Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Onsemi CM6400 is a Data Line Filter with 24 terminals, rated at 2.5V. It offers an inductance of 0.024uH and capacitance of 17.8uF, suitable for applications requiring filtering in data lines. With a compact size of 2.06mm x 2.06mm x 0.63mm, it operates b/w -40 °C to 85°C making it ideal for surface mount installations.
Median Price
$2.200
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Symmetry
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Digiode
$2.090
Vyrian
Corphita
$1.980
Corohmni
Authorized Procurement Solutions
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Northwest PG Solutions
$3.234
UHIMA Technologies
Native Components
$3.201
Low operating voltage ensures compatibility with various devices and applications.
Sufficient number of terminals for connecting multiple data lines, making it versatile for different setups.
Specifically designed for filtering data lines, ensuring clean and interference-free signal transmission.
High maximum operating temperature allows for reliable performance even in challenging environments.
Wide range of operating temperatures makes it suitable for use in both cold and hot conditions.
Low inductance ensures minimal signal distortion and loss, maintaining data integrity.
Compact width enables space-efficient mounting on PCBs, ideal for devices with limited space.
Low resistance helps in maintaining signal integrity and reducing power loss.
Compact length contributes to the overall small form factor of the product.
TR packing method ensures safe transportation and handling of the product.
Surface mount design simplifies installation and integration into electronic devices.
Low profile height makes it suitable for thin devices and compact designs.
High capacitance helps in filtering out unwanted noise and interference from data lines.
Data Line Filters CM6400 attributes and parameters. Explore more Data Line Filters devices from Onsemi
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Voltage:
Width (mm):
CM6400 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
NSN
5210-01-192-9432, 5210011929432, 5325-99-209-8445, 5325992098445
NIIN
011929432, 992098445
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
Semiconductor Technology
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
Signetics
CL31B104KBCNNNC
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
BNX026H01L
Murata Manufacturing
Murata Manufacturing's BNX026H01L is a 50V data line filter with AEC-Q200 screening. It features 4 terminals, rated for 15A current, and has an output impedance of 50 ohms. This surface mount filter operates b/w -55°C to 125°C, making it ideal for automotive and industrial applications.
MMZ2012Y202BT
TDK
The TDK MMZ2012Y202BT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.5 ohm and output impedance of 2000 ohm, making it ideal for surface mount applications requiring effective filtering in electronic circuits.
ACM7060-301-2PL-TL01
ACM7060-301-2PL-TL01 by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for surface mount applications requiring output impedance of 300 ohm.
FCFBMH4532HM681-T
Taiyo Yuden
Taiyo Yuden's FCFBMH4532HM681-T is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 680 ohm and operates b/w -40°C to 85°C. Ideal for surface mount applications requiring effective noise filtering in compact spaces.
BLM15BD601SN1D
Murata's BLM15BD601SN1D is a 0402 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.65 ohm and output impedance of 600 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
LI0805H151R-10
Laird Technologies
LI0805H151R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a max frequency of 1000 MHz and output impedance of 150 OHM. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.8 A and is designed for frequencies ranging from 25 MHz to 1000 MHz.
BLM21PG600SN1J
Murata Manufacturing's BLM21PG600SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for data line filtering applications, this ferrite chip is rated for a current of 3A and features tin terminal finish in surface mount packaging.
BLM15AX221SN1D
BLM15AX221SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L1.0XB0.5XH0.5 (mm) and is commonly used in surface mount applications for impedance matching and noise suppression in data lines.
BLM31SN500SH1L
Murata Manufacturing's BLM31SN500SH1L is a FERRITE CHIP filter with 2 terminals, AEC-Q200 compliant. It operates b/w -55°C to 125°C, has a DC resistance of 0.0016 ohm, and rated current of 12A. Ideal for data line filtering applications with an output impedance of 50 OHM.
BK1005HS102-T
BK1005HS102-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers a max operating temperature of 125°C and a min frequency of 100 MHz. With dimensions of L1.0xB0.5xH0.5 (mm), this filter has a max DC resistance of 0.58 ohm and an output impedance of 1000 OHM, making it suitable for high-frequency filtering tasks in electronic circuits.
742792662
Wuerth Elektronik & Kg
Wurth Elektronik 742792662 is a FERRITE CHIP data line filter with max operating temp of 125°C and min of -55°C. It has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. With an output impedance of 1000Ω, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
ILHB0603ER121V
Vishay Intertechnology
Vishay Intertechnology's ILHB0603ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C and has a DC resistance of 0.1 ohm. Ideal for applications requiring a 120 OHM output impedance at frequencies up to 100 MHz, this chip is compact at L1.6xB0.8xH0.8 mm and mounts easily on surfaces.
7427927160
Wurth Elektronik 7427927160 is a FERRITE CHIP data line filter with 2 terminals, rated at 0.4A. It operates b/w -55 to 125 °C and has a max DC resistance of 0.3 ohm. Suitable for surface mount applications, it offers an output impedance of 60 OHM and comes in dimensions L1.0xB0.5xH0.5 mm, ideal for noise suppression in electronic circuits.
744235801
Wurth Elektronik 744235801 is a Data Line Filter with 2 functions, AEC-Q200 screening. Rated for 60V, it has an inductance of 1.3uH and max DC resistance of 0.12 ohm. Ideal for applications requiring surface mount filters with dimensions D4.53.2XH2.8mm and rated current of 1A.
7448229004
7448229004 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 350uH, making it suitable for applications requiring noise suppression in data lines.
ACP3225-102-2P-T000
TDK ACP3225-102-2P-T000 is a FERRITE CHIP filter with 2 functions, rated at 60V and 1.5A. With dimensions of L3.2xB2.5xH1.9 (mm), it's ideal for data line filtering applications requiring high impedance and insulation resistance up to 10 Mohm. Operating b/w -40°C to 85°C, this surface mount device offers low DC resistance of 0.1 ohm for efficient performance in various electronic systems.
503-2
West Coast Magnetics
Data Line Filters;
ACM9070-701-2PL-TL01
ACM9070-701-2PL-TL01 by TDK is a FERRITE CHIP data line filter with 2 functions, rated voltage of 80V, and 10 Mohm min insulation resistance. It operates b/w -40 to 85 °C, has 4 terminals, and dimensions of L9.0XB7.0XH4.5 mm. Ideal for applications requiring high impedance filtering in compact spaces.
P0420NLT
Pulse Electronics
Pulse Electronics P0420NLT is a data line filter with 2 functions, AEC-Q200 screening. It has inductance of 1320uH, max operating temp of 120°C, and rated current of 3.3A. Ideal for automotive applications due to its surface mounting type and compact dimensions (L19.56xB17.02xH9.91mm).
NUF4001MUT2G
NUF4001MUT2G by Onsemi is a 4-function data line filter with 25 dB attenuation at 800 MHz. It operates b/w -40 to 85 °C and has a max DC resistance of 115 ohm. Ideal for applications requiring noise filtering in data lines, it comes in a compact surface mount package measuring L1.8xB1.2xH0.55 mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CM6400A
DATA LINE FILTER; Maximum DC Resistance: 150 ohm; No. of Functions: 10; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 85 Cel;
CM6407
DATA LINE FILTER; Maximum DC Resistance: 150 ohm; Length: 1.96 mm; Packing Method: TR; Width (mm): 1.56; Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved