Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Maximum Power Dissipation (Abs): 48 W; Minimum Power Gain (Gp): 12 dB; Transistor Application: AMPLIFIER;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Vyrian
Manotoh
Native Components
$0.931
Northwest PG Solutions
$1.024
One Stop Electronics
$32.050
Corphita
UNI Independent Distributors
RF Power Field Effect Transistors (FET) BLF544B attributes and parameters. Explore more RF Power Field Effect Transistors (FET) devices from NXP Semiconductors
Additional Features:
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
Highest Frequency Band:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation Ambient:
Maximum Power Dissipation (Abs):
Minimum Power Gain (Gp):
Qualification:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
BLF544B Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.29.00.75
SB
8541.29.00.80
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
Bkc Semiconductors
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
Micro Commercial Components
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
Kec
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TGF4230-EPU
Texas Instruments
TGF4230-EPU by Texas Instruments is an N-CHANNEL RF Power FET for X BAND applications. Features HETERO-JUNCTION tech with GALLIUM ARSENIDE material. Surface mount, 4 terminals, RECTANGULAR package ideal for high-frequency circuit designs.
934065907118
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (ID): 56 A;
934065695118
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Case Connection: SOURCE; Package Style (Meter): FLANGE MOUNT; Operating Mode: ENHANCEMENT MODE;
RF5L0912750CB4
STMicroelectronics
RF Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Nickel/Gold/Cobalt (Ni/Au/Co);
A2T23H300-24SR6
RF Power Field-Effect Transistors; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40;
TIM1314-30L
Toshiba
The Toshiba TIM1314-30L is an N-channel RF Power FET with a ceramic/metal-sealed co-fired package. It operates in depletion mode, suitable for amplifier applications in the Ku band. With a max drain current of 20A and power dissipation of 136W, it offers high performance in a flange mount package.
PD85015-E
PD85015-E by STMicroelectronics is an N-channel RF power FET designed for amplifier applications. It features a max drain current of 5 A, a breakdown voltage of 40 V, and operates in the ultra-high frequency band. Its compact surface mount design ensures efficient performance in various electronic devices.
PD85006-E
PD85006-E by STMicroelectronics is an N-channel RF power FET designed for amplifier applications. It features a max drain current of 2 A, a breakdown voltage of 40 V, and operates in the ultra-high frequency band. This compact surface mount device ensures efficient performance with a max power dissipation of 36.5 W.
TGF4212SCMX
TGF4212SCMX by Texas Instruments is an N-CHANNEL RF Power FET for AMPLIFIER applications. Features include 10V DS Breakdown Voltage, DEPLETION MODE operation, and KU BAND frequency band. This RECTANGULAR chip with GALLIUM ARSENIDE technology has 4 terminals and is surface mountable.
MRF134
New Jersey Semiconductor Products
N-CHANNEL; Configuration: SINGLE; Transistor Element Material: SILICON; Maximum Drain Current (ID): .9 A; No. of Elements: 1; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND;
MRF374
The NXP Semiconductors MRF374 is an N-CHANNEL RF Power FET with 65V DS Breakdown Voltage, 12.5 dB Power Gain, and operates in the Ultra High Frequency Band. Commonly used as an AMPLIFIER in ENHANCEMENT MODE, it has a max Drain Current of 7A and can operate at temperatures up to 200°C.
AFT09H310-04GSR6
N-CHANNEL; Configuration: SINGLE; Maximum Operating Temperature: 225 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Peak Reflow Temperature (C): 260; No. of Elements: 1;
PD84008TR-E
PD84008TR-E by STMicroelectronics is an N-channel RF power FET designed for amplifier applications. It features a max drain current of 7 A, a breakdown voltage of 25 V, and operates in the ultra-high frequency band. This surface-mount transistor ensures efficient performance with a max power dissipation of 79 W.
A3T21H400W23SR6
N-CHANNEL; Configuration: COMPLEX; Surface Mount: YES; Terminal Form: FLAT; Maximum Operating Temperature: 225 Cel; Transistor Element Material: SILICON;
STAP57100
STAP57100 by STMicroelectronics is an N-channel RF power FET designed for amplifier applications. It features a max drain current of 14 A, a breakdown voltage of 65 V, and operates in the ultra-high frequency band. Its robust ceramic-metal sealed package ensures reliable performance up to 165 °C.
ARF463AP1G
Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 180 W; Case Connection: SOURCE; Qualification: Not Qualified;
MRF1513T1
Motorola
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 31.2 W; Maximum Operating Temperature: 150 Cel; Package Style (Meter): CHIP CARRIER;
934061137112
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Highest Frequency Band: S BAND; Maximum Drain Current (ID): 8.2 A;
LET20015
LET20015 by STMicroelectronics is an N-channel RF power FET designed for amplifier applications. It features a 65V breakdown voltage, operates at up to 2A drain current, and supports L-band frequencies. Its compact surface mount design ensures efficient performance in various electronic devices.
MRF181SR1
MRF181SR1 by Onsemi is an N-CHANNEL RF Power FET with 65V DS Breakdown Voltage. It operates in the ULTRA HIGH FREQUENCY BAND, ideal for AMPLIFIER applications. This SINGLE configuration FET has a max ID of 2A and comes in a CERAMIC, METAL-SEALED COFIRED package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLF574
The NXP Semiconductors BLF574 is an RF Power FET with a common source configuration and 2 elements. Operating in the ultra high frequency band, it has a max drain current of 56A and operates in enhancement mode. Ideal for amplifier applications, this transistor features a ceramic-metal sealed co-fired package body material and can withstand temperatures up to 225°C.
Ampleon Netherlands B V
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Transistor Element Material: SILICON; Maximum Time At Peak Reflow Temperature (s): 30; No. of Elements: 2;
BLF571,112
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Style (Meter): FLANGE MOUNT; Peak Reflow Temperature (C): 245; Moisture Sensitivity Level (MSL): 1;
BLF546
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Transistor Application: AMPLIFIER; Maximum Drain Current (ID): 9 A; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
BLF573S
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Peak Reflow Temperature (C): NOT SPECIFIED; No. of Terminals: 2; Maximum Drain Current (ID): 42 A;
BLF543
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Minimum DS Breakdown Voltage: 65 V; Package Style (Meter): FLANGE MOUNT;
BLF542
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 200 Cel; Minimum DS Breakdown Voltage: 65 V; Maximum Drain Current (ID): 1.5 A;
BLF574XR
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Minimum DS Breakdown Voltage: 110 V; Package Style (Meter): FLANGE MOUNT; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
BLF544
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Drain Current (Abs) (ID): 3.5 A; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND; Case Connection: ISOLATED;
BLF547
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Case Connection: SOURCE; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 65 V;
BLF548
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Maximum Power Dissipation (Abs): 330 W; Maximum Drain-Source On Resistance: .3 ohm; Minimum DS Breakdown Voltage: 65 V;
BLF573
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Transistor Application: AMPLIFIER; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
BLF545
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Maximum Power Dissipation (Abs): 92 W; Minimum DS Breakdown Voltage: 65 V; Terminal Form: FLAT;
BLF544,112
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: HIGH RELIABILITY; JESD-30 Code: R-CDFM-F6;
BLF548,112
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Maximum Power Dissipation (Abs): 330 W; Transistor Element Material: SILICON; Highest Frequency Band: ULTRA HIGH FREQUENCY BAND;
BLF546,112
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Maximum Drain Current (Abs) (ID): 9 A; Package Body Material: CERAMIC, METAL-SEALED COFIRED; Maximum Operating Temperature: 200 Cel;
BLF522
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 20 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
BLF542,112
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum Power Gain (Gp): 13 dB; Package Body Material: CERAMIC, METAL-SEALED COFIRED;
BLF571
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; JESD-30 Code: R-CDFM-F2; Minimum DS Breakdown Voltage: 110 V; Package Style (Meter): FLANGE MOUNT;
BLF578XR
N-CHANNEL; Configuration: COMMON SOURCE, 2 ELEMENTS; Surface Mount: YES; Terminal Position: DUAL; No. of Elements: 2; JESD-30 Code: R-CDFM-F4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved