Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DATA LINE FILTER;
Median Price
$0.060
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Digiode
$0.228
Vyrian
$0.240
Chip Stock
Corphita
$0.216
Corohmni
Native Components
$0.392
$0.377
Northwest PG Solutions
$0.431
$0.380
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
TANS Electronics
UHIMA Technologies
Data Line Filters EMI1051FCT5G attributes and parameters. Explore more Data Line Filters devices from Onsemi
Filter Type:
EMI1051FCT5G Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Itt Semiconductor
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
Grande Electronics
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Vishay Telefunken
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DLW21HN181SQ2L
Murata Manufacturing
Murata Manufacturing's DLW21HN181SQ2L is a data line filter with 2 functions, rated at 50V and 0.25A. It offers a max DC resistance of 0.5 ohm and an output impedance of 180 ohm, suitable for applications requiring noise suppression in data lines. With dimensions of L2.0xB1.2xH0.9 (mm), it is designed for surface mount installation in electronic devices operating b/w -40°C to 85°C.
BK1608LM252-T
Taiyo Yuden
BK1608LM252-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 1.1 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 2500 ohm and rated current of 0.2A.
BLM21AG121SN1D
Murata Manufacturing's BLM21AG121SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.09 ohm and output impedance of 120 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications due to its compact size and surface mounting type.
ACM7060-701-2PL-TL01
TDK
TDK's ACM7060-701-2PL-TL01 is a data line filter with 2 functions, rated at 80V and 4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 85 °C, and has a compact size of L7.0xB6.0xH3.5 mm. Ideal for applications requiring noise suppression in data lines.
IP4252CZ8-4-TTL,13
DATA LINE FILTER; Maximum DC Resistance: 48 ohm; Minimum Operating Temperature: -40 Cel; Width (mm): 1.35; Approvals (V): IEC; Height: .55 mm;
1206J0500104MXTE03
Knowles Precision Devices
1206J0500104MXTE03 by Knowles Precision Devices is a data line filter with 2 functions and a rated voltage of 50V. Featuring a min insulation resistance of 10000 Mohm, it is ideal for applications requiring feed through capacitor filters in temperatures ranging from -55 to 125 °C.
51-750-309
Spectrum Control
DATA LINE FILTER; Rated Current: 10 A; Mounting Type: THROUGH HOLE MOUNT; Dimensions: D4.95XH6.32 (mm)/D0.195XH0.249 (inch); Rated Voltage: 70 V; Height: 6.32 mm;
54-844-001
Api Technologies
54-844-001 by Api Technologies is a UL/CSA approved data line filter with a rated voltage of 600V. Featuring a feed through capacitor, it offers max insertion loss of 50dB and capacitance of 4700uF. Ideal for panel mounting applications, this filter operates at temperatures up to 125°C.
P0422NLT
Pulse Electronics
Pulse Electronics P0422NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 770uH. It operates b/w -40°C to 120°C, has a max DC resistance of 0.04 ohm, and rated current of 4.7A. Ideal for surface mount applications in automotive electronics due to its compact size (L19.56xB17.02xH9.91 mm).
PBY201209T-601Y-N
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
742792716
Wuerth Elektronik & Kg
Wurth Elektronik 742792716 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temp of 125°C and min of -55°C. With dimensions of L1.0xB0.5xH0.5 (mm), it's ideal for surface mount applications requiring output impedance of 60 ohm and rated current of 0.3A.
744823220
Wurth Elektronik 744823220 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 20000uH. It operates b/w -40 to 125 °C and has dimensions of L23.0xB13.0xH28.0 mm. Ideal for applications requiring noise suppression in data lines at a max current of 1.5A.
MI0603L301R-10
Steward
MMZ1608B102CTD25
TDK's MMZ1608B102CTD25 is a chip bead data line filter with 1 function. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter is commonly used in automotive applications due to its AEC-Q200 screening level.
LI0805H121R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
4700-008LF
Cts
Cts 4700-008LF is a Data Line Filter with 100V rated voltage, 0.1uH inductance, and 70dB max insertion loss. Ideal for applications requiring high insulation resistance, such as data transmission systems or electronic devices. Dimensions: L8XB2.29XH2.29 (mm), Mounting Type: SURFACE MOUNT.
FBMJ1608HS220NTR
Taiyo Yuden's FBMJ1608HS220NTR is a chip bead data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. Featuring a max operating temperature of 125°C and rated current of 7.5A, it offers a min frequency of 100MHz and max DC resistance of 0.004 ohm, making it ideal for noise suppression in electronic circuits.
CM1422-03CP
California Micro Devices
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Manufacturer Series: CM1422; Capacitance: 15 uF; Dimensions: L4.045XB1.503XH0.714 (mm)/L0.159XB0.059XH0.028 (inch);
BLM15PX331SN1D
Murata Manufacturing's BLM15PX331SN1D is a FERRITE CHIP data line filter with dimensions of L1.0xB0.5xH0.5 (mm). It offers a max DC resistance of 0.15 ohm and an output impedance of 330 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference efficiently.
744226
Wurth Elektronik 744226 is a UL-approved data line filter with 2 functions, rated at 80V. It has inductance of 10uH, max DC resistance of 0.08 ohm, and output impedance of 920 OHM. This surface mount filter operates b/w -40 to 125 °C and is ideal for applications requiring noise suppression in data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EMI103T-RC
Bourns
Bourns EMI103T-RC is a 3-terminal data line filter with 10,000 Mohm insulation resistance and 50V rated voltage. It offers 25dB attenuation at max frequency of 15MHz, making it ideal for noise suppression in electronic circuits. With dimensions of L9.0xB3.2xH8.0 mm, this through-hole mount filter has a rated current of 5A and capacitance of 10,000uF.
EMI101T-RC
DATA LINE FILTER; Maximum DC Resistance: .05 ohm; Rated Current: 5 A; Minimum Insulation Resistance: 10000 Mohm; Additional Features: T-TYPE CIRCUIT; Maximum Attenuation Frequency: 350 MHz;
EMI102T-RC
DATA LINE FILTER; Maximum DC Resistance: .05 ohm; Rated Current: 5 A; No. of Terminals: 3; No. of Functions: 1; Width (mm): 3.2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved