Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC33079DG by Onsemi is a 4-function Op Amp with max input offset voltage of 3500uV, min slew rate of 5V/us, and nominal CMRR of 100dB. Ideal for industrial applications requiring high precision amplification in a compact package.
Median Price
$5.663
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$5.380
1k+ parts
10k+ parts
-
Nova Conductors
$1.000
Digiode
Chip Stock
Vyrian
ComSIT Distribution GmbH
Bristol Electronics
Flex Direct, LLC
Atlantic Semiconductor
GES GmbH
ACDS - Activité Composants Distribution Service
Speed Components Ltd
IBS Electronics
Q Components
EMSNET
Continental Prestige Electronics
$0.248
$0.243
Argo Parts USA
$0.241
Benley Electronics
$0.450
Netroflash
Aztec Data Supply Inc.
$1.772
Semicontronic
$4.810
$4.690
$4.666
Ampacity Inc.
Corphita
$5.097
Advanced Electronics
Corohmni
AZTECH Wire
$13.340
Kepictronics
Perfect Parts
Lixinc
Kulean Microsystems
Problanco Electronics
A-Z Elektronik GmbH
TANS Electronics
SupplyDigital Components
Microchip USA
UHIMA Technologies
GreenTree Electronics
The plastic/epoxy package body material ensures durability and reliability, making this operational amplifier a solid choice for long-term use.
With a low maximum input offset voltage, this op amp provides accurate output even with small input signals, making it ideal for precision applications.
The low maximum average bias current results in minimal power consumption, making this operational amplifier efficient and cost-effective.
The surface-mount capability allows for easy and secure PCB integration, saving time and effort in the assembly process.
With multiple functions in one device, this op amp can handle complex circuit requirements, offering flexibility and space-saving benefits.
The high nominal common mode reject ratio ensures accurate signal processing in noisy environments, making this op amp suitable for demanding applications.
The 15V nominal supply voltage provides sufficient power for various applications, making this op amp versatile and compatible with different systems.
With dual power supplies of +-15V, this op amp offers a wide operating range and voltage flexibility, making it suitable for various power configurations.
The 14 terminals allow for easy and secure connections, enabling quick and hassle-free integration into circuit designs.
The small outline package style saves space on the PCB, making this op amp suitable for compact electronic devices or applications with limited board space.
Operational Amplifiers (Op Amps) MC33079DG attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Onsemi
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Frequency Compensation:
Low-Offset:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Minimum Slew Rate:
Nominal Slew Rate:
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
MC33079DG Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 18/Oct/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
FT232RL-REEL
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
EU2B-YS3303C
Idec
ROTARY SWITCH;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA4277UAG4
Texas Instruments
OPA4277UAG4 by Texas Instruments is an operational amplifier with a max input offset voltage of 100uV, low bias current of 0.004uA, and high common mode rejection ratio of 140dB. Ideal for industrial applications requiring precise signal amplification in compact designs due to its small outline package and micropower technology.
AD8605ARTZ-R2
Analog Devices
AD8605ARTZ-R2 by Analog Devices is a low-offset operational amplifier with 750uV max input offset voltage, 90dB nominal CMRR, and 110000 min voltage gain. Ideal for automotive applications due to its low-bias current of 0.000001uA @25C and wide temperature range from -40 to 125 °C.
OPA2350EA/250
OPA2350EA/250 by Texas Instruments is an operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 500 uV, nominal unity gain bandwidth of 38 MHz, and operates in industrial temperature range. Ideal for precision applications requiring high common mode rejection ratio and low bias current.
OPA244NA/250
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR;
LM7321MF
LM7321MF by Texas Instruments is an Operational Amplifier with a Max Input Offset Voltage of 6000uV, Nominal Unity Gain Bandwidth of 16000kHz, and Nominal Voltage of 5V. It is used in automotive applications due to its small outline package style and wide operating temperature range from -40°C to 125°C.
LM324AD
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LMC6482AIM/NOPB
LMC6482AIM/NOPB by Texas Instruments is a dual operational amplifier with low-bias current of 0.000004 uA and micropower feature. It has a max input offset voltage of 750 uV, making it ideal for industrial applications requiring precise signal amplification in compact designs. The package style is small outline, suitable for surface mount assembly with dimensions of 4.9mm x 3.9mm x 1.75mm.
LM324AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
INA240A1D
The Texas Instruments INA240A1D is an operational amplifier with a max input offset voltage of 25uV and nominal voltage of 5V. With a unity gain bandwidth of 400kHz, it is ideal for applications requiring low-offset amplification in compact designs. Its small outline package and surface mount capability make it suitable for temperature-sensitive environments up to 125°C.
LM358MX/NOPB
LM358MX/NOPB by Texas Instruments is an Operational Amplifier with 2 functions, featuring a Max Input Offset Voltage of 9000 uV and Nominal Voltage of 5 V. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Nominal Unity Gain Bandwidth of 1000 kHz.
INA138NA/3KG4
INA138NA/3KG4 by Texas Instruments is a 5-terminal Op Amp with Vsup of 5V, offering high CMRR of 120 dB and low IIB of 10 uA. Ideal for automotive applications due to its compact size, low power consumption, and wide temperature range from -40 to 125 °C.
JM38510/11402BPA
Precision Monolithics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
OP07CP
LM741CH
LM741CH by Texas Instruments is an Operational Amplifier with 6000uV Max Input Offset Voltage, 90dB Nominal CMRR, and 437kHz Unity Gain Bandwidth. Ideal for applications requiring precise signal amplification in commercial-grade environments at temperatures ranging from 0 to 70°C.
LM2902D
LM2902D by Texas Instruments is a quad operational amplifier with 4 functions. It has a max input offset voltage of 10000 uV and micropower feature. Widely used in automotive applications due to its low-bias, high common mode rejection ratio, and small outline package style.
LM324D-T
Philips Semiconductors
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM358AM
LM358AM by Texas Instruments is a dual operational amplifier with a max input offset voltage of 5000 uV and a max average bias current of 0.2 uA. It is commonly used in applications such as audio amplifiers, signal conditioning, and voltage followers.
LM258DR2G
LM258DR2G by Onsemi is a dual operational amplifier with 5000uV max input offset voltage and 85dB nominal CMRR. Ideal for applications requiring low bias current, it operates at -25 to 85 °C with a supply voltage of +-1.5/+-15/3/30V. The small outline package makes it suitable for compact designs in various electronic systems.
LM2902M
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC33202DR2G
MC33202DR2G by Onsemi is a dual operational amplifier with 11000 uV max input offset voltage and 90 dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 105 °C with a supply voltage of 5V. With a compact rectangular package style, it features low bias current and high slew rate for precision signal processing.
MC33078DR2G
MC33078DR2G by Onsemi is a dual operational amplifier with 3000uV max input offset voltage and 100dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 85°C, has a unity gain bandwidth of 16MHz, and consumes up to 5.5mA supply current.
MC33072DR2G
MC33072DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage, 97dB CMRR, and 8V/us min slew rate. Ideal for industrial applications requiring precise signal amplification in a compact package. Operates at -40 to 85°C with ±15V supplies and 5.6mA max supply current.
MC33079DR2G
MC33079DR2G by Onsemi is a 4-function Op Amp with max input offset voltage of 3500uV, min slew rate of 5V/us, and unity gain bandwidth of 9000kHz. Ideal for industrial applications requiring precise signal amplification in a compact package.
MC33072ADR2G
MC33072ADR2G by Onsemi is a dual operational amplifier with a max input offset voltage of 5000 uV. It has a nominal common mode reject ratio of 97 dB and a min slew rate of 8 V/us. This op amp is commonly used in industrial applications requiring high voltage gain and temperature stability.
MC33172DR2G
MC33172DR2G by Onsemi is a dual operational amplifier with 6500uV max input offset voltage and 1.6V/us min slew rate. Ideal for industrial applications, it operates at -40 to 85 °C with +/-15V power supplies and offers high voltage gain of 25000.
MC33079DT
STMicroelectronics
MC33079DT by STMicroelectronics is a 4-function operational amplifier with max input offset voltage of 3500uV and min slew rate of 5V/us. Widely used in industrial applications, it operates at temperatures ranging from -40 to 105°C, making it suitable for various voltage-feedback amplifier circuits.
MC33178DR2G
MC33178DR2G by Onsemi is a dual operational amplifier with 4000uV max input offset voltage, 110dB CMRR, and 1.2V/us min slew rate. Ideal for industrial applications requiring low power consumption and high precision signal amplification in compact designs.
MC33179DR2G
MC33179DR2G by Onsemi is a quad operational amplifier with 4 functions. It features a max input offset voltage of 4000 uV, min slew rate of 1.2 V/us, and nominal common mode reject ratio of 110 dB. Ideal for industrial applications requiring micropower amplification in a small outline package.
MC33272ADR2G
MC33272ADR2G by Onsemi is a dual operational amplifier with 1800uV max input offset voltage and 100dB nominal CMRR. It operates at -40 to 85 °C, has 8 terminals, and a unity gain bandwidth of 5500 kHz. Ideal for industrial applications requiring precise signal amplification in compact designs.
MC33274ADR2G
MC33274ADR2G by Onsemi is a quad operational amplifier with 4 functions. It offers a max input offset voltage of 1800 uV and a min slew rate of 8 V/us. Ideal for industrial applications, it operates at temperatures ranging from -40 to 85 °C and has a nominal unity gain bandwidth of 5500 kHz.
MC33078D
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Motorola
MC33079D
MC33079D by Texas Instruments is an Operational Amplifier with 4 functions, offering a max input offset voltage of 3000 uV and a min slew rate of 5 V/us. It operates at temperatures ranging from -40 to 85 °C and has a nominal unity gain bandwidth of 16000 kHz. Ideal for industrial applications requiring precise signal amplification in compact designs.
MC33274ADR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved