Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Power Supplies (V): 24; Construction: MODULE; No. of Functions: 1;
Median Price
$31.962
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$28.410
1k+ parts
$25.420
10k+ parts
$23.930
DigiKey
Verical
$35.513
$31.775
$29.913
Component Sense
$29.685
$25.727
Digiode
$30.077
Vyrian
Anansix
Corphita
$28.494
Microchip USA
$41.161
Native Components
$82.320
$79.027
Northwest PG Solutions
$90.551
UNI Independent Distributors
RF & Microwave Amplifiers BGE787B,112 attributes and parameters. Explore more RF & Microwave Amplifiers devices from NXP Semiconductors
Additional Features:
Characteristic Impedance:
Construction:
Gain:
No. of Functions:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
BGE787B,112 RF & Microwave trade compliance attributes, and parameters.
HTS
8542.33.00.01
SB
8542.33.00.00
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
HMC414MS8GETR
Hittite Microwave
NARROW BAND MEDIUM POWER; JESD-609 Code: e3; Maximum Operating Frequency: 2800 MHz; Maximum Input Power (CW): 17 dBm; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn);
XB1007-QT-0G00
M/a-com Technology Solutions
XB1007-QT-0G00 by M/a-com is a GAAS technology RF amplifier with 23 dB gain, operating from 4-11 GHz. It has a max input power of 20 dBm and operates b/w -55 to 85°C. Ideal for wideband medium power applications requiring surface mounting features.
BGU6101,147
NXP Semiconductors
The NXP Semiconductors BGU6101,147 is a wide band low power RF amplifier with 4dB gain. It operates b/w 40MHz to 4000MHz, suitable for various RF and microwave applications. With a max supply current of 10mA and operating temperature range from -40°C to 85°C, it is ideal for surface mount installations.
SGA6286Z
Qorvo
SGA6286Z by Qorvo is a wide band low power RF amplifier with 12.5 dB gain and 50 ohm impedance. It operates from 0 to 5500 MHz, handling up to 18 dBm CW input power. This component is ideal for surface mount applications in RF and microwave systems.
AG303-86G
Wj Communications
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Operating Temperature: 85 Cel;
MGA-61563-BLKG
Broadcom
Broadcom's MGA-61563-BLKG is a GAAS RF amplifier with 6.9dB gain, operating from 100MHz to 6GHz. It has a max input power of 18dBm and VSWR of 2, suitable for wideband low-power applications in RF & microwave systems. With a compact plastic/epoxy package and surface mounting feature, it offers high performance with 48mA supply current at 3/5V.
HMC5879LS7
WIDE BAND HIGH POWER;
HMC564LC4TR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: CERAMIC; Technology: GAAS; Maximum Input Power (CW): 5 dBm;
MMG3002NT1
NXP Semiconductors' MMG3002NT1 is a wide band low power RF amplifier with 19.3 dB gain, handling up to 12 dBm CW input power. Operating from 40 MHz to 3600 MHz, it's ideal for RF and microwave applications requiring high performance in a compact form factor.
M67799HA
Mitsubishi Electric
Mitsubishi Electric's M67799HA is a hybrid module with 450-470 MHz frequency range, 50 ohm impedance, and 14.77 dBm CW input power. Ideal for narrowband high-power RF applications, it operates b/w -30 to 100°C with VSWR of up to 20 in plastic/epoxy package.
TGA2237-SM
Triquint Semiconductor
WIDE BAND HIGH POWER; Terminal Finish: GOLD OVER NICKEL; Gain: 19 dB; Construction: COMPONENT; Minimum Operating Frequency: 30 MHz; Maximum Input Power (CW): 33 dBm;
BGU8009
The NXP Semiconductors BGU8009 is a narrow band low power RF amplifier with a gain of 17.6 dB, operating b/w 1559-1610 MHz. It can handle up to 10 dBm CW input power and has an impedance of 50 ohm. Ideal for RF and microwave applications requiring high gain amplification in a compact form factor.
TQP7M9106
WIDE BAND HIGH POWER; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 1500 MHz; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 30 dBm; Gain: 19 dB;
HMC8325
Analog Devices
HMC8325 by Analog Devices is a PHEMT RF amplifier with 19.5 dB gain, operating b/w 71-86 GHz. It has 22 terminals, requires 3V power supply at max current of 50 mA. Ideal for wideband low-power applications in RF & microwave systems due to its surface mount construction and characteristic impedance of 50 ohms.
PMA3-83LNW+
Mini-circuits
PMA3-83LNW+ by Mini-circuits is a wide band low power RF amplifier with a gain of 16.9 dB. It operates at frequencies ranging from 400 MHz to 8000 MHz and has a max input power of 16 dBm. This amplifier is commonly used in applications requiring amplification in the RF and microwave range.
SKY67151-396LF
Skyworks Solutions
SKY67151-396LF by Skyworks Solutions is a wide band low power RF amplifier with 14.5 dB gain and 21 dBm CW input power. Operating from 700 MHz to 3800 MHz, it's ideal for RF & microwave applications requiring high performance in temperatures ranging from -40°C to 105°C.
MSA-1105-TR1G
Broadcom's MSA-1105-TR1G is a RF amplifier with 10dB gain, operating from 50MHz to 1300MHz. It has a max input power of 13dBm and VSWR of 1.7, suitable for wideband low-power applications. The component features surface mounting and operates at a supply voltage of 5.5V with a current draw of 70mA.
HMC311LP3ETR
Analog Devices' HMC311LP3ETR is a GAAS RF amplifier with 12dB gain, 50 ohm impedance, and 10 dBm CW input power. It operates from 0 to 6000 MHz, drawing 74mA at 5V. Ideal for wideband low-power applications in temperatures ranging from -40°C to +85°C.
MSA-1105
Hewlett Packard
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Construction: COMPONENT;
HMC994APM5E
Analog Devices' HMC994APM5E is a wide band medium power RF amplifier with 13 dB gain and 25 dBm CW input power. With a VSWR of 7, it operates from -40°C to 85°C, covering frequencies from 0 MHz to 28 GHz. Ideal for RF and microwave applications requiring high performance amplification in various environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGE787B
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; No. of Functions: 1; Additional Features: LOW NOISE; Maximum Supply Current: 340 mA;
BGE788
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Maximum Supply Current: 320 mA; Gain: 34 dB; Minimum Operating Temperature: -20 Cel;
BGE788,112
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Maximum Operating Frequency: 750 MHz; Power Supplies (V): 24; Minimum Operating Temperature: -20 Cel;
BGE788C
WIDE BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Minimum Operating Frequency: 40 MHz; Maximum Operating Frequency: 750 MHz; Power Supplies (V): 24;
BGE788C,112
RF/Microwave Amplifiers; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Package Equivalence Code: SOT-115J; Power Supplies (V): 24; Maximum Supply Current: 325 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved