Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FOD2712A by Onsemi is a single optocoupler with max forward current of 0.02A, operating temp range -40 to 85°C, and isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
Median Price
$1.350
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.712
1k+ parts
$0.572
10k+ parts
$0.490
Mouser Electronics
$0.713
$0.543
$0.467
Verical
-
$0.425
Nova Conductors
$0.502
Digiode
$1.282
Chip Stock
Vyrian
Flip Electronics
Bristol Electronics
Atlantic Semiconductor
LWI Electronics Inc
Prism Electronics
Semicontronic
$0.411
$0.401
$0.399
Corohmni
$0.482
Continental Prestige Electronics
$0.492
Argo Parts USA
$0.487
Aztec Data Supply Inc.
$0.578
Modulus Dynamics
$0.592
Ampacity Inc.
$1.150
Corphita
$1.215
Component Stockers USA
$99.990
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Kepictronics
Lixinc
Authorized Procurement Solutions
Kulean Microsystems
Problanco Electronics
TANS Electronics
SupplyDigital Components
Netroflash
$0.477
UHIMA Technologies
Supply Digital
Single configuration allows for easy integration into circuits and systems.
High maximum forward current ensures reliable performance under various operating conditions.
Transistor output optocoupler provides efficient signal transmission and isolation between input and output.
Wide operating temperature range allows for use in diverse environments.
Low minimum operating temperature ensures functionality even in cold conditions.
Matte tin terminal finish enhances solderability and durability.
Low power dissipation helps in reducing energy consumption and heat generation.
High current transfer ratio ensures accurate signal transmission without loss.
Low dark current reduces signal distortion and maintains signal integrity.
High collector-emitter breakdown voltage provides protection against voltage surges.
Consistent current transfer ratio ensures reliable performance over time.
High isolation voltage ensures effective isolation between input and output circuits.
Surface mount allows for easy and secure installation on PCBs.
Low maximum forward voltage helps in reducing power consumption and heat dissipation.
High maximum on-state current allows for handling larger loads with ease.
Optocoupler Transistor Outputs FOD2712A attributes and parameters. Explore more Optocoupler Transistor Outputs devices from Onsemi
Additional Features:
Minimum Collector-emitter Breakdown Voltage:
Configuration:
Minimum Current Transfer Ratio:
Nominal Current Transfer Ratio:
Maximum Dark Current:
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
FOD2712A Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Frontier Electronics
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Surge Components
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Crimson Semiconductor
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
Fairchild Semiconductor
4N35-X007
Vishay Semiconductors
TRANSISTOR OUTPUT OPTOCOUPLER; No. of Elements: 1; Maximum Isolation Voltage: 5300 V; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Dark Current: 50 nA; Minimum Operating Temperature: -55 Cel;
6N135
North American Philips Discrete Products Div
Optocoupler - Transistor Outputs; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; No. of Elements: 1; Maximum Power Dissipation: .1 W;
TLP290(GB-TP,SE
Toshiba
Toshiba's TLP290(GB-TP,SE optocoupler features a single element with AC input-transistor output. It has a max forward current of 0.05A and isolation voltage of 3750V, making it ideal for applications requiring high voltage protection in temperatures ranging from -55 to 110°C.
TLP281-4(GB)
Toshiba's TLP281-4(GB) is a 4-channel optocoupler with max. forward current of 0.05A, operating temp. range -55 to 100°C, and isolation voltage of 2500V. Ideal for applications requiring high collector-emitter breakdown voltage (80V) and nominal current transfer ratio of 100%.
CNY65BEXI
Vishay Intertechnology
Vishay Intertechnology's CNY65BEXI is a transistor output optocoupler with max forward current of 0.075A, min operating temp of -55°C, and max isolation voltage of 11600V. Ideal for applications requiring high isolation voltage and reliable signal transmission in harsh environments.
FOD817B300W
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 110 Cel; Minimum Current Transfer Ratio: 130 %; Minimum Collector-emitter Breakdown Voltage: 70 V;
TLP187(E
Toshiba's TLP187(E is a single optocoupler with built-in diode and resistor, featuring a max forward current of 0.05A. With a Darlington output configuration, it offers high isolation voltage of 3750V for applications requiring reliable signal transfer in harsh environments. Ideal for surface mount installations, this optocoupler has a wide operating temperature range from -55°C to 110°C.
JANTX4N24A
Optek Technology
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 1000 V; Nominal Current Transfer Ratio: 100 %; Maximum Forward Voltage: 1.3 V;
TLP181(F)
Toshiba's TLP181(F) optocoupler has a max forward current of 0.05A, isolation voltage of 3750V, and operates b/w -55°C to 110°C. Ideal for surface mount applications, it offers a min CTR of 50% and max power dissipation of 0.15W.
TLP521-4GB
Isocom
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin (Sn); Maximum Power Dissipation: .15 W; Packing Method: TUBE; Maximum Operating Temperature: 100 Cel;
OPI1264C
Optotek
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; No. of Elements: 1; Nominal Current Transfer Ratio: 100 %; Maximum Operating Temperature: 85 Cel; Maximum Isolation Voltage: 10000 V;
HMHAA280R2
The Onsemi HMHAA280R2 is a single optocoupler with AC input-transistor output. It has a max forward current of 0.05 A and operates b/w -55°C to 100°C. With an isolation voltage of 2500 V, it's ideal for applications requiring high voltage protection in surface mount configurations.
VO618A-3X017T
VO618A-3X017T by Vishay Intertechnology is a SINGLE optocoupler with max. forward current of 0.06 A, operating temp. range -55 to 100°C, and min. collector-emitter breakdown voltage of 80 V. Ideal for applications requiring high isolation voltage up to 5000 V, such as industrial control systems and power supplies.
FOD817CSD
FOD817CSD by Onsemi is a single optocoupler with a max forward current of 0.05A and min operating temperature of -55°C, ideal for applications requiring high isolation voltage up to 5000V. With a fast response time of 18μs, it is suitable for surface mounting in various electronic circuits needing reliable transistor output optocouplers.
ILD213T
Vishay Dale
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Minimum Collector-emitter Breakdown Voltage: 70 V; Maximum Isolation Voltage: 4000 V; Maximum Forward Current: .03 A; Maximum Dark Current: 50 nA;
PS2801-1-F3-A-K
Nec Electronics
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Isolation Voltage: 2500 V; Maximum Forward Current: .05 A; Minimum Operating Temperature: -55 Cel; Additional Features: UL RECOGNIZED;
SFH6186-2T
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: MATTE TIN; No. of Elements: 1; Maximum Operating Temperature: 100 Cel; Maximum Forward Current: .05 A; Minimum Operating Temperature: -55 Cel;
FODM124R2V
FODM124R2V by Onsemi is a SINGLE optocoupler with a max forward current of 0.05A and min operating temperature of -40°C. With a collector-emitter breakdown voltage of 80V, it's ideal for applications requiring high isolation voltage up to 3750V in surface mount configurations.
HMHA2801AR2
The Onsemi HMHA2801AR2 is a SINGLE Optocoupler Transistor Output with a Max Forward Current of 0.05A and Min C-E Breakdown Voltage of 80V. Ideal for applications requiring high isolation voltage up to 3750V, such as industrial control systems and power supplies.
TLP292-4(GB,E
Toshiba's TLP292-4(GB,E is a 4-channel optocoupler with max. forward current of 0.05A, ideal for AC input-transistor output applications. With min. C-E breakdown voltage of 80V and isolation voltage of 3750V, it operates b/w -55°C to 125°C temperature range. Featuring surface mounting, it has a min. current transfer ratio of 100%.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FOD2712AR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Additional Features: UL RECOGNIZED, VDE APPROVED; No. of Elements: 1; Maximum Forward Current: .02 A;
FOD2712AR2V by Onsemi is a single optocoupler with a max forward current of 0.02 A and min operating temperature of -40°C, ideal for applications requiring high isolation voltage up to 2500 V. With a collector-emitter breakdown voltage of 70 V and surface mounting feature, it offers reliable performance in various electronic circuits.
FOD2712AR2
FOD2712AR2 by Onsemi is a single optocoupler with max forward current of 0.02A, min operating temp -40°C, and max isolation voltage of 2500V. Ideal for applications requiring high collector-emitter breakdown voltage, such as industrial control systems and power supplies.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Additional Features: UL RECOGNIZED; Maximum Forward Current: .02 A; Configuration: SINGLE;
FOD2742BR2
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; Minimum Current Transfer Ratio: 100 %; Maximum Operating Temperature: 85 Cel;
FOD2742BR2 by Onsemi is a single optocoupler with max forward current of 0.02A, min operating temp -25°C, and max isolation voltage of 2500V. Ideal for applications requiring high current transfer ratio, low dark current, and surface mounting feature.
FOD2742BR2V
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Maximum Forward Voltage: 1.5 V; Maximum Dark Current: 50 nA;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -25 Cel; Maximum Forward Current: .02 A; Maximum On State Current: .05 A;
FOD2742BV
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Isolation Voltage: 2500 V; Maximum Power Dissipation: .085 W; No. of Elements: 1;
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 140 %; Maximum Operating Temperature: 85 Cel; Maximum Forward Current: .02 A; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2712A
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED; No. of Elements: 1; Maximum Dark Current: 50 nA; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2712AV
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Additional Features: UL RECOGNIZED, VDE APPROVED; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Minimum Collector-emitter Breakdown Voltage: 70 V;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Current: .02 A; Maximum Forward Voltage: 1.5 V; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2742B
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.5 V; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; Maximum Dark Current: 50 nA; Maximum Power Dissipation: .085 W; Maximum Operating Temperature: 85 Cel;
FOD2741BSDV
FOD2741BSDV by Onsemi is a single optocoupler with a min C-E breakdown voltage of 70V. It has a max isolation voltage of 5000V and min current transfer ratio of 100%. Ideal for applications requiring high voltage isolation, such as industrial control systems.
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Nominal Current Transfer Ratio: 100 %; Maximum Dark Current: 50 nA; No. of Elements: 1; Minimum Collector-emitter Breakdown Voltage: 70 V;
FOD2741AS
TRANSISTOR OUTPUT OPTOCOUPLER; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -25 Cel; Additional Features: UL APPROVED; Maximum Forward Current: .02 A;
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: SURFACE MOUNT; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Minimum Operating Temperature: -40 Cel; Maximum Power Dissipation: .085 W;
FOD2711AT
TRANSISTOR OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Maximum Power Dissipation: .085 W; Maximum Dark Current: 50 nA; Additional Features: UL APPROVED; Maximum Forward Voltage: 1.5 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved