Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDMF5068 by Onsemi is a 39-terminal switching regulator with a max output current of 70A and a switching frequency of 1MHz. It uses pulse width modulation control technique and is ideal for buck switcher applications requiring a nominal input voltage of 12V.
Median Price
$2.075
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Arrow
1+ parts
$1.726
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$2.855
$2.018
$1.767
Mouser Electronics
$5.030
$2.380
$2.020
$1.840
Rochester
$1.850
$1.660
$1.560
Verical
$1.950
Digiode
$1.948
Vyrian
$2.050
Flip Electronics
Corphita
$1.845
Corohmni
Native Components
$258.490
$253.321
$250.736
$248.151
Northwest PG Solutions
$284.339
Kulean Microsystems
TANS Electronics
SupplyDigital Components
Problanco Electronics
UHIMA Technologies
Allows for easy installation on PCBs, saving space and reducing assembly time.
Provides flexibility in connecting various components for different configurations.
Provides good electrical conductivity and resistance to corrosion.
Suitable for applications requiring high current output.
Efficiently steps down voltage from input to output, ideal for many power supply applications.
Switching Regulators & Controllers FDMF5068 attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Technique:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Equivalence Code:
Package Shape:
Peak Reflow Temperature (C):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
FDMF5068 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Material Chg 17/Nov/2022
PCN Assembly/Origin - FDMF50xx/FDMF3170 15/Feb/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Taitron Components
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
LM358AN
National Semiconductor
Diodes Incorporated
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
LM2841XMK-ADJL/NOPB
Texas Instruments
LM2841XMK-ADJL/NOPB by Texas Instruments is a switching regulator with a max output current of 0.3A and a control mode of current-mode PWM. It operates in automotive-grade temperatures, making it suitable for various applications requiring efficient power management in compact spaces. With a wide input voltage range from 4.5V to 42V, this device is ideal for use in automotive electronics and other industrial applications.
MC34063AP
Fairchild Semiconductor
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TPS61222DCKT
TPS61222DCKT by Texas Instruments is a switching regulator with max output current of 0.4A and max operating temp of 85°C. Ideal for battery charge control applications, it operates in hysteric current mode with boost switcher config and has a small outline package style.
LM2594DADJR2G
LM2594DADJR2G by Onsemi is a voltage-mode switching regulator with 0.5A output current, operating b/w -40 to 125°C. It has a buck-boost switcher config, supporting input voltages from 4.5V to 40V and output voltages ranging from 1.23V to 37V. Ideal for automotive applications due to its small outline package style and high max operating temperature of 125°C.
MC33063AD
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2576T-ADJ
Semtech
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-220; Package Shape: RECTANGULAR; Surface Mount: NO;
MC34063ABD-TR
MC34063ABD-TR by STMicroelectronics is a voltage-mode switching regulator with 1.5A output current, suitable for industrial applications. It operates b/w -40 to 85°C, with a max input voltage of 40V and min of 3V. The small outline package has dual terminals and Gull Wing form factor, making it ideal for compact designs.
LM2594MX-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ14201HTZE/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE; Terminal Pitch: 1.27 mm;
LM2675M-12
LM2675M-12 by Texas Instruments is a voltage-mode switching regulator with 1A output current and 260kHz max switching frequency. Ideal for automotive applications, it operates b/w -40 to 125°C, with a wide input range of 6.5V to 40V and an output voltage of 12V.
LM5118Q1MHX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR16006YDDCT
LMR16006YDDCT by Texas Instruments is a switching regulator with max output voltage of 55V, current-mode control, and max output current of 0.6A. Ideal for automotive applications due to its compact size (2.9mm x 1.6mm) and wide operating temperature range (-40°C to 125°C).
LM2596S-ADJ
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5575QMHX/NOPB
Switching Regulator or Controllers; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE, THIN PROFILE, SHRINK PITCH;
SG3525AP013TR
SG3525AP013TR by STMicroelectronics is a 16-terminal switching controller with PWM control mode, operating b/w 0-70°C. It has a max output current of 0.5A and supports a max switching frequency of 500kHz. Ideal for applications requiring voltage-mode control in small outline packages.
LT1616ES6#TRPBF
Analog Devices
LT1616ES6#TRPBF by Analog Devices is a small outline switching regulator with 6 terminals, operating at 0-70°C. It features a buck switcher configuration, pulse width modulation control technique, and can handle up to 0.85A output current. Ideal for applications requiring efficient power conversion in compact spaces.
TPS62110RSAT
TPS62110RSAT by Texas Instruments is a 16-terminal switching regulator with a voltage-mode control technique. It operates in an industrial temperature range from -40 to 85°C, supporting input voltages b/w 3.1V and 17V. With a max output current of 1.5A and a compact square chip carrier package style, it's ideal for various power management applications requiring efficient buck switching regulators.
LM5017SD/NOPB
LM5017SD/NOPB by Texas Instruments is a switching regulator with a max output voltage of 90V and max output current of 0.6A. Ideal for automotive applications, it operates b/w -40 to 125°C, with a switching frequency up to 1MHz.
LM5116MH/NOPB
LM5116MH/NOPB by Texas Instruments is a switching controller with 20 terminals, operating b/w -40 to 150°C. It supports a max output voltage of 80V and current up to 20A, making it ideal for automotive applications requiring high efficiency and precise current-mode control at frequencies up to 1MHz.
LT8608EMSE#PBF
LT8608EMSE#PBF by Analog Devices is a switching regulator with a max input voltage of 42V and a max switching frequency of 2200kHz. It operates in current-mode control and is suitable for applications requiring small outline, heat sink, and thin profile packages.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDMF2011
FDMF2011 by Onsemi is a 36-terminal switching controller with a max output current of 20A and a hybrid technology. With a wide input voltage range from 3V to 80V, it operates in automotive-grade temperatures (-40°C to 125°C) making it ideal for buck-boost applications at up to 200kHz frequency.
FDMF6821A
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 43; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
FDMF5076
FDMF5076 by Onsemi is a 24-terminal switching regulator chip carrier with a max output current of 35A and a max switching frequency of 1MHz. It is used in buck switcher configurations for high-power applications requiring efficient power management.
FDMF6824B
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 43; Package Code: BCC; Package Shape: SQUARE; Surface Mount: YES;
FDMF3035
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 33; Package Shape: SQUARE; Surface Mount: YES; Maximum Output Current: 50 A;
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 33; Package Shape: SQUARE; Surface Mount: YES; Width (mm): 5 mm;
FDMF5821
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 33; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
FDMF3039
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 26; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FDMF6821B
FDMF3037
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 33; Package Shape: SQUARE; Surface Mount: YES; Terminal Pitch: .5 mm;
FDMF3170
FDMF3170 by Onsemi is a 41-terminal switching regulator with a max output current of 70A and a max switching frequency of 1kHz. It operates in automotive-grade temperatures (-40 to 125°C) and uses pulse width modulation control technique for buck switcher configuration. Ideal for applications requiring high power efficiency in compact spaces.
FDMF6821C
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 40; Package Code: QCCN; Package Shape: SQUARE; Surface Mount: YES;
FDMF3172
FDMF3172 by Onsemi is a 39-terminal switching regulator with a max output current of 70A and a max switching frequency of 1kHz. It operates in automotive-grade temperatures (-40 to 125°C) and uses pulse width modulation for control. Ideal for applications requiring high power efficiency and compact design, such as automotive electronics or industrial automation systems.
FDMF3033
FDMF3180
SWITCHING REGULATOR; No. of Terminals: 41; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Finish: Matte Tin (Sn) - annealed; Moisture Sensitivity Level (MSL): 1;
FDMF301155
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 33; Package Shape: SQUARE; Surface Mount: YES; JESD-609 Code: e3;
FDMF3030
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved