with Vsup ranging from 2-6V. With a max on-state resistance of 1300 ohm and switching type as break-before-make, it's ideal for military-grade applications requiring precise signal routing.
MC74HC4052ADWR2G
MC74HC4052ADWR2G by Onsemi is a CMOS multiplexer with 4 channels, 170 ohm Ron, and 83 ns switch-on time. It operates at -55 to 125 °C and has a MILITARY temperature grade. Ideal for signal routing in high-performance electronic systems.
MC74HC4051AN
Motorola
MC74HC4051AN by Onsemi is a CMOS multiplexer with 8 channels. It operates at a nominal voltage of 4.5V and has a max on-state resistance of 170 ohm. This multiplexer is commonly used in applications requiring signal switching and isolation.
MC74HC4052ADG
Rochester Electronics
DIFFERENTIAL MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4051ADTR2G
MC74HC4051ADTR2G by Onsemi is a single-ended multiplexer with 8 channels. It operates at a nominal voltage of 4.5V and has a max on-state resistance of 170 ohm. This IC is commonly used in applications requiring signal switching and multiplexing.
MC74HC4053ADTR2G
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4066ADR2G
SPST; Temperature Grade: MILITARY; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4051ADR2G
MC74HC4051ADR2G by Onsemi is a CMOS multiplexer with 8 channels. It operates at -55 to 125 °C and has a max on-state resistance of 170 ohm. With a package size of 9.9mm x 3.9mm, it's ideal for military-grade applications requiring precise signal switching in compact spaces.
MC74HC4053ADR2G
MC74HC4053ADR2G by Onsemi is a CMOS multiplexer with 3 functions, 16 terminals, and 80 ohm on-state resistance. It operates b/w -55 to 125 °C and has a peak reflow temp of 260 C. Ideal for military-grade applications requiring signal switching with low power consumption.
MC74HC4053ADWR2G
MC74HC4053ADWR2G by Onsemi is a CMOS multiplexer with 3 functions, 16 terminals, and 80 ohm on-state resistance. It operates b/w -55 to 125 °C and is ideal for military-grade applications requiring small outline packages and low power consumption.
MC74VHC1G66DTT1G
SPST; Temperature Grade: MILITARY; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC74HC4052DWR2
MC74HC4052DWR2 by Onsemi is a CMOS differential multiplexer with 4 channels. It operates at temperatures from -55 to 125°C, with a max on-state resistance of 170 ohm and switching type as break-before-make. This small outline IC is ideal for military-grade applications requiring fast switching times and low signal current consumption.
MC74HC4053ADG
MC74HC4052ADR2G
MC74HC4052ADR2G by Onsemi is a CMOS dual-terminal multiplexer with 4 channels. It operates b/w -55 to 125 °C, with a max supply voltage of 6V and on-state resistance of 170 ohm. Ideal for military-grade applications requiring small outline packages and low power consumption.
MC74VHC4051DTR2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved