Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FSDM1265RBWDTU by Onsemi is a switching regulator with 6 terminals, operating temperature range of -25 to 85 °C. It features a max output current of 3.8A, control mode in current-mode, and pulse width modulation technique. Ideal for applications requiring single switcher configuration and nominal input voltage of 10V within an input voltage range of 9-18V.
Median Price
$2.030
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$1.910
1k+ parts
$1.730
10k+ parts
-
Digiode
$1.928
Vyrian
Chip Stock
Flip Electronics
Corphita
$1.827
Corohmni
Native Components
$9.668
Northwest PG Solutions
$10.635
$9.571
TANS Electronics
SupplyDigital Components
Kulean Microsystems
Problanco Electronics
Authorized Procurement Solutions
GreenTree Electronics
Supply Digital
UHIMA Technologies
Perfect Parts
Microchip USA
Rectangular package shape allows for efficient use of space on a PCB, making it a good choice for compact designs.
Having 6 terminals provides flexibility in connecting the regulator to other components, enhancing the product's versatility.
Flange mount package style offers secure mounting options, ensuring stability and ease of installation in various applications.
With a high maximum operating temperature, this regulator can withstand elevated temperatures, making it suitable for demanding environments.
Current-mode control provides precise regulation of output current, ensuring stable performance and efficient power management.
The wide range of minimum operating temperature allows this regulator to operate effectively in both low and high-temperature conditions.
Matte tin terminal finish offers good solderability and corrosion resistance, enhancing the reliability and longevity of the product.
Zig-zag terminal position facilitates easy and secure connection of external components, improving the overall robustness of the regulator.
Being a switching regulator type, this product offers high efficiency and fast response times, making it ideal for power conversion applications.
A nominal input voltage of 10V ensures compatibility with a wide range of input sources, making it a versatile choice for various power supply requirements.
High maximum output current capability enables the regulator to power demanding loads without any performance issues, ensuring reliable operation.
Through-hole terminal form allows for easy and secure mounting on a PCB, providing mechanical stability and facilitating soldering during assembly.
Pulse width modulation control technique offers efficient and precise regulation of output voltage, ensuring stable performance under varying load conditions.
Single switcher configuration simplifies the design and operation of the regulator, reducing complexity and enhancing reliability.
A low minimum input voltage requirement of 9V allows the regulator to operate effectively even with lower input sources, increasing its flexibility in different applications.
With a high maximum input voltage rating, this regulator can handle a wide range of input voltages, making it suitable for diverse power supply systems.
Switching Regulators & Controllers FSDM1265RBWDTU attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Surface Mount:
Switcher Config:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Position:
FSDM1265RBWDTU Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1554216004
Molex
WIRE AND CABLE;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bourns
Diotec Semiconductor Ag
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
TPS62160DGKR
Texas Instruments
TPS62160DGKR by Texas Instruments is a switching regulator with a 1A output current and 2250 kHz max switching frequency. It operates b/w -40 to 85°C, suitable for industrial applications. With a compact design of 3x3mm, it supports input voltages from 3V to 17V, making it ideal for various power supply designs.
LM2596DSADJG
Onsemi
LM2596DSADJG by Onsemi is a 5-terminal switching regulator with voltage-mode control. It operates b/w -40 to 125°C, suitable for automotive applications. With a max output current of 7.5A and a buck switcher configuration, it supports input voltages from 4.5V to 40V, making it ideal for various power supply designs.
TPS552882RPMR
TPS552882RPMR by Texas Instruments is a switching regulator with 26 terminals, operating temperature range of -40 to 125°C. It features a current-mode control mode, pulse width modulation technique, and buck-boost switcher configuration. Ideal for automotive applications due to its compact chip carrier package style and wide input voltage range of 2.7V to 36V.
TPS40055PWPR
TPS40055PWPR by Texas Instruments is a voltage-mode switching controller with a max output current of 20A and a max output voltage of 35V. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring high efficiency and precision control. The compact rectangular package style with gull wing terminals and push-pull switcher configuration enables space-saving designs in electronic devices.
TPS62040DGQ
TPS62040DGQ by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 85°C, and output voltage ranging from 0.7V to 6V. It is ideal for industrial applications requiring a compact design and high efficiency power management up to 2.2A output current at a max frequency of 1500kHz.
SG3525AP013TR
SG3525AP013TR by STMicroelectronics is a 16-terminal switching controller with PWM control mode, operating b/w 0-70°C. It has a max output current of 0.5A and supports a max switching frequency of 500kHz. Ideal for applications requiring voltage-mode control in small outline packages.
LM2674M-ADJ/NOPB
LM2674M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with max output of 37V, 0.5A current, and 260kHz frequency. Ideal for automotive applications due to its DMOS technology, it operates b/w -40°C to 125°C range and supports input voltages from 6.5V to 40V.
LMZ14202HTZX/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Finish: MATTE TIN; Control Mode: VOLTAGE-MODE; JESD-609 Code: e3;
LM2576T-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
LM2575T-15G
LM2575T-15G by Onsemi is a BIPOLAR SWITCHING REGULATOR with 3.2A output current, VOLTAGE-MODE control mode, and 63 kHz switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and 18-40V input voltage support.
TPSM828222SILR
TPSM828222SILR by Texas Instruments is a switching regulator with 2A output current and 1.8V nominal output voltage, suitable for automotive applications. It operates b/w -40 to 125°C, with a max switching frequency of 4000 kHz. This MICROELECTRONIC ASSEMBLY package has a compact size of 2.5mm x 2mm x 1.1mm, making it ideal for space-constrained designs.
UCC28C45DR
UCC28C45DR by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in an industrial temperature grade range from -40°C to 105°C, making it suitable for various power management applications requiring precise control and efficiency. The package style is small outline with dual terminals, ideal for compact designs where space is limited.
TL494IN
Rochester Electronics
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LMR50410Y5FQDBVRQ1
LMR50410Y5FQDBVRQ1 by Texas Instruments is a switching regulator with 1A output current, 5V nominal output voltage, and 2100 kHz max switching frequency. Ideal for automotive applications due to its AEC-Q100 screening level and wide temperature range (-40 to 150°C).
LMZ31707RVQT
LMZ31707RVQT by Texas Instruments is a switching regulator with max output current of 7A, max input voltage of 17V, and max operating temp of 85°C. Ideal for industrial applications requiring efficient power management in compact spaces.
TPS62111RSATG4
TPS62111RSATG4 by Texas Instruments is a voltage-mode switching regulator with a max output current of 2.4A and a max switching frequency of 1100kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring stable power conversion in compact spaces. The chip carrier package style with very thin profile and no-lead terminal form enhances its versatility for use in space-constrained designs.
LM5017SDX/NOPB
LM5017SDX/NOPB by Texas Instruments is a switching regulator with max output voltage of 90V, max output current of 0.6A, and max switching frequency of 1MHz. Ideal for automotive applications due to its temp grade and small outline package style.
LMR36506R5RPER
LMR36506R5RPER by Texas Instruments is a switching regulator with a nominal input voltage of 24V and output voltage of 5V. It operates in current-mode control technique with a max output current of 0.6A, making it suitable for automotive applications requiring efficient power management in compact spaces. With a wide temperature range from -40°C to 150°C and high switching frequency of 2200 kHz, this chip carrier package offers reliable performance in demanding environments.
TPS62130RGTRF0
TPS62130RGTRF0 by Texas Instruments is a switching regulator with 16 terminals, operating b/w -40 to 85°C. It features a buck switcher configuration, PWM control technique, and can handle input voltages from 3V to 17V. Ideal for industrial applications requiring high efficiency and compact design with a max switching frequency of 2500 kHz.
TPS5420DRG4
TPS5420DRG4 by Texas Instruments is a switching regulator with 2A output current, 500kHz max switching frequency, and 1.23V min output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact small outline package design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSDM0565RBIWDTU
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 6; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Fairchild Semiconductor
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 6; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FSDM0565REWDTU
FSDM0565REWDTU by Onsemi is a switching regulator with 11A output current, 72kHz switching frequency, and -25 to 85°C operating temperature range. It is used in applications requiring pulse width modulation control for single switcher configurations.
FSDM0565RBWDTU
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 6; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 11 A;
FSDM0365RN
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
FSDM07652RE
SWITCHING CONTROLLER;
FSDM07652REWDTU
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 6; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE;
FSDM07652RWDTU
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 6; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Operating Temperature: -25 Cel;
FSDM07652RBWDTU
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 6; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 15 A;
FSDM0465REWDTU
FSDM0365RL
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSDM0365RNB
FSDM0365RNB by Onsemi is a switching regulator IC with 2.41A output current, 73kHz max switching frequency, and -25 to 85°C operating temp range. Ideal for power supply applications due to its current-mode control, pulse width modulation technique, and through-hole terminal form.
FSDM0265RNB
FSDM0465RBWDTU
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 6; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Operating Temperature: 85 Cel;
FSDM0565RE
FSDM0465RE
FSDM1265RBWDTU
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved