Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi DM2023-0BL7 display has 2 rows with 20 characters each in a 5x8 Dot font type. With a height of 4.85mm and viewing area of 16mm, it operates b/w 0 to 50 °C. Ideal for applications requiring compact displays with clear character visibility at nominal voltage of 5V.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$0.113
$0.109
Northwest PG Solutions
$0.125
$0.110
SupplyDigital Components
Problanco Electronics
Corphita
TANS Electronics
UHIMA Technologies
Corohmni
Kulean Microsystems
Slim design makes this display easy to integrate into various applications without taking up much space.
Having multiple rows allows for displaying more information at once, increasing efficiency.
Wide operating temperature range ensures the display can function in various environments without overheating.
Compact height makes the display suitable for installations where space is limited.
Low minimum operating temperature ensures the display can be used in colder environments without issues.
Higher number of characters per row allows for displaying more detailed information, increasing usefulness.
Standard supply voltage ensures compatibility with most systems and ease of integration.
Clear and easy-to-read font type enhances visibility and readability of displayed information.
Optimal display height for clear viewing of characters without being too small or too large.
A suitable length for accommodating a sufficient number of characters per row while keeping the display compact.
Adequate viewing area height ensures that characters are clearly displayed and easily readable by users.
Displays & Monitors DM2023-0BL7 attributes and parameters. Explore more Displays & Monitors devices from Onsemi
Character Font Type:
Characters Per Row:
Display Height:
Maximum Operating Temperature:
Minimum Operating Temperature:
Depth:
Height:
Length:
Rows Per Display:
Sub-Category:
Nominal Supply Voltage:
Viewing Area Height:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1552200253
Molex
WIRE AND CABLE;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
Baneasa S A
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LQ121S1LG81
Sharp Corporation
Sharp Corporation's LQ121S1LG81 display boasts 800x600 resolution, 9.1mm depth, and operates b/w -30°C to 80°C. Ideal for industrial applications requiring a compact 276x209 mm screen with a nominal voltage of 3.3V.
ALP239CCX
ALP239CCX by Onsemi is a 557x234 pixel display with dimensions of 48x42x5.5 mm. Operating b/w -10 °C to 60°C, it requires a nominal voltage of 12V. Ideal for applications requiring compact and high-resolution displays in various temperature conditions.
NL6448BC26-03
Renesas Electronics
Displays; Nominal Supply Voltage: 3.3 V; Depth: 12 mm; Horizontal Pixel Count: 640 Pixel; Pixel Count (Vertical): 480 Pixel; Viewing Area Length: 171 mm;
NL128102BC23-03
Displays; Horizontal Pixel Count: 1280 Pixel; Maximum Operating Temperature: 50 Cel; Height: 269 mm; Viewing Area Length: 305 mm; Depth: 17.9 mm;
NHD-C12864A1Z-FS(RGB)-FBW-HT1
Newhaven Display International
GRAPHIC DOT MATRIX LCD DISPLAY;
NL6448CC33-30W
Displays; Nominal Supply Voltage: 3.3 V; Height: 188 mm; Pixel Count (Vertical): 480 Pixel; Viewing Area Height: 158 mm; Viewing Area Length: 211 mm;
SCDQ5541R
Displays;
NL10276AC28-02L
Displays; Height: 255 mm; Minimum Operating Temperature: 0 Cel; Horizontal Pixel Count: 1024 Pixel; Maximum Operating Temperature: 50 Cel; Viewing Area Length: 285 mm;
LCM5423-22A
LCM5423-22A by Onsemi is a 640x200 pixel display with blue color at 5V supply voltage. With dimensions of 252x104x12 mm, it operates b/w 0-40 °C and offers a viewing area of 216x84 mm. Ideal for applications requiring high-resolution displays in various environments.
DLO3416
Displays; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Depth: 9 mm; Height: 20 mm; Viewing Area Height: 7 mm;
DG24320C5PC
DG24320C5PC by Onsemi is a 320x240 pixel display with dimensions of 162x128x12 mm. It operates b/w 0-40 °C, with a supply voltage of 26V. Ideal for applications requiring high-resolution visuals in displays and monitors.
LTS180S1-HF1
Samsung
Displays; Nominal Supply Voltage: 2.78 V; Horizontal Pixel Count: 128 Pixel; Depth: 3.5 mm; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 60 Cel;
IS01EBFRGB
Nkk Switches
IS01EBFRGB by Nkk Switches is a 64x32 pixel display with red color at 5V. With dimensions of 17.8mm x 17.2mm x 9.9mm, it operates b/w -15°C to 50°C making it suitable for various applications requiring compact and temperature-resistant displays like wearables or IoT devices.
LTA057A343F
Displays; Nominal Supply Voltage: 3.3 V; Height: 104.6 mm; Minimum Operating Temperature: -20 Cel; Pixel Count (Vertical): 240 Pixel; Viewing Area Height: 86 mm;
DM1620-7BL3
The Onsemi DM1620-7BL3 display has 2 rows with 16 characters each in a 5x8 Dot font type. With a height of 33mm and depth of 13mm, it operates b/w 0 to 50 °C. Ideal for applications requiring compact displays with clear visibility like industrial control panels.
ALP215
ALP215 by Onsemi is a 521x218 pixel display with dimensions of 43x36x3 mm. It operates b/w -10 °C to 60°C, making it suitable for various applications requiring a compact and high-resolution display, such as portable electronic devices and IoT products.
DM2023-7GL3
The Onsemi DM2023-7GL3 display has 2 rows with 20 characters per row, using a 5x8 Dot font type. With a height of 32mm and depth of 9mm, it operates b/w 0-50 °C. Ideal for applications requiring compact displays with clear visibility in various environments.
LCM551-32E
The Onsemi LCM551-32E is a 120x32 pixel display with dimensions of 152x56x15 mm. Operating temperature range is 0-40 °C, powered by 5V. Ideal for applications requiring compact displays with clear visibility and low power consumption.
SCDQ5542P
TM121SV-02L07
TM121SV-02L07 by Onsemi is a 800x600 pixel display with 5.7mm depth and operates b/w 0-50 °C. Ideal for applications requiring a 3.3V supply, such as industrial monitors or digital signage due to its compact size and high resolution capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DM2023-1HL3
Displays; Maximum Operating Temperature: 50 Cel; Rows Per Display: 2; Nominal Supply Voltage: 5 V; Minimum Operating Temperature: 0 Cel; Display Height: 4.85 mm;
DM2023-0SL3
Displays; Viewing Area Height: 16 mm; Character Font Type: 5x8 Dot; Characters Per Row: 20; Rows Per Display: 2; Nominal Supply Voltage: 5 V;
DM2023-0GL3
Displays; Depth: 9 mm; Character Font Type: 5x8 Dot; Characters Per Row: 20; Viewing Area Height: 16 mm; Maximum Operating Temperature: 50 Cel;
DM2023-1GL3
Displays; Rows Per Display: 2; Maximum Operating Temperature: 50 Cel; Viewing Area Height: 16 mm; Characters Per Row: 20; Minimum Operating Temperature: 0 Cel;
DM2023-1AL3
Displays; Characters Per Row: 20; Maximum Operating Temperature: 50 Cel; Display Height: 4.85 mm; Height: 32 mm; Nominal Supply Voltage: 5 V;
DM2023-0JL3
Displays; Rows Per Display: 2; Height: 32 mm; Maximum Operating Temperature: 50 Cel; Character Font Type: 5x8 Dot; Minimum Operating Temperature: 0 Cel;
DM2023-1HL7
Displays; Viewing Area Height: 16 mm; Display Height: 4.85 mm; Rows Per Display: 2; Minimum Operating Temperature: 0 Cel; Characters Per Row: 20;
DM2023-0AL7
Displays; Length: 116 mm; Minimum Operating Temperature: 0 Cel; Rows Per Display: 2; Characters Per Row: 20; Nominal Supply Voltage: 5 V;
DM2023-0SL7
Displays; Depth: 9 mm; Display Height: 4.85 mm; Nominal Supply Voltage: 5 V; Length: 116 mm; Rows Per Display: 2;
DM2023-0GL7
Displays; Nominal Supply Voltage: 5 V; Viewing Area Height: 16 mm; Character Font Type: 5x8 Dot; Characters Per Row: 20; Depth: 9 mm;
DM2023-1BL7
Displays; Length: 116 mm; Depth: 13 mm; Height: 32 mm; Maximum Operating Temperature: 50 Cel; Characters Per Row: 20;
DM2023-1AL7
Displays; Display Height: 4.85 mm; Rows Per Display: 2; Height: 32 mm; Length: 116 mm; Maximum Operating Temperature: 50 Cel;
DM2023-0HL7
Displays; Minimum Operating Temperature: 0 Cel; Depth: 13 mm; Viewing Area Height: 16 mm; Length: 116 mm; Display Height: 4.85 mm;
DM2023-1GL7
Displays; Characters Per Row: 20; Maximum Operating Temperature: 50 Cel; Height: 32 mm; Rows Per Display: 2; Minimum Operating Temperature: 0 Cel;
DM2023-0JL7
Displays; Length: 116 mm; Depth: 13 mm; Display Height: 4.85 mm; Characters Per Row: 20; Maximum Operating Temperature: 50 Cel;
DM2023-0AL3
Displays; Minimum Operating Temperature: 0 Cel; Characters Per Row: 20; Depth: 13 mm; Height: 32 mm; Length: 116 mm;
DM2023-0BL3
Displays; Character Font Type: 5x8 Dot; Depth: 13 mm; Viewing Area Height: 16 mm; Length: 116 mm; Minimum Operating Temperature: 0 Cel;
DM2023-0HL3
Displays; Length: 116 mm; Depth: 13 mm; Rows Per Display: 2; Display Height: 4.85 mm; Character Font Type: 5x8 Dot;
DM2023-1BL3
Displays; Display Height: 4.85 mm; Characters Per Row: 20; Nominal Supply Voltage: 5 V; Height: 32 mm; Maximum Operating Temperature: 50 Cel;
DM2023-0BL7
Sanyo Electric
Displays; Length: 116 mm; Display Height: 4.85 mm; Rows Per Display: 2; Characters Per Row: 20; Viewing Area Height: 16 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved