Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD2712AV by Onsemi is a SINGLE optocoupler with a Max Forward Current of 0.02A, ideal for applications requiring high isolation voltage up to 2500V. With a Min Current Transfer Ratio of 100%, it operates b/w -40°C to 85°C and features a Matte Tin terminal finish for surface mounting.
Median Price
$0.848
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.290
100+ parts
$0.680
1k+ parts
$0.544
10k+ parts
$0.480
Mouser Electronics
$0.489
$0.444
Arrow
-
$0.406
Verical
$0.403
Nova Conductors
$0.499
Digiode
$1.216
Chip Stock
Flip Electronics
Vyrian
Aztec Data Supply Inc.
$0.119
Ampacity Inc.
$0.345
Corohmni
Continental Prestige Electronics
Argo Parts USA
$0.484
Semicontronic
$0.750
$0.731
$0.728
Corphita
$1.152
Component Stockers USA
$1.240
$0.580
$0.440
iodParts Technologies Inc.
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
SupplyDigital Components
TANS Electronics
Problanco Electronics
Supply Digital
UHIMA Technologies
Netroflash
$0.474
$0.464
Perfect Parts
Single configuration makes it easy to use and integrate into circuit design.
Low forward current helps in saving energy and prevents overheating.
Transistor output ensures efficient switching and compatibility with various applications.
High operating temperature range allows reliable performance in varying environmental conditions.
Low minimum operating temperature ensures functionality in cold environments.
Matte tin finish provides good electrical conductivity and corrosion resistance.
Low power dissipation helps in energy efficiency and prevents overheating.
High current transfer ratio ensures accurate signal transmission.
Low dark current minimizes signal distortion in low light conditions.
High breakdown voltage ensures protection against voltage spikes and surges.
Consistent current transfer ratio ensures reliable performance over time.
High isolation voltage ensures safety and protection against electrical hazards.
Surface mount design enables easy and secure installation on circuit boards.
Low forward voltage drop helps in minimizing power losses and improving efficiency.
High on state current rating allows for reliable switching and handling of current loads.
Optocoupler Transistor Outputs FOD2712AV attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
FOD2712AV Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
General Semiconductor
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
Onsemi
Lite-on Semiconductor
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SFH6156-3
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .06 A; Maximum Isolation Voltage: 5300 V; Nominal Current Transfer Ratio: 100 %; Additional Features: UL APPROVED;
LTV-827S-TA1-B
Lite-on Technology
The Lite-on Technology LTV-827S-TA1-B is a 2-channel optocoupler with separate configuration. It has a max forward current of 0.05 A and operates b/w -30 to 100°C. Ideal for applications requiring high isolation voltage, low response time, and surface mounting feature.
TLP292-4(LGB-TP,E
Toshiba
Toshiba's TLP292-4(LGB-TP,E is a 4-channel optocoupler with AC input-transistor output. It has a max forward current of 0.05A, min transfer ratio of 100%, and max isolation voltage of 3750V. Ideal for applications requiring high electrical isolation in temperature range -55 to 125°C.
SFH6186-5
Siemens
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Minimum Operating Temperature: -55 Cel; Configuration: SINGLE; Maximum Isolation Voltage: 5300 V; Maximum Operating Temperature: 100 Cel;
H11G1TVM
The Onsemi H11G1TVM is a single optocoupler with a max forward current of 0.06A and Darlington output type. It operates b/w -40°C to 100°C, has an isolation voltage of 7500V, and is ideal for applications requiring high current transfer ratio in through-hole mounting configurations.
SFH690BT
Vishay Intertechnology SFH690BT is a single optocoupler with max forward current of 0.05A, operating temp range -55 to 100°C, and isolation voltage of 3750V. Ideal for applications requiring high collector-emitter breakdown voltage, low dark current, and reliable signal transfer in harsh environments.
CNY17F-2
Telefunken Microelectronics
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .06 A; Maximum Power Dissipation: .15 W; No. of Elements: 1; Minimum Current Transfer Ratio: 63 %;
4N35G
Isocom Components
Isocom Components' 4N35G is a single optocoupler with max forward current of 0.06A, operating temp range -55 to 100°C, and isolation voltage of 5300V. Ideal for applications requiring high current transfer ratio, low dark current, and fast response time in through-hole mounting setups.
FOD817DSD
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Response Time: .000018 s; Minimum Current Transfer Ratio: 300 %; Maximum Power Dissipation: .15 W;
4N27
Qt Optoelectronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .08 A;
CNY17-3SM
The Isocom Components CNY17-3SM is a single optocoupler with a max forward current of 0.06A, ideal for applications requiring high isolation voltage up to 5300V. With a min operating temp of -55°C and max temp of 100°C, it offers reliable performance in various environments. Its transistor output type and surface mount feature make it suitable for electronic circuits needing efficient signal transmission.
4N25
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; Maximum Isolation Voltage: 5300 V; JESD-609 Code: e3; Maximum Forward Current: .1 A;
TLP291-4(GB,E
Toshiba's TLP291-4(GB,E is a 4-channel optocoupler with separate configuration. It has a max forward current of 0.05A and min transfer ratio of 100%. Ideal for applications requiring high isolation voltage up to 2500V, such as in industrial control systems.
OPI1264B
Optek Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Nominal Current Transfer Ratio: 50 %; Configuration: SINGLE; Additional Features: UL RECOGNIZED; Maximum Dark Current: 200 nA; Maximum Isolation Voltage: 10000 V;
CNY17F2
North American Philips Discrete Products Div
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Power Dissipation: .15 W; Maximum On State Current: .05 A; Maximum Isolation Voltage: 4400 V;
TLP292-4(TPR,E
Toshiba's TLP292-4(TPR,E is a 4-channel optocoupler with max. forward current of 0.05A, ideal for AC input-transistor output applications. With max. operating temp of 125°C and min. isolation voltage of 3750V, it offers reliable performance in various circuits. Featuring surface mounting, this optocoupler has a min C-E breakdown voltage of 80V and low dark current at 80nA.
HMHA2801C
The Onsemi HMHA2801C is a single optocoupler with a max forward current of 0.05A and collector-emitter breakdown voltage of 80V. With a nominal current transfer ratio of 50%, it offers isolation voltage up to 2500V. Ideal for applications requiring high-voltage isolation and signal transmission in temperature range from -55°C to 100°C.
PS2801-1-F3-A-K
Nec Electronics America
TRANSISTOR OUTPUT OPTOCOUPLER; Additional Features: UL RECOGNIZED; Maximum Isolation Voltage: 2500 V; Maximum Dark Current: 100 nA; Minimum Operating Temperature: -55 Cel; Minimum Collector-emitter Breakdown Voltage: 80 V;
LTV-356T-TP1-B
The Lite-on Technology LTV-356T-TP1-B is a single optocoupler with a max forward current of 0.05A and operating temperature range from -55 to 110°C. With a min C-E breakdown voltage of 80V, it's ideal for applications requiring high isolation voltage up to 3750V, such as in power supplies or industrial control systems.
FOD817DS
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 300 %; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Forward Voltage: 1.4 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD2712AR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Maximum Forward Current: .02 A;
FOD2712AR2V by Onsemi is a single optocoupler with a max forward current of 0.02 A and min operating temperature of -40°C, ideal for applications requiring high isolation voltage up to 2500 V. With a collector-emitter breakdown voltage of 70 V and surface mounting feature, it offers reliable performance in various electronic circuits.
FOD2712AR2
FOD2712AR2 by Onsemi is a single optocoupler with max forward current of 0.02A, min operating temp -40°C, and max isolation voltage of 2500V. Ideal for applications requiring high collector-emitter breakdown voltage, such as industrial control systems and power supplies.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum Forward Current: .02 A; Configuration: SINGLE;
FOD2742BR2
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Current Transfer Ratio: 100 %; Maximum Operating Temperature: 85 Cel;
FOD2742BR2 by Onsemi is a single optocoupler with max forward current of 0.02A, min operating temp -25°C, and max isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
FOD2742BR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Forward Voltage: 1.5 V; Maximum Dark Current: 50 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -25 Cel; Maximum Forward Current: .02 A; Maximum On State Current: .05 A;
FOD2742BV
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 2500 V; Maximum Power Dissipation: .085 W; No. of Elements: 1;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 140 %; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .02 A; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2712A
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum On State Current: .05 A; Maximum Operating Temperature: 85 Cel; Maximum Isolation Voltage: 2500 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; No. of Elements: 1; Maximum Dark Current: 50 nA; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2712AV
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2742B
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.5 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Dark Current: 50 nA; Maximum Power Dissipation: .085 W; Maximum Operating Temperature: 85 Cel;
FOD2741BSDV
FOD2741BSDV by Onsemi is a single optocoupler with a min C-E breakdown voltage of 70V. It has a max isolation voltage of 5000V and min current transfer ratio of 100%. Ideal for applications requiring high voltage isolation, such as industrial control systems.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 100 %; Maximum Dark Current: 50 nA; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2741AS
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: UL APPROVED; Maximum Forward Current: .02 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Maximum Power Dissipation: .085 W;
FOD2711AT
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Power Dissipation: .085 W; Maximum Dark Current: 50 nA; Additional Features: UL APPROVED; Maximum Forward Voltage: 1.5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved