Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC33178DG by Onsemi is a dual operational amplifier with a max input offset voltage of 4000 uV and a min slew rate of 1.2 V/us. It is commonly used in industrial applications that require low power consumption and high voltage gain.
Median Price
$0.340
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$0.330
1k+ parts
10k+ parts
-
Digiode
$0.323
Nova Conductors
$0.804
Galco
$1.140
Chip Stock
Vyrian
ABC Electronics Ltd.
LIBRA Elektronik GmbH
Cyclops Electronics Ltd
Component Sense
$0.676
ComSIT Distribution GmbH
Extreme Components
Resion
Sea View Technologies
Bristol Electronics
ACDS - Activité Composants Distribution Service
LittleDiode
Semicontronic
$0.289
$0.282
$0.280
Corphita
$0.306
Corohmni
Ampacity Inc.
$0.630
Argo Parts USA
$0.639
$0.620
Continental Prestige Electronics
$0.626
Advanced Electronics
$0.652
Aztec Data Supply Inc.
$1.922
AZTECH Wire
$16.410
Component Stockers USA
$99.990
Kepictronics
Perfect Parts
Problanco Electronics
A-Z Elektronik GmbH
SupplyDigital Components
TANS Electronics
Kulean Microsystems
UHIMA Technologies
Speed Components Ltd (Excess)
Microchip USA
Cyclops Electronics Ltd (Excess)
The plastic/epoxy package body material makes this operational amplifier lightweight and durable, ensuring reliable performance in various applications.
With a maximum input offset voltage of 4000 uV, this operational amplifier provides precise and accurate signal amplification, resulting in superior performance.
The low maximum average bias current of 0.6 uA ensures minimal power consumption, making this operational amplifier energy-efficient and suitable for battery-operated devices.
With surface mount capability, this operational amplifier can be easily integrated into surface mount technology (SMT) assembly processes, enabling efficient and space-saving PCB designs.
This operational amplifier offers two functions, enhancing versatility and flexibility in circuit designs by providing multiple operational amplifier capabilities in a single package.
The rectangular package shape maximizes compatibility with standard PCB layouts, facilitating easy integration into a wide range of electronic systems.
With a high nominal common mode reject ratio of 110 dB, this operational amplifier effectively rejects unwanted common mode signals, ensuring exceptional signal fidelity and clarity.
The nominal supply voltage of 15 V provides a stable power source for the operational amplifier, enabling consistent and reliable operation in various voltage environments.
With power supply options of ±2.5 V and ±15 V, this operational amplifier offers flexibility for different power requirements, making it adaptable to a wide range of applications.
This operational amplifier features eight terminals, allowing for easy connectivity and integration into electronic circuits.
The small outline package style of this operational amplifier enables compact circuit designs and provides space-saving solutions in electronic systems.
With a minimum slew rate of 1.2 V/µs, this operational amplifier delivers fast and efficient signal response, ensuring accurate amplification of dynamic signals.
The maximum supply voltage limit of 18 V ensures protection against excessive voltage levels, safeguarding the operational amplifier from potential damage.
With a maximum operating temperature of 85°C, this operational amplifier can withstand high-temperature environments, making it suitable for industrial applications.
The low maximum bias current of 0.5 uA at 25°C ensures minimal energy consumption and reduces the impact of thermal effects, resulting in stable and accurate amplifier performance.
This operational amplifier is equipped with frequency compensation, which improves stability and prevents oscillations, ensuring reliable amplifier operation in various applications.
With a minimum voltage gain of 25000, this operational amplifier provides substantial amplification capability, enabling effective signal amplification in low voltage scenarios.
Operating reliably even in extreme temperatures, with a minimum operating temperature of -40°C, this operational amplifier is suitable for use in a wide range of environments.
The terminal finish of tin (Sn) ensures good solderability and protects against corrosion, enhancing the durability and longevity of the operational amplifier.
Featuring dual terminal positions, this operational amplifier offers versatile mounting options, accommodating different PCB layouts and assembly requirements.
With a maximum seated height of 1.75 mm, this operational amplifier is compact and suitable for applications where space is limited.
The narrow width of 3.9 mm allows for efficient utilization of PCB space, enabling compact and optimized circuit designs.
This operational amplifier operates in micropower mode, consuming minimal power while delivering reliable amplification, making it ideal for low-power applications.
With a maximum time of 40 seconds at peak reflow temperature, this operational amplifier can withstand solder reflow processes during assembly, ensuring robust PCB assembly.
With a peak reflow temperature of 260°C, this operational amplifier can endure high-temperature solder reflow processes, ensuring proper solder joint formation during assembly.
The compact length of 4.9 mm allows for space-efficient integration of this operational amplifier into electronic circuits, enabling compact designs and saving PCB space.
Designed for industrial applications, this operational amplifier is capable of operating reliably in harsh temperature conditions, making it suitable for demanding environments.
The maximum negative supply voltage limit of -18 V ensures protection against excessive negative voltage levels, safeguarding the operational amplifier from potential damage.
With a nominal unity gain bandwidth of 5000 kHz, this operational amplifier provides optimal bandwidth for amplifying high-frequency signals, ensuring accurate and faithful signal reproduction.
Built using bipolar technology, this operational amplifier offers excellent linearity and low distortion, ensuring high-quality amplification in various applications.
Featuring a gull wing terminal form, this operational amplifier offers reliable electrical contact and ease of soldering, enabling efficient PCB assembly.
As an operational amplifier, this product is specifically designed for amplifying signals in electronic circuits, providing precise and reliable signal amplification.
With a maximum supply current of 1.6 mA, this operational amplifier ensures efficient power utilization, making it suitable for low-power or battery-operated applications.
The nominal negative supply voltage of -15 V provides a stable and balanced power source for the operational amplifier, enabling consistent and reliable operation in various voltage environments.
With a voltage-feedback architecture, this operational amplifier offers excellent linearity, low distortion, and high stability, ensuring accurate and faithful signal amplification.
Packaged in a rail style, this operational amplifier ensures secure and organized storage, handling, and transportation during manufacturing and distribution processes.
With a nominal slew rate of 2 V/µs, this operational amplifier provides fast and efficient signal response, ensuring accurate amplification of dynamic signals.
The terminal pitch of 1.27 mm allows for easy and precise soldering and integration of this operational amplifier into electronic circuits, facilitating efficient PCB assembly.
With a moisture sensitivity level of 1, this operational amplifier has high resistance to moisture and is suitable for a wide range of manufacturing and storage conditions.
Operational Amplifiers (Op Amps) MC33178DG attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Onsemi
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Minimum Slew Rate:
Nominal Slew Rate:
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
MC33178DG Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 18/Oct/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
EU2B-YS3103F
Idec
ROTARY SWITCH;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Comchip Technology
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
B340A-13-F
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
OPA551UA/2K5E4
OPA551UA/2K5E4 by Texas Instruments is an Operational Amplifier with a max input offset voltage of 5000uV and nominal common mode reject ratio of 102dB. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a unity gain bandwidth of 3000kHz, this Op Amp is ideal for high-performance audio and signal processing systems.
OPA2277PA
OPA2277PA by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
OPA2197IDR
OPA2197IDR by Texas Instruments is a dual operational amplifier with 500uV max input offset voltage and 126dB nominal CMRR. Ideal for automotive applications, it operates b/w -40 to 125°C, has a unity gain bandwidth of 10kHz, and consumes up to 2.6mA supply current.
LM6132BIM/NOPB
LM6132BIM/NOPB by Texas Instruments is a dual operational amplifier with 8000uV max input offset voltage, 107dB nominal CMRR, and 10000kHz unity gain bandwidth. Ideal for industrial applications requiring low bias current and high slew rate in a compact package.
OPA2192IDGKT
OPA2192IDGKT by Texas Instruments is a dual operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 250uV, nominal unity gain bandwidth of 10MHz, and operates in automotive temperature grades. Ideal for precision signal conditioning applications requiring high common mode rejection ratio and low bias current.
LM741CH
LM741CH by Texas Instruments is an Operational Amplifier with 6000uV Max Input Offset Voltage, 90dB Nominal CMRR, and 437kHz Unity Gain Bandwidth. Ideal for applications requiring precise signal amplification in commercial-grade environments at temperatures ranging from 0 to 70°C.
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
INA117KU/2K5G4
INA117KU/2K5G4 by Texas Instruments is an Op Amp with 1000uV Max Input Offset Voltage, 75dB CMRR, and 2V/us Min Slew Rate. Ideal for industrial applications due to -40 to 85°C operating temp range, ±15V power supplies, and small outline package style.
LM7321MF
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
OPA2237EA
OPA2237EA by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It operates at a wide temperature range of -40 to 85 °C, with a max supply voltage of +-18 V. Ideal for industrial applications requiring high voltage gain and frequency compensation in a compact package.
OPA2227UAE4
OPA2227UAE4 by Texas Instruments is a dual operational amplifier with low-offset and high common mode rejection ratio. It operates at a supply voltage of +-15V, has a unity gain bandwidth of 8MHz, and features a max input offset voltage of 200uV. Ideal for industrial applications requiring precise signal amplification in compact designs.
OP07CP
Maxim Integrated
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2227U/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM2902N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
LM6172IMX/NOPB
NCS20072DR2G
NCS20072DR2G by Onsemi is a dual operational amplifier with 4000uV max input offset voltage, 125dB CMRR, and 3200kHz unity gain bandwidth. Ideal for automotive applications due to its small outline package, low bias current of 0.0015uA, and wide operating temperature range from -40 to 125°C.
MCP6001T-I/OTG
Microchip Technology
MCP6001T-I/OTG by Microchip Technology is a CMOS Operational Amplifier with 5 terminals, Vsup of 5V, and low power consumption at 0.17mA. It has a unity gain bandwidth of 1000 kHz, making it suitable for industrial applications requiring precise voltage feedback amplification in compact designs. The op amp operates within a wide temperature range from -40 to 85 °C and offers high common mode rejection ratio of up to 76 dB.
LM2902MX/NOPB
LM2902MX/NOPB by Texas Instruments is a voltage-feedback operational amplifier with 4 functions. It has a max input offset voltage of 10000 uV and a nominal common mode reject ratio of 70 dB. This amplifier is commonly used in industrial applications due to its wide temperature range and low power consumption.
TL072ID
TL072ID by Texas Instruments is a dual operational amplifier with low-bias and frequency compensation. It offers a max input offset voltage of 8000 uV, min slew rate of 8 V/us, and nominal unity gain bandwidth of 3000 kHz. Ideal for industrial applications requiring precise signal amplification in compact designs.
LM324NE3
LM324NE3 by Texas Instruments is a quad operational amplifier with 4 functions. It features a max input offset voltage of 9000 uV and a nominal voltage of 5 V. Ideal for applications requiring low-bias current, it operates at temperatures ranging from 0 to 70 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC33202DR2G
MC33202DR2G by Onsemi is a dual operational amplifier with 11000 uV max input offset voltage and 90 dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 105 °C with a supply voltage of 5V. With a compact rectangular package style, it features low bias current and high slew rate for precision signal processing.
MC33078DR2G
MC33078DR2G by Onsemi is a dual operational amplifier with 3000uV max input offset voltage and 100dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 85°C, has a unity gain bandwidth of 16MHz, and consumes up to 5.5mA supply current.
MC33072DR2G
MC33072DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage, 97dB CMRR, and 8V/us min slew rate. Ideal for industrial applications requiring precise signal amplification in a compact package. Operates at -40 to 85°C with ±15V supplies and 5.6mA max supply current.
MC33079DR2G
MC33079DR2G by Onsemi is a 4-function Op Amp with max input offset voltage of 3500uV, min slew rate of 5V/us, and unity gain bandwidth of 9000kHz. Ideal for industrial applications requiring precise signal amplification in a compact package.
MC33072ADR2G
MC33072ADR2G by Onsemi is a dual operational amplifier with a max input offset voltage of 5000 uV. It has a nominal common mode reject ratio of 97 dB and a min slew rate of 8 V/us. This op amp is commonly used in industrial applications requiring high voltage gain and temperature stability.
MC33172DR2G
MC33172DR2G by Onsemi is a dual operational amplifier with 6500uV max input offset voltage and 1.6V/us min slew rate. Ideal for industrial applications, it operates at -40 to 85 °C with +/-15V power supplies and offers high voltage gain of 25000.
MC33079DT
MC33079DT by STMicroelectronics is a 4-function operational amplifier with max input offset voltage of 3500uV and min slew rate of 5V/us. Widely used in industrial applications, it operates at temperatures ranging from -40 to 105°C, making it suitable for various voltage-feedback amplifier circuits.
MC33178DR2G
MC33178DR2G by Onsemi is a dual operational amplifier with 4000uV max input offset voltage, 110dB CMRR, and 1.2V/us min slew rate. Ideal for industrial applications requiring low power consumption and high precision signal amplification in compact designs.
MC33179DR2G
MC33179DR2G by Onsemi is a quad operational amplifier with 4 functions. It features a max input offset voltage of 4000 uV, min slew rate of 1.2 V/us, and nominal common mode reject ratio of 110 dB. Ideal for industrial applications requiring micropower amplification in a small outline package.
MC33272ADR2G
MC33272ADR2G by Onsemi is a dual operational amplifier with 1800uV max input offset voltage and 100dB nominal CMRR. It operates at -40 to 85 °C, has 8 terminals, and a unity gain bandwidth of 5500 kHz. Ideal for industrial applications requiring precise signal amplification in compact designs.
MC33274ADR2G
MC33274ADR2G by Onsemi is a quad operational amplifier with 4 functions. It offers a max input offset voltage of 1800 uV and a min slew rate of 8 V/us. Ideal for industrial applications, it operates at temperatures ranging from -40 to 85 °C and has a nominal unity gain bandwidth of 5500 kHz.
MC33079DG
MC33079DG by Onsemi is a 4-function Op Amp with max input offset voltage of 3500uV, min slew rate of 5V/us, and nominal CMRR of 100dB. Ideal for industrial applications requiring high precision amplification in a compact package.
MC33078D
Motorola
MC33079D
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
MC33079D by Texas Instruments is an Operational Amplifier with 4 functions, offering a max input offset voltage of 3000 uV and a min slew rate of 5 V/us. It operates at temperatures ranging from -40 to 85 °C and has a nominal unity gain bandwidth of 16000 kHz. Ideal for industrial applications requiring precise signal amplification in compact designs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved