Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FQA28N15 by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 132A and EAS of 300mJ, making it suitable for high-power tasks. With a low 0.09 ohm RDS(on), this transistor operates in ENHANCEMENT MODE at up to 175°C, offering reliable performance in various industrial settings.
Median Price
$1.790
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Newark
1+ parts
$1.310
100+ parts
-
1k+ parts
10k+ parts
Arrow
$2.301
$2.271
$1.661
Flip Electronics (Authorized)
Verical
Avnet
$1.092
$1.036
Nova Conductors
$1.196
Digiode
$1.244
Chip Stock
Flip Electronics
Vyrian
A&K Electronics
Bristol Electronics
Ampacity Inc.
$1.110
Corohmni
$1.149
Corphita
$1.179
Argo Parts USA
Continental Prestige Electronics
$1.172
Aztec Data Supply Inc.
$1.453
Metaverse IC Inc.
Lixinc
TANS Electronics
A-Z Elektronik GmbH
SupplyDigital Components
Problanco Electronics
Perfect Parts
Microchip USA
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
Supply Digital
Alle Elektronik GmbH
Kepictronics
UHIMA Technologies
Authorized Procurement Solutions
Netroflash
$1.136
$1.112
PLASTIC/EPOXY - Provides durability and protection for the internal components, making it suitable for various applications.
N-CHANNEL - Offers efficient current flow and performance in switching applications.
SINGLE WITH BUILT-IN DIODE - Simplifies circuit design and saves space by integrating a diode within the transistor.
SWITCHING - Specifically designed for switching tasks, ensuring reliable operation in such applications.
150 V - Can handle high voltages, making it suitable for a wide range of power applications.
RECTANGULAR - Facilitates easy mounting and integration into electronic devices.
THROUGH-HOLE - Enables secure and reliable connections to circuit boards.
ENHANCEMENT MODE - Offers better control over the switching characteristics, improving efficiency.
132 A - Capable of handling high current pulses without damage.
300 mJ - Provides protection against voltage spikes and ensures reliability in harsh conditions.
33 A - Can handle continuous high current loads without overheating.
3 - Simplifies circuit connections and reduces component count.
227 W - Can dissipate heat effectively, ensuring stable operation in high-power applications.
FLANGE MOUNT - Offers easy mounting options for various mounting configurations.
METAL-OXIDE SEMICONDUCTOR - Provides high efficiency and performance in switching applications.
175 °C - Can withstand high temperatures, making it suitable for harsh environments.
SILICON - Offers high performance and reliability in electronic circuits.
MATTE TIN - Ensures good electrical conductivity and corrosion resistance for a long lifespan.
0.09 ohm - Offers low resistance for efficient power switching and minimal heat dissipation.
SINGLE - Simplifies installation and connection to circuits.
Power Field Effect Transistors (FET) FQA28N15 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Additional Features:
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
FQA28N15 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
Intersil
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Taiwan Semiconductor
IRF4905STRLPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Terminal Finish: MATTE TIN OVER NICKEL; Terminal Position: SINGLE;
IRLML0040TRPBF
Infineon Technologies
Infineon's IRLML0040TRPBF is a N-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 15A IDM, 3.6A ID, and 0.056 ohm RDS(on). With a small outline package style and -55 to 150 °C operating range, it offers high performance in compact designs.
IRF4905PBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; JESD-30 Code: R-PSFM-T3; Operating Mode: ENHANCEMENT MODE;
IRF640STRRPBF
Vishay Intertechnology
Vishay Intertechnology's IRF640STRRPBF is a N-CHANNEL Power FET with 200V DS Breakdown Voltage. It has a max Drain Current of 18A and Pulsed Drain Current of 72A, suitable for SWITCHING applications. The transistor operates in ENHANCEMENT MODE, with a power dissipation of 130W in a SMALL OUTLINE package style.
FQD7P20TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 55 W; Peak Reflow Temperature (C): 260; Transistor Application: SWITCHING;
FDS8984-F085
FDS8984-F085 by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage, suitable for SWITCHING applications. It features 2 ELEMENTS WITH BUILT-IN DIODE in a RECTANGULAR package with GULL WING terminals. With a Max Pulsed Drain Current of 30A and 0.023 ohm Drain-Source On Resistance, it operates in ENHANCEMENT MODE at up to 150°C.
FQT7N10LTF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Minimum DS Breakdown Voltage: 100 V; Package Shape: RECTANGULAR;
IRFL9014PBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PSSO-G3; No. of Terminals: 3; No. of Elements: 1;
IRFP460LCPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Transistor Application: SWITCHING; Maximum Operating Temperature: 150 Cel; Maximum Drain-Source On Resistance: .27 ohm;
IRFP460
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Maximum Drain Current (Abs) (ID): 20 A; Maximum Operating Temperature: 150 Cel;
FDS3890
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
IRF7319TRPBF
IRF7319TRPBF by Infineon is a Power FET with N- and P-channel types. It features 2 separate elements with built-in diode, ideal for switching applications. With a max pulsed drain current of 30A and low on-resistance of 0.029 ohm, it operates in enhancement mode for efficient performance.
IRF7410TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Terminal Form: GULL WING; Maximum Time At Peak Reflow Temperature (s): 30;
IRF840SPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; No. of Elements: 1;
SI7113ADN-T1-GE3
SI7113ADN-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 20A IDM, 11.25mJ EAS, and 0.132 ohm Drain-Source On Resistance. Operating from -55 to 150 °C, it has a DUAL Terminal Position and DRAIN Case Connection.
IRFS7530TRL7PP
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 375 W; No. of Elements: 1; JESD-609 Code: e3;
FDMS86101
FDMS86101 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 200A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.008 ohm RDS(on), and 135mJ EAS rating. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 104W in a small outline package.
SIA456DJ-T1-GE3
Vishay Intertechnology's SIA456DJ-T1-GE3 is a N-channel Power FET with 200V DS breakdown voltage and 2.6A max drain current. Ideal for switching applications, it operates in enhancement mode with 55ns turn on time and 75ns turn off time. Suitable for surface mount, this transistor has a max power dissipation of 19W in a small outline package.
IRF1010NSTRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Qualification: Not Qualified; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
DMP3098L-7
Diodes Incorporated
DMP3098L-7 by Diodes Inc. is a P-channel power FET with a min DS breakdown voltage of 30V and max pulsed drain current of 11A. It is used for switching applications and operates in enhancement mode.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTHL099N60S5
NTHL099N60S5 by Onsemi is a Power FET with 600V DS Breakdown Voltage, 95A IDM, and 0.099 ohm RDS(on). It is used for switching applications in enhancement mode with a max power dissipation of 184W. The transistor operates b/w -55 to 150 °C and features an avalanche energy rating of 232mJ.
FQA24N50
FQA24N50 by Onsemi is a power FET with a min DS breakdown voltage of 500V, making it suitable for switching applications. It has a max pulsed drain current of 96A and a max drain-source on resistance of 0.2 ohm.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 290 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): 24 A;
FQA24N50F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 290 W; JESD-609 Code: e3; Package Body Material: PLASTIC/EPOXY;
FQA28N50
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 310 W; Maximum Drain Current (ID): 28.4 A; Qualification: Not Qualified;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; Transistor Element Material: SILICON; Terminal Form: THROUGH-HOLE;
FQA28N50F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 310 W; Maximum Drain Current (ID): 28.4 A; Minimum DS Breakdown Voltage: 500 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 310 W; Maximum Drain Current (Abs) (ID): 28.4 A; Transistor Application: SWITCHING;
FQA24N60
FQA24N60 by Onsemi is a N-CHANNEL Power FET with 600V DS Breakdown Voltage, ideal for SWITCHING applications. It features 94A IDM, 1300mJ EAS, and 0.24ohm RDS(ON). With a max power dissipation of 310W and operating temperature up to 150°C, it's suitable for high-power circuits.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 310 W; Maximum Pulsed Drain Current (IDM): 94 A; No. of Elements: 1;
FQA28N15
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 227 W; Maximum Operating Temperature: 175 Cel; Terminal Finish: MATTE TIN;
FQA27N25
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 108 W; Maximum Drain-Source On Resistance: .11 ohm; JESD-609 Code: e3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 108 W; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
FQA22P10
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 150 W; Terminal Position: SINGLE; Maximum Drain Current (Abs) (ID): 24 A;
FQA20N40
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Qualification: Not Qualified; Terminal Position: SINGLE;
FQA22N30
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 190 W; Operating Mode: ENHANCEMENT MODE; Terminal Form: THROUGH-HOLE;
FQA26N30
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; No. of Terminals: 3; JESD-609 Code: e0;
FQA24N50F_NL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Drain-Source On Resistance: .2 ohm; No. of Elements: 1; Terminal Form: THROUGH-HOLE;
FQA28N15_F109
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 227 W; Maximum Drain-Source On Resistance: .09 ohm; Operating Mode: ENHANCEMENT MODE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved