Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Intertechnology's ILHB0603RK600V is a FERRITE CHIP filter with 2 terminals, 60 OHM output impedance, and 2A rated current. Operating b/w -55°C to 125°C, it has a max DC resistance of 0.1 ohm. Ideal for data line filtering in compact surface mount applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
PC Components Company LLC
Bristol Electronics
Nova Conductors
Ampacity Inc.
$1.400
Semicontronic
$4.400
$4.290
$4.268
AZTECH Wire
$18.211
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Having 2 terminals makes this data line filter easy to install and connect.
Ferrite chip filters are known for their high efficiency in reducing electromagnetic interference, making this product reliable for maintaining signal quality.
With a high maximum operating temperature, this data line filter can withstand heat and maintain performance in various environments.
The wide range of minimum operating temperature ensures this filter can function in cold conditions without any issues.
Low DC resistance ensures minimal power loss across the filter, leading to efficient operation.
Compact size of 1.6mm makes this filter suitable for applications where space is limited.
Output impedance of 60 ohm helps in matching impedance levels and reducing signal reflection, ensuring optimal signal transmission.
Surface mount design makes installation hassle-free and PCB integration convenient.
The small dimensions of this filter make it versatile for use in various electronic devices without taking up much space.
With a rated current of 2 A, this filter can handle moderate to high current loads effectively, ensuring stable performance.
Low height of 0.8mm allows for installation in compact spaces without compromising on functionality.
Data Line Filters ILHB0603RK600V attributes and parameters. Explore more Data Line Filters devices from Vishay Intertechnology
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Rated Current:
ILHB0603RK600V Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitronic Enterprise
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LL4148-GS08
Vishay Telefunken
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2425-001-X5U0-102AALF
Cts
Cts 2425-001-X5U0-102AALF is a FEED THROUGH CAPACITOR with 1000uF capacitance, 100V rated voltage, and 2 terminals. It operates b/w -55 to 125 °C and has a min insulation resistance of 10,000 Mohm. Ideal for PCB mounting in data line filtering applications.
BLM18HE152SN1D
Murata Manufacturing
BLM18HE152SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. It offers a DC resistance of 0.5 ohm, output impedance of 1500 ohm, and rated current of 0.4 A. Ideal for applications requiring surface mount filters in the frequency range of 100-1000 MHz.
4400-099LF
4400-099LF by Cts is a Data Line Filter with 20000 Mohm Min Insulation Resistance, 50 V Rated Voltage, and FEED THROUGH CAPACITOR filter type. It operates b/w -55 to 125 °C, has a Max Insertion Loss of 70 dB, and a Capacitance of 50000 uF. Ideal for panel mounting applications requiring up to 10 A rated current.
744235110
Wuerth Elektronik & Kg
Wurth Elektronik 744235110 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 60V, inductance of 11uH, and max operating temp of 125°C. Ideal for applications requiring noise suppression in automotive electronics.
ILHB1206ER121V
Vishay Intertechnology
Vishay Intertechnology's ILHB1206ER121V is a 120 OHM FERRITE CHIP filter with 2 terminals, rated for 6A current. Ideal for data line filtering applications, it operates b/w -55 to 125 °C and has a DC resistance of 0.02 ohm. Measuring L3.2XB1.6XH1.1 (mm), it is designed for surface mount installation at frequencies up to 100 MHz.
ACM2012-201-2P-T002
TDK
ACM2012-201-2P-T002 by TDK is a FERRITE CHIP data line filter with 2 functions. It has a rated voltage of 50V and can operate in temperatures ranging from -40 to 85°C. It is suitable for surface mount applications requiring a compact size (L2.0XB1.2XH1.3 mm) and offers a min insulation resistance of 10 Mohm.
ACT1210L-201-2P-TL00
The TDK ACT1210L-201-2P-TL00 is a data line filter with 2 functions, rated at 80V and -40 to 125°C operating temperature range. It has 4 terminals, insulation resistance of 10 Mohm, and DC resistance of 5.5 ohm. Ideal for automotive applications due to AEC-Q200 screening level compliance.
DLW5BTN102SQ2L
Murata's DLW5BTN102SQ2L is a Data Line Filter with 10 Mohm Insulation Resistance, 50V Rated Voltage, and 2A Rated Current. It has 4 terminals, operates b/w -40 to 85 °C, and offers an output impedance of 1000 ohm. Ideal for applications requiring noise suppression in data lines.
MPZ2012S300AT000
TDK's MPZ2012S300AT000 is a chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.01 ohm and output impedance of 30 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
NFL21SP206X1C7D
Murata Manufacturing's NFL21SP206X1C7D is a 3-terminal data line filter with 1000 Mohm insulation resistance and 16V rated voltage. With inductance of 0.7uH, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring capacitance of 240uF.
BK1608HS220-T
Taiyo Yuden
BK1608HS220-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, ideal for applications requiring noise suppression. With a max operating temperature of 125°C and min frequency of 100 MHz, it offers low DC resistance of 0.05 ohm. This ferrite chip filter has dimensions of L1.6xB0.8xH0.8 (mm) and is suitable for surface mounting type in tape and reel packing method.
74279279
Wurth Elektronik 74279279 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, has a DC resistance of 1 ohm, and an output impedance of 600 OHM at frequencies ranging from 100 MHz to 180 MHz. This surface mount component measures L1.0XB0.5XH0.5 (mm) and is packed in TAPE AND REEL format for easy handling during assembly.
NUF8402MNT4G
NUF8402MNT4G by Onsemi is a data line filter with 8 functions, rated at 5V. It offers 35dB attenuation at 800MHz, operates b/w -40 to 85°C, and has a max DC resistance of 115 ohm. Commonly used in IEC-approved applications for noise filtering in data lines.
ACT45B-510-2P
ACT45B-510-2P by TDK is a data line filter with a rated voltage of 50V and a max operating temperature of 150°C. It has a min insulation resistance of 10 Mohm and is suitable for surface mount applications.
EMIF06-MSD02N16
STMicroelectronics' EMIF06-MSD02N16 is a 16-terminal data line filter with max temp of 85°C and min temp of -30°C. It features nickel palladium gold finish, surface mounting type, and compact dimensions (L3.55xB1.25xH0.55 mm). Ideal for applications requiring effective filtering in compact spaces.
744242471
Wurth Elektronik 744242471 is a Data Line Filter with UL approval, rated at 80V. It features 2 functions, inductance of 470uH, and max operating temp of 125°C. Ideal for applications requiring filtering in data lines with surface mounting type.
BLM21BD222TN1D
Murata's BLM21BD222TN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125°C. With a DC resistance of 0.6 ohm and output impedance of 2200 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
MCZ1210AH900L2TA0G
MCZ1210AH900L2TA0G by TDK is a 4-terminal data line filter with 10 Mohm insulation resistance and 5V rated voltage. With a max operating temperature of 85°C, it is ideal for applications requiring high output impedance such as data transmission systems.
NFW31SP106X1E4L
Murata Manufacturing's NFW31SP106X1E4L is a 3-terminal data line filter with 30 dB attenuation at 1000 MHz. It operates b/w -40 to 85 °C and has a rated voltage of 25 V, making it ideal for high-frequency noise suppression in electronic devices. With dimensions of L3.2XB1.6XH1.8 mm, this surface mount filter offers max insertion loss of 30 dB and is suitable for tape and reel packaging applications.
2743021447
Fair-rite Products
Fair-rite Products' 2743021447 is a chip bead data line filter with approvals from IEC. Featuring a max operating temperature of 125°C, it offers a min frequency of 10 MHz and max DC resistance of 0.0012 ohm. Ideal for applications requiring surface mount filters with dimensions L9.6XB3.05XH2.85 (mm).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ILHB0805ER601V
Vishay Intertechnology's ILHB0805ER601V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and an output impedance of 600 OHM. Ideal for surface mount applications in electronics requiring filtering at frequencies up to 100 MHz.
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; No. of Functions: 1; Output Impedance (ohm): 600 OHM; Length: 2 mm;
ILHB0805ER121V
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 5 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Output Impedance (ohm): 120 OHM; No. of Functions: 1;
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .03 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 5 A;
ILHB0603ER121V
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Dimensions: L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch);
Vishay Intertechnology's ILHB0603ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C and has a DC resistance of 0.1 ohm. Ideal for applications requiring a 120 OHM output impedance at frequencies up to 100 MHz, this chip is compact at L1.6xB0.8xH0.8 mm and mounts easily on surfaces.
ILHB0603ER600V
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 60 OHM; Terminal Finish: Nickel (Ni);
ILHB0603120+/-25%
Vishay Intertechnology's ILHB0603120+/-25% is a FERRITE CHIP filter with 120 OHM output impedance, suitable for data line applications. With dimensions of L1.6xB0.8xH0.8 mm and rated current of 2A, it operates b/w -55 to 125 °C, making it ideal for surface mount installations requiring low DC resistance (0.1 ohm).
ILHB0603RK121V
Vishay Intertechnology's ILHB0603RK121V is a FERRITE CHIP filter with 2 terminals, 120 OHM output impedance, and 2A rated current. Ideal for data line applications, it operates b/w -55°C to 125°C and has a compact size of L1.6xB0.8xH0.8 mm for surface mount installation.
ILHB0805ER251V
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .04 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
FERRITE CHIP; Maximum DC Resistance: .04 ohm; Rated Current: 3 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Maximum Operating Temperature: 125 Cel; No. of Terminals: 2;
FERRITE CHIP; Maximum DC Resistance: .02 ohm; Rated Current: 6 A; Width (mm): 1.6; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Maximum Operating Temperature: 125 Cel;
ILHB1206ER601V
Vishay Intertechnology's ILHB1206ER601V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2.5 A; Approvals (V): IEC; Width (mm): 1.6; Output Impedance (ohm): 600 OHM;
ILHB0805ER300V
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .015 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 6 A;
FERRITE CHIP; Maximum DC Resistance: .015 ohm; Rated Current: 6 A; No. of Terminals: 2; Height: .9 mm; Output Impedance (ohm): 30 OHM;
ILHB0805ER900V
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .025 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 5 A;
ILHB060360+/-25%ERE3
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: 2 A; Dimensions: L1.6XB0.8XH0.8 (mm)/L0.06XB0.03XH0.03 (inch); Terminal Finish: Tin (Sn); Height: .8 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved