Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV8548M by Onsemi is a Motion Control IC with 12V supply voltage. It features BICMOS technology, 10 terminals, and operates b/w -30 to 85 °C. Ideal for applications requiring precise motion control in compact designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
SupplyDigital Components
TANS Electronics
Corphita
Kulean Microsystems
Problanco Electronics
UHIMA Technologies
Corohmni
Perfect Parts
PLASTIC/EPOXY material ensures durability and reliability, making this product suitable for a wide range of applications.
Surface mount capability allows for easy integration onto circuit boards, simplifying the installation process.
Operating at a nominal supply voltage of 12V makes this product compatible with many standard power sources.
With a high maximum operating temperature of 85 °C, this product can perform reliably even in demanding environments.
Utilizing BICMOS technology offers a good balance between performance and power consumption, making this product efficient for motion control applications.
Motion Control ICs LV8548M attributes and parameters. Explore more Motion Control ICs devices from Onsemi
JESD-30 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
LV8548M Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358M
Raytheon Semiconductor
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
Microsemi
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
TDA1085A
Baneasa S A
UNIVERSAL MOTOR CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
DRV8436PPWPR
Texas Instruments
DRV8436PPWPR by Texas Instruments is a motion control IC with a supply voltage range of 4.5V to 48V. It features a small outline package style and is suitable for automotive applications. This IC is designed for brush DC motor control with a temperature range of -40°C to 125°C.
A3959SLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A3959SLPTR-T is a Motion Control IC with 28 terminals, operating voltage of 5V, and max output current of 6A. Ideal for stepper motor control applications due to its small outline package and NMOS technology. Operating temperature ranges from -20°C to 85°C.
A3906SESTR-T
Allegro MicroSystems' A3906SESTR-T is a Motion Control IC with 20 terminals, operating voltage of 2.5-9V, and max output current of 1.5A. Ideal for stepper motor control applications due to its compact chip carrier package and CMOS technology, suitable for temperatures ranging from -20 to 85°C.
LM628N-8/NOPB
National Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
STK672-432AN-E
STK672-432AN-E by Onsemi is a Motion Control IC with 19 terminals, 5V nominal voltage, and 10A max output current. It is a stepper motor controller in rectangular package style for applications requiring precise motion control.
TLE7181EMXUMA1
Infineon Technologies
TLE7181EMXUMA1 by Infineon is a Motion Control IC with 24 terminals, operating voltage range of 5.5V to 45V. It's designed for brush DC motor control applications, featuring a small outline package with low profile and gull wing terminal form.
A3979SLPTR-T
Allegro MicroSystems' A3979SLPTR-T is a Motion Control IC with 28 terminals, operating voltage of 3-5.5V, and max output current of 2.5A. Ideal for stepper motor control applications due to its compact size, NMOS technology, and peak reflow temp of 260°C.
DRV8703DQRHBRQ1
DRV8703DQRHBRQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating at -40 to 125°C. It supports supply voltage range of 5.5V to 45V and is ideal for automotive applications due to its compact size (5x5mm) and robust construction in PLASTIC/EPOXY package.
LB11600JV-TLM-E
LB11600JV-TLM-E by Onsemi is a Motion Control IC with 30 terminals, operating at -40 to 100 °C. It has a supply voltage range of 4.5-14 V and output current of 0.04 A. Ideal for industrial applications requiring brushless DC motor control in compact spaces.
E-L6219DS013TR
STMicroelectronics
STMicroelectronics E-L6219DS013TR is a Motion Control IC with 24 terminals, operating voltage of 5V, and max output current of 1A. Ideal for stepper motor control applications due to its bipolar technology and compact small outline package design.
DRV8412DDWR
DRV8412DDWR by Texas Instruments is a Motion Control IC with 2 functions, operating at a supply voltage range of 12-50V. This IC is ideal for Stepper Motor Controllers, featuring a max output current of 15A and terminal finish of Ni/Pd/Au. With a compact package style and industrial temperature grade, it offers precise control in various applications.
L6480H
STMicroelectronics L6480H is a Motion Control IC with 38 terminals, operating at power supplies of 7.5V and 48V. It features a small outline package shape for stepper motor control applications, with surface mount capability and peak reflow temperature of 260°C.
DRV8323HRTAT
Texas Instruments' DRV8323HRTAT is a Motion Control IC with 24V nominal voltage. It features a max output current of 1A and operates in automotive-grade temperatures (-40 to 125°C). This Brushless DC Motor Controller has a compact chip carrier package suitable for surface mount applications.
DRV8231ADDAR
DRV8231ADDAR by Texas Instruments is a Motion Control IC with 8 terminals and a supply voltage range of 4.5V to 33V. It offers a max output current of 3.7A, suitable for brush DC motor control applications. With a small outline package style and low profile design, it operates in temperatures ranging from -40°C to 150°C.
LB1938FA-BH
LB1938FA-BH by Onsemi is a motion control IC with a supply voltage range of 2.2V to 10V and a max output current of 0.8A. It is commonly used as a brushless DC motor controller in various applications.
BD6220F-E2
ROHM
ROHM's BD6220F-E2 is a Motion Control IC with 12V supply voltage, 0.5A output current, and 8 terminals. Ideal for BRUSH DC MOTOR CONTROL applications in industrial settings. Features small outline package style, dual terminal position, and peak reflow temp of 260°C.
TMC261C-PA-T
Maxim Integrated
STEPPER MOTOR CONTROLLER; No. of Terminals: 44; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES; Additional Features: it also has 2k ESD wrt application handling;
PDRV8424PWPR
The Texas Instruments PDRV8424PWPR is a Motion Control IC with 28 terminals, operating at -40 to 125°C. It features a 5V nominal voltage and can handle up to 2.5A output current. Ideal for automotive applications, this stepper motor controller comes in a small outline package with gull wing terminals.
L6235QTR
L6235QTR by STMicroelectronics is a Motion Control IC with 48V nominal voltage, suitable for automotive applications. It features a square package shape, BCDMOS technology, and supports brushless DC motor control. With a max operating temperature of 150°C and surface mount capability, it offers high performance in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV8548MC-AH
LV8548MC-AH by Onsemi is a Motion Control IC with 12V supply voltage, suitable for stepper motor control. It features a small outline package, dual terminal position, and BICMOS technology. With a wide operating temperature range (-30 to 85 °C), it is ideal for applications requiring precise motion control in various environments.
LV8548M-TLM-H
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8549MC-AH
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8549M-TLM-H
LV8548MC
LV8548MC-BH
LV8548MCZ-AH
LV8549M
LV8549MC
LV8549MC-BH
Sanyo Electric
Sanyo Semiconductor
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV8548M
STEPPER MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved