Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Honeywell Sensing And Control 914CE31-6 is a SPDT snap action/limit switch with 16" body width and 43.99mm height. It has a max AC contact current of 5A@250VAC, suitable for panel mount applications requiring momentary switch action and steel roller actuator type with 4.8mm travel distance.
Median Price
$241.820
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
RS Americas
1+ parts
$211.160
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$241.420
RS (Exports)
$242.220
Verical
$297.682
Nova Conductors
$171.677
Electro Sonic
$244.880
Vyrian
VNN
Electronic Supply
AZTECH Wire
$19.444
Allen Electronics Distributors
$163.930
Continental Prestige Electronics
$168.243
Ampacity Inc.
$179.490
Argo Parts USA
Assy Fe
Perfect Parts
The wide body design provides stability and durability to the switch, making it suitable for heavy-duty applications.
Single Pole Double Throw function allows for versatile circuit control options, making the switch adaptable to different electrical configurations.
The compact body height makes it easy to integrate the switch into various equipment and machinery without taking up much space.
With a high contact current rating, this switch can reliably handle electrical loads up to 5A, suitable for a wide range of industrial applications.
The actuator travel distance of 4.8mm provides precise and accurate switching action, ensuring efficient operation of the switch.
The steel roller actuator ensures durability and longevity of the switch, ideal for repetitive and high-cycle applications.
The snap acting mechanism provides quick and reliable switching action, while the limit switch feature allows for precise end-point detection in mechanical systems.
The high AC contact rating of 5A at 250VAC ensures safe and reliable operation in high-voltage applications.
The compact body length/diameter allows for easy installation and integration of the switch in tight spaces, making it suitable for various equipment designs.
The high operating force rating of 22.24N ensures reliable actuation of the switch even in challenging environments, making it suitable for heavy-duty applications.
The momentary switch action allows for quick and temporary circuit control, making it ideal for applications where precise and instantaneous switching is required.
The wire termination type simplifies the installation process and allows for easy connection to external circuits, enhancing the overall efficiency of the switch.
The high AC contact voltage rating of 250V ensures compatibility with a wide range of electrical systems and applications, making it a versatile choice for different setups.
The maximum pre-travel distance of 1.8mm ensures quick and responsive actuation of the switch, improving overall efficiency and performance.
The panel mounting feature allows for secure and stable installation of the switch on various panels and surfaces, ensuring proper alignment and operation in different settings.
Snap Action & Limit Switches 914CE31-6 attributes and parameters. Explore more Snap Action & Limit Switches devices from Honeywell Sensing And Control
Actuator Travel (mm):
Type (Actuator):
Body Width:
Body Height:
Body Length/Diameter:
AC Maximum Rating R Load (Contact):
Maximum AC Contact Current:
Maximum AC Contact Voltage:
Mounting Feature:
Maximum Operating Force:
Maximum Pre Travel:
Switch Action:
Switch Function:
Switch Type:
Termination Type:
914CE31-6 Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
Honeywell traces its roots to 1885 with Albert Butz's firm, Butz-Thermo Electric Regulator, which produced a predecessor to the modern thermostat. Today, Honeywell is a global multi-industry behemoth with one of the largest installed bases of equipment. The firm operates through four business segments, including aerospace, building technologies, performance materials and technologies, and safety and productivity solutions. In recent years, the firm has made several portfolio changes, including the addition of Intelligrated in 2016, as well as the spins of Garrett Technologies and Resideo in 2018. In 2019, the firm launched Honeywell Forge, its enterprise performance management software solution that leverages the firm's domain expertise in buildings, airlines, and critical infrastructure.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
Changzhou Starsea Electronics
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
11SM244-T
Honeywell Sensing And Control
11SM244-T by Honeywell is a SPDT snap action/limit switch with 6.35" body width, 9.04mm height, and 0.63mm actuator travel. It has a max operating temperature of 204°C and can handle up to 5A@250VAC or 0.3A@125VDC. Ideal for panel mounting applications requiring momentary switch action.
BA-2RV2-A2
Honeywell's BA-2RV2-A2 is a SPDT snap action/limit switch with 20A@480VAC AC rating and 0.5A@125VDC DC rating. Featuring a wide sintered stainless steel roller actuator, it has 13.41mm travel and 11.89mm pre-travel for precise control applications. Ideal for panel mounting, this switch offers reliable performance in various industrial settings.
D2F-01FL-D3
Omron
Omron's D2F-01FL-D3 is a SPDT snap action/limit switch with 30000 cycles electrical life. Featuring HINGE LEVER actuator type, it has 0.55mm actuator travel and 0.74N max operating force. Ideal for panel mounting applications, it operates b/w -25°C to 65°C with IP40 sealing for protection.
1LS1-4C
1LS1-4C by Honeywell is a SPDT snap action/limit switch with max. AC contact current of 0.8A@480VAC and DC contact current of 0.8A@550VDC. It has a side rotary actuator, operates b/w -29°C to 71°C, and is ideal for panel mounting applications requiring momentary switch action.
BZ-2RW82224-A2
Honeywell Sensing And Control's BZ-2RW82224-A2 is a SPDT snap action/limit switch with 15A@480VAC AC rating. Featuring wide sintered stainless steel roller actuator, it has 1.67N max operating force and 2.39mm actuator travel. Ideal for panel mount applications requiring momentary switch action.
411SM1
411SM1 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT switch function. It features a body width of 6.35 inch and corrosion-proof sealing, suitable for panel mounting applications. With a max operating temperature of 121°C and AC contact current rating of 5A@250VAC, it offers reliable performance in various industrial settings.
BZE6-2RQ2
BZE6-2RQ2 by Honeywell Sensing And Control is a snap action/limit switch with a body width of 25.4 inch and sealing rating of IP40. It has a max AC contact current of 15 A and is commonly used for panel mounting applications.
D4NL-1EFA-B
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4NL;
SS-5GL111-F-3
SNAP ACTING/LIMIT SWITCH;
D4SL-N4DFG
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: D4SL-N;
11SM3-S
11SM3-S by Honeywell Sensing And Control is a SPDT snap action/limit switch with a plastic plunger actuator. It has a max AC contact current of 5A@250VAC and DC contact current of 5A@30VDC. Ideal for panel mounting applications, it offers 0.63mm actuator travel and 0.97N max operating force.
3SE5242-0HC05
Siemens
622EN1-6
Honeywell Sensing And Control's 622EN1-6 is a corrosion-proof DPDT snap acting/limit switch with steel roller actuator. It has a max operating force of 53.38N, DC contact current of 7A@28VDC, and operates at a max temperature of 85°C. Ideal for panel mount-threaded applications requiring momentary switch action.
311SM4
311SM4 by Honeywell Sensing And Control is a Snap Action & Limit Switch with SPDT function. It features a body width of 6.35in, max operating temperature of 121°C, and max AC contact current of 5A. Ideal for panel mounting applications requiring momentary switch action with simulated roller lever actuator.
DC1CC3RC
Zf Friedrichshafen Ag
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): ROLLER TYPE; Contact Function: ON-(ON); Switch Action: MOMENTARY;
SS-5GL2D
Omron SS-5GL2D is a SPDT snap acting/limit switch with 2A@250VAC AC max rating, 200000 cycles electrical life, and IP40 sealing. It features hinge roller lever actuator type, SILVER end contact material, and -25 to 85 °C operating temperature range. Ideal for applications requiring momentary switch action in industrial automation systems.
E68-30A
The Cherry
The Cherry E68-30A is a SPDT snap action/limit switch with gold-plated contacts. With a 6000-cycle electrical life, it operates at temperatures from -40 to 85°C. Ideal for panel mounting applications requiring a max AC contact current of 0.1A@125VAC.
LSXYMB4N
LSXYMB4N by Honeywell Sensing And Control is a 41.4" wide, 116.8mm high snap acting/limit switch with DPDT switch function and side rotary actuator type. It is explosion proof, operates b/w -1°C to 121°C, handles up to 10A@240VDC current, and has a max AC contact voltage of 600V. Ideal for panel mounting applications requiring momentary switch action in hazardous environments.
311SM701-H58
311SM701-H58 by Honeywell is a SPDT snap action/limit switch with 6.35" width, 12.52mm height, and 19.84mm length. It has a max operating temperature of 121°C and can handle up to 4A@250VAC or 5A@30VDC current loads. Ideal for panel mounting applications requiring momentary switch action with wire termination.
SS-01D2
Omron SS-01D2 is a SPDT snap action/limit switch with 200000 cycles electrical life. Featuring IP40 sealing, it has a max operating force of 1.47N and operates at temperatures ranging from -25°C to 85°C. Ideal for applications requiring momentary switch action and through hole-right angle mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
914CE3-3G
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSS ROLLER PLUNGER (90 DEGREE ROTATED; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 70 Cel;
914CE3-3A
The Honeywell Sensing And Control 914CE3-3A is a SPDT snap action/limit switch with 16" body width and 43.99mm height. It has a max AC contact current of 5A@250VAC, making it ideal for panel mounting applications requiring momentary switch action with steel roller actuator travel of 4.8mm.
914CE31-3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL ROLLER; Body Height: 44 mm; Termination Type: WIRE;
914CE3-3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL ROLLER; Body Height: 43.99 mm; Maximum Pre Travel: 18.03 mm;
914CE31-3L1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Maximum AC Contact Voltage: 240 V; Termination Type: WIRE;
914CE3-3AK
The Honeywell Sensing And Control 914CE3-3AK is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a steel roller actuator, it has 4.8mm travel and 12.01N operating force. Ideal for panel mounting applications requiring momentary switch action in industrial settings.
914CE3-3K
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL ROLLER; Maximum Pre Travel: 1.8 mm; Maximum AC Contact Current: 5 A;
914CE3-3KL1
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): CROSS ROLLER PLUNGER (90 DEGREE ROTATED; Maximum AC Contact Voltage: 240 V; Manufacturer Series: 914CE;
914CE3-3L1
SNAP ACTING/LIMIT SWITCH; Manufacturer Series: 914CE;
914CE18-3
914CE18-3 by Honeywell is a SPDT snap action/limit switch with 5A@250VAC AC contact rating. Featuring a steel plunger actuator, it has a 4.8mm travel and 1.8mm pre-travel, ideal for panel mounting applications requiring momentary switch action.
914CE3-12
The Honeywell Sensing And Control 914CE3-12 is a SPDT snap action/limit switch with 5A@250VAC rating. Featuring a steel roller actuator, it has a body width of 16in and max operating force of 12.01N. Ideal for panel mounting applications requiring momentary switch action.
914CE31-12
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Minimum Operating Temperature: 0 Cel; Switch Action: MOMENTARY;
914CE31-12A
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL ROLLER; Maximum Operating Force: 22.24 N; Maximum Pre Travel: 1.8 mm;
914CE31-18
914CE31-18 by Honeywell is a SNAP ACTING/LIMIT SWITCH with SPDT switch function. It has IP66, IP67, and IP68 sealing for robustness. With a max AC contact current of 5A@250VAC, it's ideal for PANEL MOUNT applications requiring reliable performance in harsh environments.
914CE31-9AL1
914CE31-9V
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): TOP ROLLER PLUNGER; Maximum AC Contact Current: 5 A; Actuator Travel (mm): 4.8;
914CE31-AQ
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL ROLLER; Body Height: 43.99 mm; Switch Action: MOMENTARY;
914CE18-3A
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL PLUNGER; Maximum AC Contact Current: 5 A; Maximum Operating Force: 22.24 N;
914CE2-3
SNAP ACTING/LIMIT SWITCH; Mounting Feature: PANEL MOUNT; Switch Function: SPDT; Type (Actuator): STEEL ROLLER; Body Width: 16 inch; Termination Type: WIRE;
914CE3-9
The Honeywell Sensing And Control 914CE3-9 is a SPDT snap action/limit switch with 16" body width and 43.99mm height. It has a max AC contact current of 5A@250VAC, suitable for panel mounting applications requiring momentary switch action with roller type actuator.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved