Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LV5069JA-ZH by Onsemi is a 16-terminal switching regulator with max. operating temp of 85 °C and min. operating temp of -40°C. It features current-mode control, BICMOS technology, and max. switching frequency of 380 kHz. Ideal for industrial applications requiring high-performance temperature regulation in a compact package.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
Problanco Electronics
TANS Electronics
Corphita
Corohmni
SupplyDigital Components
UHIMA Technologies
Microchip USA
PLASTIC/EPOXY material provides durability and protection for the internal components of the switching regulator, ensuring reliable performance over time.
Being surface mountable makes the product easy to integrate into a compact circuit board design, saving space and allowing for efficient layout.
Having 16 terminals enables the switching regulator to connect to various external components and devices, increasing versatility in different applications.
With a high maximum operating temperature, this switching regulator can withstand demanding environments and deliver consistent performance under varying conditions.
The current-mode control mode provides precise regulation of the output current, resulting in stable and efficient power conversion for the connected load.
Utilizing BICMOS technology allows for a balance between the advantages of both bipolar and CMOS technologies, offering high speed and low power consumption for the switching regulator.
Switching Regulators & Controllers LV5069JA-ZH attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification:
Sub-Category:
Surface Mount:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
LV5069JA-ZH Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
STMicroelectronics
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
TPS54331DDA
TPS54331DDA by Texas Instruments is a switching regulator with a max output current of 3A and a control mode of current-mode. It operates in a temperature range from -40 to 150°C, making it suitable for automotive applications. With a compact package style and low profile design, it is ideal for space-constrained environments.
TPS62097RWKR
TPS62097RWKR by Texas Instruments is a switching regulator with 2A output current, 2500kHz max switching frequency, and 3.6V nominal input voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact chip carrier package style.
TPS54331DR
TPS54331DR by Texas Instruments is a switching regulator with 3A output current, 570kHz max frequency, and 150°C operating temp. Ideal for automotive applications due to its pulse width modulation control technique and buck switcher configuration.
LMR54406FDBVR
LMR54406FDBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125 °C. It has a max output voltage of 28 V and current of 0.6 A, suitable for applications requiring a compact design and efficient power management in various electronic devices.
LMR50410YFQDBVRQ1
LMR50410YFQDBVRQ1 by Texas Instruments is a switching regulator with 1A output current, 28V max output voltage, and 2100kHz max switching frequency. Ideal for automotive applications due to AEC-Q100 screening level and -40°C to 150°C operating temperature range.
LM2596S-12/NOPB
LM2596S-12/NOPB by Texas Instruments is a switching regulator with 5 terminals, operating b/w -40 to 125°C. It has a voltage output range of 3.3V to 37V and can handle up to 3A output current. Ideal for automotive applications due to its compact size and buck switcher configuration.
TL494IN
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MC34063ADG
MC34063ADG by Onsemi is a switching regulator with 8 terminals, operating b/w 0-70°C. It has a max output current of 1.5A and supports voltage-mode control technique at a frequency of up to 100 kHz. Ideal for applications requiring efficient power conversion in compact spaces.
TPS630701RNMT
TPS630701RNMT by Texas Instruments is a 15-terminal switching regulator with a max output current of 2A and a control mode of current-mode. It operates b/w -40 to 125°C, making it suitable for automotive applications requiring efficient power management in compact spaces.
LM2675M-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2842XMK-ADJL/NOPB
LM2842XMK-ADJL/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a control mode of current-mode PWM. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various applications such as power management in automotive electronics.
LM5007MM/NOPB
LM5007MM/NOPB by Texas Instruments is a switching regulator with a max output voltage of 73V and max output current of 0.5A. It operates in automotive-grade temperatures (-40 to 125°C) making it suitable for automotive applications. With a compact package style, small outline, and thin profile, it is ideal for space-constrained designs.
NCP6334BMTAATBG
NCP6334BMTAATBG by Onsemi is a VOLTAGE-MODE BUCK SWITCHING REGULATOR with 3.3A output current, 3300 kHz switching frequency, and 85°C max operating temp. Ideal for industrial applications requiring efficient power management in a compact package.
UCC25600DRG4
UCC25600DRG4 by Texas Instruments is a voltage-mode switching controller with BICMOS technology. It operates in automotive-grade temperatures (-40 to 125°C) and supports input voltages from 11V to 18V. With a max switching frequency of 400 kHz, it's ideal for applications requiring resonant control in compact designs.
MC33063ADR2G
MC33063ADR2G by Onsemi is a voltage-mode switching regulator with max output current of 1.5A and max input voltage of 40V. It operates in industrial temp range (-40 to 85°C) using pulse width modulation control technique. Ideal for applications requiring efficient buck-boost switcher config at up to 100kHz frequency.
TPS82130SILT
TPS82130SILT by Texas Instruments is a voltage-mode switching regulator with 3A output current, operating at -40 to 125°C. Ideal for automotive applications, it offers a wide input voltage range of 3-17V and a compact package style of 2.8mm x 3mm, making it suitable for space-constrained designs.
LM2672M-ADJ
LM25011Q1MYX/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-609 Code: e3;
LMZM23601V5SILR
LMZM23601V5SILR by Texas Instruments is a switching regulator with 1A output current, 1100kHz max switching frequency, and 5V nominal output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact rectangular package style. Suitable for various power management needs in automotive electronics.
LM5575MHX/NOPB
Switching Regulator or Controllers; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: TSSOP16,.25;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LV5061V-TLM-H
Switching Regulator or Controllers; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5050NV-TLM-E
LV5050NV-TLM-E by Onsemi is a voltage-mode switching regulator with a max operating temperature of 85°C and a max switching frequency of 1100 kHz. This BICMOS technology device comes in a small outline package, making it suitable for various applications requiring high-frequency power conversion.
LV5069JA
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5066V
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5052V-TLM-E
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 30; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5071M
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 12; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5044V
DUAL SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 30; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5065VB
DUAL SWITCHING CONTROLLER;
LV5050V
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5068V-TLM-H
LV5068V
LV5052V
LV5069JA-AH
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5050NV
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 20; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5061V
LV5040V
LV5044V-TLM-E
LV5051T
Switching Regulator or Controllers; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LV5068V-MPB-H
Sanyo Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved