Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Omron SHL-Q2255-01 is a SNAP ACTING/LIMIT SWITCH with SPST function. It offers 500000 cycles Electrical Life, 3.5mm Actuator Travel, and 9.81N Max Operating Force. Ideal for PANEL MOUNT applications in environments ranging from -10°C to 80°C with AC/DC contact current of 0.1A@125VAC/0.1A@30VDC respectively.
Median Price
$95.240
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$63.980
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$89.930
$70.220
Master Electronics
$92.850
$77.790
Newark
$93.680
DigiKey
$96.800
$67.095
RS Americas
$99.130
$76.330
Verical
$109.235
Element14
$120.170
$110.060
Nova Conductors
$68.010
TodayComponents
$85.470
$77.260
IBS Electronics
$130.222
$109.100
Vyrian
Aztec Data Supply Inc.
$2.530
AZTECH Wire
$7.917
Continental Prestige Electronics
$45.940
Semicontronic
$66.300
$64.642
$64.311
Netroflash
$66.650
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
This switch has a long electrical life, making it durable and reliable for long-term use.
The compact body width allows for easy installation in tight spaces or crowded control panels.
The single-pole, single-throw switch function is commonly used for simple on/off applications.
With a high maximum operating temperature, this switch is suitable for a wide range of environments and applications.
This low contact current rating allows for safe operation and minimal risk of electrical arcing.
The low minimum operating temperature ensures reliable performance even in cold environments.
The actuator travel distance of 3.5mm provides a precise and responsive switch operation.
The roller plunger actuator type offers smooth and consistent actuation for accurate control.
The maximum DC contact voltage of 30V allows for compatibility with a wide range of DC circuits.
The snap acting switch type provides quick and reliable switching action, making it ideal for limit switch applications.
With a maximum AC rating of 0.1A at 125VAC, this switch can handle moderate AC loads with ease.
The compact body length/diameter allows for versatile mounting options and easy integration into existing systems.
The maximum operating force of 9.81N ensures reliable actuation without requiring excessive manual force.
The DC maximum rating of 0.1A at 30VDC allows for safe and efficient operation in DC circuits.
This low DC contact current rating ensures minimal power consumption and heat generation during operation.
The momentary switch action is ideal for applications where temporary contact closure is required.
The screw termination type allows for secure and reliable connections to external circuits.
The high maximum AC contact voltage of 125V ensures compatibility with a wide range of AC systems.
The maximum pre-travel distance of 1.5mm ensures precise and consistent actuation before contact closure.
The panel mounting feature allows for easy installation on control panels or equipment enclosures for convenient access and operation.
Snap Action & Limit Switches SHL-Q2255-01 attributes and parameters. Explore more Snap Action & Limit Switches devices from Omron
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum AC Contact Voltage:
Maximum DC Contact Voltage:
Electrical Life:
Manufacturer Series:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
SHL-Q2255-01 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
PCN Design/Specification - Multiple Devices Nameplate May/2015
As a global leader in the field of automation, OMRON’s business fields cover a broad spectrum, ranging from industrial automation and electronic components to social systems including automated ticket gates and solar power conditioners, healthcare. At present, OMRON provides products and services in around 120 countries and regions.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
EU2B-YS3203F
Idec
ROTARY SWITCH;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2DM1
Honeywell Sensing And Control
2DM1 by Honeywell Sensing And Control is a DPDT snap action/limit switch with 10A@277VAC AC contact rating. Featuring a plastic plunger actuator, it has a body width of 17.27 inch and max operating force of 6.67 N. Ideal for panel mount applications requiring momentary switch action with quick connect termination type.
XCKJ10543H7
Schneider Electric Sa
SNAP ACTING/LIMIT SWITCH;
D2FS-FL-N-A1
Omron
Z-15GW22-B
Omron Z-15GW22-B is a snap action/limit switch with SPDT function. It has an electrical life of 500,000 cycles and can handle up to 15A@250VAC. With a short hinge roller lever actuator, it is suitable for panel mounting applications requiring momentary switch action in temperatures ranging from -25°C to 80°C.
SPVR110102
Alps Alpine
Alps Alpine SPVR110102 is a SNAP ACTING/LIMIT SWITCH with 50000 cycles Electrical Life and 100000000 ohm Insulation Resistance. It has a max operating temperature of 85°C, making it suitable for various applications requiring precise momentary switch action in electronics.
XCKJ10511547
XCKP2102G11
D3SH-B1R
Omron's D3SH-B1R snap action switch has a 100000 cycle electrical life, SPST switch function, and 3.8mm actuator travel. With a max operating force of 0.3N, it is ideal for applications requiring momentary switch action in temperatures ranging from -25°C to 85°C.
LSYAC1A
LSYAC1A by Honeywell is a SPDT snap action/limit switch with EPOXY TERMINAL SEALING (IP65, IP66, IP67). It has a max operating temp of 121°C and can handle up to 10A@600VAC. Ideal for panel mounting applications requiring momentary switch action in environments ranging from -12°C to 121°C.
D4A-4918N
Omron D4A-4918N is a DPDT snap action/limit switch with 750,000 cycles electrical life. Featuring IP67 sealing, it operates b/w -40°C to 100°C. With a roller lever actuator, it has 5A@125VAC and 5A@14VDC max ratings for various applications like panel mounting.
V7-1Z13E9
V7-1Z13E9 by Honeywell is a SPDT snap action/limit switch with 10.2" body width, 15.9mm height, and 2.46mm actuator travel. It has a max operating temperature of 82°C and can handle up to 25A@277VAC AC contact current. Ideal for panel mounting applications requiring momentary switch action with quick connect termination type.
D4NL-4HFA-B
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4NL;
21CX14
21CX14 by Honeywell Sensing And Control is a SPDT snap action/limit switch with EPOXY TERMINAL SEALING and EXPLOSION PROOF sealing. It has a max AC contact current of 15A@480VAC and DC contact voltage of 0.5A@125VDC, making it suitable for PANEL MOUNT applications requiring MOMENTARY switch action.
GLCB01A2A
GLCB01A2A by Honeywell is a SPDT snap action/limit switch with IP67 sealing. It has a max operating temperature of 85°C and can handle up to 10A@300VAC. Ideal for applications requiring a side rotary actuator, such as industrial machinery and automation systems.
BZE7-2RN2-C
BZE7-2RN2-C by Honeywell is a SPDT snap action/limit switch with IP65 sealing. It has a max operating temperature of 71°C and can handle 0.5A@480VAC AC contact current. Ideal for panel mounting applications requiring momentary switch action and top roller arm actuator type.
D2SW-P01L3M
The Omron D2SW-P01L3M is a snap action/limit switch with SPDT function. It has an electrical life of 200,000 cycles and sealing rating of IP67, making it suitable for harsh environments. With a max operating temperature of 70°C and actuator travel of 0.8mm, it is commonly used in panel mount applications requiring momentary switch action.
XCF3-S1Z1
Johnson Electric Group
Snap Acting/Limit Switches;
BZ-2RW84-A2
BZ-2RW84-A2 by Honeywell is a SPDT snap action switch with 15A@480VAC AC rating and 0.5A@125VDC DC rating. With a body width of 17.45 inch, it has a max operating force of 0.28 N and actuator travel of 13.89 mm. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
LSA1A-2D
LSA1A-2D by Honeywell is a SPDT snap action/limit switch with side rotary actuator. It has a max operating temp of 121°C and min of -12°C, suitable for panel mounting applications. With max DC contact voltage of 250V and AC contact voltage of 600V, it offers reliable momentary switch action using wire termination.
11SX21-T
11SX21-T by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features PHENOLIC housing, SILVER terminal material, and PLASTIC PLUNGER actuator type. Ideal for applications requiring momentary switch action, with max AC contact current of 5A@115VAC and operating temperature range from 121 to 204 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SHL-Q2155
Omron's SHL-Q2155 is a SPST snap action/limit switch with 500000 cycles electrical life. It features a CROSSROLLER PLUNGER actuator, 3.5mm travel, and 9.81N max operating force. Ideal for panel mounting applications, it has a max AC contact current of 10A@250VAC and operates b/w -10°C to 80°C temperature range.
SHL-Q2255-01MR
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: SHL;
SHL-Q2255
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): ROLLER PLUNGER; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -10 Cel;
SHL-Q2155-MD
SHL-Q2255-01L4MR
SHL-Q2255-01MD
SHL-Q2255-01ML
SHL-Q2155-01
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPST; Type (Actuator): CROSSROLLER PLUNGER; AC Maximum Rating R Load (Contact): .1A@125VAC; Switch Action: MOMENTARY;
SHL-Q2155-01MR
SHL-Q2155-MR
SHL-Q2155-L3MR
SHL-Q2255-01L4MD
SHL-Q2155-LMR
SHL-Q2255-01LMR
SHL-Q2155-01L4MR
SHL-Q2155-ML
SHL-Q2255-01L3ML
SHL-Q2155-01L3MR
SHL-Q2155-L4MR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved