Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC33274ADR2G by Onsemi is a quad operational amplifier with 4 functions. It offers a max input offset voltage of 1800 uV and a min slew rate of 8 V/us. Ideal for industrial applications, it operates at temperatures ranging from -40 to 85 °C and has a nominal unity gain bandwidth of 5500 kHz.
Median Price
$0.724
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Arrow
1+ parts
$0.905
100+ parts
$0.504
1k+ parts
$0.445
10k+ parts
$0.390
Chip1Stop
$0.938
$0.491
$0.424
$0.392
Mouser Electronics
$0.980
$0.546
$0.450
-
Newark
$0.990
$0.564
$0.471
DigiKey
$1.010
$0.575
$0.501
Adafruit Industries
$3.413
$3.243
EBV Elektronik
Rochester
$0.556
$0.461
$0.411
Verical
$0.577
$0.514
Future Electronics
$0.355
Farnell
$0.456
$0.371
$0.314
Element14
$0.624
$0.574
RS (Exports)
$0.434
Master Electronics
$0.543
$0.363
$0.346
Digiode
Maritex
$0.772
$0.406
$0.312
TME
$0.910
$0.561
$0.523
Nova Conductors
$1.000
IBS Electronics
$0.656
$0.594
Chip Stock
Vyrian
NAC Semi
$0.664
Sunrise Surplus Inc.
Mentor Electronics Marketing, LLC
ComSIT Distribution GmbH
ComSIT USA
Sensible Micro Corp
Bristol Electronics
LIBRA Elektronik GmbH
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Benley Electronics
$0.300
Ampacity Inc.
$0.317
Semicontronic
$0.309
$0.307
Corohmni
$0.362
Corphita
Component Stockers USA
$0.440
$0.410
$0.420
$0.370
Continental Prestige Electronics
$0.496
$0.486
Argo Parts USA
$0.481
Netroflash
$0.950
$0.930
Advanced Electronics
Aztec Data Supply Inc.
$4.092
Microchip USA
$7.085
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
RC Electronics
$0.530
$0.490
$0.470
Kepictronics
Lixinc
Futuretech Components
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
A-Z Elektronik GmbH
iodParts Technologies Inc.
TANS Electronics
UHIMA Technologies
The plastic/epoxy material used in the package body provides durability and protection for the internal components of the operational amplifier.
The low input offset voltage helps in minimizing errors in the output signal, making this operational amplifier suitable for precision applications.
The surface mount capability allows for easy and convenient installation on circuit boards, saving space and simplifying the assembly process.
The nominal supply voltage of 15V ensures stable and reliable operation of the operational amplifier within the specified voltage range.
Being an operational amplifier, this product is designed for high gain and differential signal amplification applications, providing versatility in various electronic circuits.
The high unity gain bandwidth ensures excellent frequency response and fast signal processing capabilities, making this operational amplifier suitable for high-speed applications.
Operational Amplifiers (Op Amps) MC33274ADR2G attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from Onsemi
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Frequency Compensation:
Low-Offset:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Minimum Slew Rate:
Nominal Slew Rate:
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
MC33274ADR2G Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Assembly/Origin - Assembly 14/Mar/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New England Semiconductor
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Eic Semiconductor
Panjit International
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Changzhou Galaxy Century Microelectronics
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2340EA-250
Burr-Brown Corporation
OPA2340EA-250 by Burr-Brown is a dual operational amplifier with 500uV max input offset voltage and 84dB nominal CMRR. It operates in industrial temperature range (-40 to 85 °C) and has a unity gain bandwidth of 5500 kHz. Ideal for precision applications requiring low bias current and high CMRR.
LM6172IM/NOPB
LM6172IM/NOPB by Texas Instruments is an Operational Amplifier with a max input offset voltage of 1500uV, 110dB nominal common mode reject ratio, and 62MHz nominal bandwidth. Ideal for industrial applications requiring high precision amplification in a compact package with surface mount capability.
OPA132UA/2K5
OPA132UA/2K5 by Texas Instruments is an Operational Amplifier with a Max Input Offset Voltage of 500uV, Nominal Voltage of +-15V, and Nominal Unity Gain Bandwidth of 8000kHz. Ideal for automotive applications due to its low-bias design, high Common Mode Reject Ratio, and compact SMALL OUTLINE package style.
OP297GSZ-REEL
Analog Devices
The Analog Devices OP297GSZ-REEL is a dual operational amplifier with low-offset and low-bias features. It operates on a nominal voltage of +-15V, has a max input offset voltage of 400uV, and offers a min slew rate of 0.05V/us. Ideal for industrial applications requiring precise signal amplification in compact spaces due to its small outline package style.
LM324MX/NOPB
LM324MX/NOPB by Texas Instruments is a quad operational amplifier with 14 terminals. It features a max input offset voltage of 7000 uV and a nominal common mode reject ratio of 85 dB. This Op Amp is commonly used in applications requiring micropower amplification with a min voltage gain of 15000, making it ideal for low-power circuits in commercial temperature environments.
INA260AIPWR
Texas Instruments' INA260AIPWR is an operational amplifier with a 3.3V supply voltage, 5uV input offset voltage, and 36V common mode voltage. Ideal for automotive applications, it offers a unity gain bandwidth of 3.5 kHz and a min CMRR of 126 dB in a compact rectangular package with dual terminals and nickel palladium gold finish.
OPA376AIDBVTG4
OPA376AIDBVTG4 by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 25 uV, nominal unity gain bandwidth of 5500 kHz, and operates in automotive-grade temperatures. Ideal for applications requiring high precision and low power consumption in compact designs.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM324AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
OPA2227U
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
OPA4277UAE4
OPA4277UAE4 by Texas Instruments is an operational amplifier with a max input offset voltage of 100uV, low bias current of 0.004uA, and high common mode rejection ratio of 140dB. Ideal for industrial applications requiring precision amplification in a compact package with micropower consumption.
INA193AIDBVTG4
Texas Instruments' INA193AIDBVTG4 is a 5-terminal operational amplifier in a small outline, low profile package. With nickel palladium gold finish and gull wing terminal form, it has automotive temperature grade suitability. Its compact dimensions of 2.9mm length, 1.6mm width, and 1.45mm seated height make it ideal for space-constrained applications in automotive electronics.
JM38510/13501BPA
JM38510/13501BPA by Analog Devices is an Operational Amplifier with 60uV Max Input Offset Voltage, 106dB CMRR, and 600kHz Unity Gain Bandwidth. Ideal for military applications due to its MIL-TEMP rating, it operates b/w -55°C to 125°C with a supply voltage of ±15V.
AD8615AUJZ-R2
AD8615AUJZ-R2 by Analog Devices is a CMOS Operational Amplifier with low-offset (0.8 uV) and low-bias (0.00055 uA). Ideal for automotive applications, it offers a wide temperature range (-40 to 125 °C) and high common mode rejection ratio (100 dB). With compact dimensions (2.9mm x 1.6mm x 1mm), it features voltage-feedback architecture and unity gain bandwidth of 24 kHz.
OPA4277UA
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
LM741CN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO;
LM224DR2G
LM224DR2G by Onsemi is a quad operational amplifier with 4 functions, featuring a max input offset voltage of 5000 uV and a nominal common mode reject ratio of 85 dB. With a supply voltage range of 5-30 V, it is ideal for applications requiring high voltage gain and low bias current in small outline packages.
1426
Teledyne Technologies
OPERATIONAL AMPLIFIER; Temperature Grade: OTHER; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; No. of Functions: 1;
TL084IDT
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC33202DR2G
MC33202DR2G by Onsemi is a dual operational amplifier with 11000 uV max input offset voltage and 90 dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 105 °C with a supply voltage of 5V. With a compact rectangular package style, it features low bias current and high slew rate for precision signal processing.
MC33078DR2G
MC33078DR2G by Onsemi is a dual operational amplifier with 3000uV max input offset voltage and 100dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 85°C, has a unity gain bandwidth of 16MHz, and consumes up to 5.5mA supply current.
MC33072DR2G
MC33072DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage, 97dB CMRR, and 8V/us min slew rate. Ideal for industrial applications requiring precise signal amplification in a compact package. Operates at -40 to 85°C with ±15V supplies and 5.6mA max supply current.
MC33079DR2G
MC33079DR2G by Onsemi is a 4-function Op Amp with max input offset voltage of 3500uV, min slew rate of 5V/us, and unity gain bandwidth of 9000kHz. Ideal for industrial applications requiring precise signal amplification in a compact package.
MC33072ADR2G
MC33072ADR2G by Onsemi is a dual operational amplifier with a max input offset voltage of 5000 uV. It has a nominal common mode reject ratio of 97 dB and a min slew rate of 8 V/us. This op amp is commonly used in industrial applications requiring high voltage gain and temperature stability.
MC33172DR2G
MC33172DR2G by Onsemi is a dual operational amplifier with 6500uV max input offset voltage and 1.6V/us min slew rate. Ideal for industrial applications, it operates at -40 to 85 °C with +/-15V power supplies and offers high voltage gain of 25000.
MC33079DT
MC33079DT by STMicroelectronics is a 4-function operational amplifier with max input offset voltage of 3500uV and min slew rate of 5V/us. Widely used in industrial applications, it operates at temperatures ranging from -40 to 105°C, making it suitable for various voltage-feedback amplifier circuits.
MC33178DR2G
MC33178DR2G by Onsemi is a dual operational amplifier with 4000uV max input offset voltage, 110dB CMRR, and 1.2V/us min slew rate. Ideal for industrial applications requiring low power consumption and high precision signal amplification in compact designs.
MC33179DR2G
MC33179DR2G by Onsemi is a quad operational amplifier with 4 functions. It features a max input offset voltage of 4000 uV, min slew rate of 1.2 V/us, and nominal common mode reject ratio of 110 dB. Ideal for industrial applications requiring micropower amplification in a small outline package.
MC33272ADR2G
MC33272ADR2G by Onsemi is a dual operational amplifier with 1800uV max input offset voltage and 100dB nominal CMRR. It operates at -40 to 85 °C, has 8 terminals, and a unity gain bandwidth of 5500 kHz. Ideal for industrial applications requiring precise signal amplification in compact designs.
MC33079DG
MC33079DG by Onsemi is a 4-function Op Amp with max input offset voltage of 3500uV, min slew rate of 5V/us, and nominal CMRR of 100dB. Ideal for industrial applications requiring high precision amplification in a compact package.
MC33078D
Motorola
MC33079D
MC33079D by Texas Instruments is an Operational Amplifier with 4 functions, offering a max input offset voltage of 3000 uV and a min slew rate of 5 V/us. It operates at temperatures ranging from -40 to 85 °C and has a nominal unity gain bandwidth of 16000 kHz. Ideal for industrial applications requiring precise signal amplification in compact designs.
MC33274ADR2
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved