Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DM2023-1JL3 by Onsemi is a 2-row display with 20 characters per row, featuring a 5x8 Dot character font type. With dimensions of 116mm x 32mm x 13mm, it has a viewing area height of 16mm and operates b/w temperatures of 0 °C to 50°C. Ideal for applications requiring compact displays with clear visibility at nominal voltage of 5V.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Corphita
Northwest PG Solutions
Corohmni
Native Components
UHIMA Technologies
Problanco Electronics
The slim design of the display makes it suitable for compact spaces and easy to integrate into various products.
Having 2 rows per display allows for better organization and display of information, making it more user-friendly.
With a maximum operating temperature of 50 °C, this display can withstand higher temperatures without performance issues.
The compact height of the display makes it suitable for applications where space is limited.
The display can operate efficiently even in lower temperatures, making it versatile for various environments.
With 20 characters per row, this display can show more information at once, improving readability and efficiency.
The 5 V supply voltage is common and easily available, making it convenient for integration into different systems.
The 5x8 dot font type allows for clear and easily readable characters on the display, enhancing user experience.
The display height of 4.85 mm provides good visibility while keeping the overall size compact.
The 116 mm length makes the display suitable for a variety of applications without taking up too much space.
The viewing area height of 16 mm ensures that information displayed is clearly visible and easy to read.
Displays & Monitors DM2023-1JL3 attributes and parameters. Explore more Displays & Monitors devices from Onsemi
Character Font Type:
Characters Per Row:
Display Height:
Maximum Operating Temperature:
Minimum Operating Temperature:
Depth:
Height:
Length:
Rows Per Display:
Sub-Category:
Nominal Supply Voltage:
Viewing Area Height:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
Formosa Microsemi
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
1N4148WS
Rugao Dachang Electronic
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LCM5022
LCM5022 by Onsemi is a 2-row display with 16 characters per row, featuring a character font type of 5x7 + CSR. With a height of 36mm and depth of 12mm, it operates b/w temperatures of 0 to 50 °C. Ideal for applications requiring a nominal voltage of 5V, such as industrial displays and monitoring systems.
ALP024AGX
ALP024AGX by Onsemi is a 521x218 pixel display with dimensions of 16x15x6 mm. It operates b/w -10 °C to 60°C, powered by a 12V supply. Ideal for applications requiring compact displays with high resolution and temperature tolerance.
LTA057A345F
Toshiba
Displays; Viewing Area Height: 86 mm; Viewing Area Length: 115 mm; Depth: 7.8 mm; Horizontal Pixel Count: 320 Pixel; Minimum Operating Temperature: -20 Cel;
LT070AA32600
Displays; Viewing Area Height: 91 mm; Horizontal Pixel Count: 800 Pixel; Depth: 8.7 mm; Pixel Count (Vertical): 480 Pixel; Height: 110 mm;
NL8060BC31-09
Renesas Electronics
Displays; Pixel Count (Vertical): 600 Pixel; Horizontal Pixel Count: 800 Pixel; Viewing Area Height: 184 mm; Viewing Area Length: 246 mm; Minimum Operating Temperature: 0 Cel;
DM2023-7AL3
DM2023-7AL3 by Onsemi is a 2-row display with 20 characters per row, featuring a 5x8 Dot character font type. With dimensions of 116mm x 32mm x 13mm, it operates b/w temperatures of 0 °C to 50°C. Ideal for applications requiring a compact display solution with a nominal voltage of 5V.
NL6448AC30-12
Displays; Depth: 10 mm; Viewing Area Height: 144 mm; Horizontal Pixel Count: 640 Pixel; Viewing Area Length: 192 mm; Height: 179 mm;
NL6448BC33-46D
Displays; Depth: 11 mm; Length: 243 mm; Nominal Supply Voltage: 3.3 V; Height: 185 mm; Pixel Count (Vertical): 480 Pixel;
NHD-2.4-240320SF-CTXI#-F1
Newhaven Display International
Displays;
DLG1414
Infineon Technologies
Displays; Height: 20 mm; Characters Per Row: 4; Rows Per Display: 1; Length: 18 mm; Display Height: 3.68 mm;
LCM5159
LCM5159 by Onsemi is a 4-row display with 20 characters per row, featuring a character font type of 5x7 + CSR. With a height of 60mm and depth of 10mm, it operates b/w temperatures of 0-40 °C. Ideal for applications requiring compact displays with clear visibility and easy integration at a nominal voltage of 5V.
LCM5112
LCM5112 by Onsemi is a 2-row display with 16 characters per row, featuring a height of 36mm and depth of 12mm. Operating b/w 0-40 °C, it has a supply voltage of 5V and uses a 5x7 + CSR font type. Ideal for applications requiring compact displays with clear visibility in various temperature conditions.
CU16025-UW6J
Noritake Itron
DOT MATRIX VACUUM FLUORESCENT CHARACTER DISPLAY MODULE;
LTM08C351R
Displays; Height: 149.5 mm; Length: 199.5 mm; Maximum Operating Temperature: 60 Cel; Minimum Operating Temperature: -10 Cel; Nominal Supply Voltage: 3.3 V;
T-55265GD057J-LW-ACN
Optrex
EADOGM132W-5
Electronic Assembly
EADOGM132W-5 by Electronic Assembly is a 132x32 pixel display with 3.3V supply voltage, ideal for applications requiring compact design. With dimensions of 55x27x2 mm and operating temperature range of -20 to 70°C, it offers a crisp white display in a viewing area of 48x13 mm.
LCM522
LCM522 by Onsemi is a 2-row display with 16 characters per row, featuring a height of 36mm and depth of 12mm. With a nominal voltage of 5V, it operates b/w temperatures of 0-50 °C. Ideal for applications requiring compact displays with clear visibility and low power consumption.
LCM5114
LCM5114 by Onsemi is a 4-row display with 16 characters per row, featuring a height of 60mm and depth of 14mm. Operating b/w 0-40 °C, it has a character font type of 5x7 + CSR and nominal voltage of 5V. Ideal for applications requiring compact displays with clear visibility in various temperature conditions.
EADOGM081W-A
EADOGM081W-A by Electronic Assembly is a 8x2 character display with 11.97mm height, ideal for applications requiring compact size. With a depth of 2mm and operating temperatures from -20°C to 70°C, it's suitable for diverse environments. Nominal voltage of 3.3V ensures efficient power usage in various projects.
EALED55X31-G
EALED55X31-G by Electronic Assembly is a 55x31 mm display with 132x32 pixels. It operates b/w -20°C to 70°C, ideal for industrial applications. With a nominal voltage of 3.3V, it offers a viewing area of 52x16 mm in green/yellow color for clear visibility.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DM2023-1HL3
Displays; Maximum Operating Temperature: 50 Cel; Rows Per Display: 2; Nominal Supply Voltage: 5 V; Minimum Operating Temperature: 0 Cel; Display Height: 4.85 mm;
DM2023-0SL3
Displays; Viewing Area Height: 16 mm; Character Font Type: 5x8 Dot; Characters Per Row: 20; Rows Per Display: 2; Nominal Supply Voltage: 5 V;
DM2023-0GL3
Displays; Depth: 9 mm; Character Font Type: 5x8 Dot; Characters Per Row: 20; Viewing Area Height: 16 mm; Maximum Operating Temperature: 50 Cel;
DM2023-1GL3
Displays; Rows Per Display: 2; Maximum Operating Temperature: 50 Cel; Viewing Area Height: 16 mm; Characters Per Row: 20; Minimum Operating Temperature: 0 Cel;
DM2023-1AL3
Displays; Characters Per Row: 20; Maximum Operating Temperature: 50 Cel; Display Height: 4.85 mm; Height: 32 mm; Nominal Supply Voltage: 5 V;
DM2023-0JL3
Displays; Rows Per Display: 2; Height: 32 mm; Maximum Operating Temperature: 50 Cel; Character Font Type: 5x8 Dot; Minimum Operating Temperature: 0 Cel;
DM2023-1HL7
Displays; Viewing Area Height: 16 mm; Display Height: 4.85 mm; Rows Per Display: 2; Minimum Operating Temperature: 0 Cel; Characters Per Row: 20;
DM2023-0AL7
Displays; Length: 116 mm; Minimum Operating Temperature: 0 Cel; Rows Per Display: 2; Characters Per Row: 20; Nominal Supply Voltage: 5 V;
DM2023-0SL7
Displays; Depth: 9 mm; Display Height: 4.85 mm; Nominal Supply Voltage: 5 V; Length: 116 mm; Rows Per Display: 2;
DM2023-0GL7
Displays; Nominal Supply Voltage: 5 V; Viewing Area Height: 16 mm; Character Font Type: 5x8 Dot; Characters Per Row: 20; Depth: 9 mm;
DM2023-1BL7
Displays; Length: 116 mm; Depth: 13 mm; Height: 32 mm; Maximum Operating Temperature: 50 Cel; Characters Per Row: 20;
DM2023-1AL7
Displays; Display Height: 4.85 mm; Rows Per Display: 2; Height: 32 mm; Length: 116 mm; Maximum Operating Temperature: 50 Cel;
DM2023-0HL7
Displays; Minimum Operating Temperature: 0 Cel; Depth: 13 mm; Viewing Area Height: 16 mm; Length: 116 mm; Display Height: 4.85 mm;
DM2023-1GL7
Displays; Characters Per Row: 20; Maximum Operating Temperature: 50 Cel; Height: 32 mm; Rows Per Display: 2; Minimum Operating Temperature: 0 Cel;
DM2023-0BL7
Displays; Viewing Area Height: 16 mm; Height: 32 mm; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 50 Cel; Length: 116 mm;
DM2023-0JL7
Displays; Length: 116 mm; Depth: 13 mm; Display Height: 4.85 mm; Characters Per Row: 20; Maximum Operating Temperature: 50 Cel;
DM2023-0AL3
Displays; Minimum Operating Temperature: 0 Cel; Characters Per Row: 20; Depth: 13 mm; Height: 32 mm; Length: 116 mm;
DM2023-0BL3
Displays; Character Font Type: 5x8 Dot; Depth: 13 mm; Viewing Area Height: 16 mm; Length: 116 mm; Minimum Operating Temperature: 0 Cel;
DM2023-0HL3
Displays; Length: 116 mm; Depth: 13 mm; Rows Per Display: 2; Display Height: 4.85 mm; Character Font Type: 5x8 Dot;
DM2023-1BL3
Displays; Display Height: 4.85 mm; Characters Per Row: 20; Nominal Supply Voltage: 5 V; Height: 32 mm; Maximum Operating Temperature: 50 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved