Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Input Power (CW): 10 dBm;
Median Price
$0.209
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$0.197
1k+ parts
$0.178
10k+ parts
-
Digiode
$0.199
Vyrian
Anansix
Carlin Systems, Inc.
Ashlea Components Ltd
A&K Electronics
Rotakorn
Bristol Electronics
Corphita
$0.188
Component Stockers USA
$0.200
$0.190
AZTECH Wire
$19.330
A-Z Elektronik GmbH
Kepictronics
UNI Independent Distributors
Authorized Procurement Solutions
Perfect Parts
Northwest PG Solutions
Native Components
RF & Microwave Amplifiers BGA2771,115 attributes and parameters. Explore more RF & Microwave Amplifiers devices from NXP Semiconductors
Characteristic Impedance:
Construction:
Gain:
Maximum Input Power (CW):
JESD-609 Code:
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
RF or Microwave Device Type:
Sub-Category:
Maximum Supply Current:
Technology:
Terminal Finish:
BGA2771,115 RF & Microwave trade compliance attributes, and parameters.
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Obsolescence/ EOL - Multiple Devices 05/Jul/2015
PCN Design/Specification - Resin Hardener 02/Jul/2013
PCN Packaging - All Dev Label Update 15/Dec/2020 Date Code Extended 18/Jul/2013
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
ATMEGA328P-AU
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BAV99-7-F
Multicomp Pro
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
EU2B-YS3203F
Idec
ROTARY SWITCH;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Intertechnology
NE555D
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
HMC794LP3E
Hittite Microwave
WIDE BAND LOW POWER; Maximum Operating Frequency: 2000 MHz; Terminal Finish: Matte Tin (Sn); Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 200 MHz; Maximum Operating Temperature: 85 Cel;
HMC1040LP3CE
Analog Devices
HMC1040LP3CE by Analog Devices is a wide band low power RF amplifier with 17 dB gain and 50 ohm impedance. It operates from 24 to 43.5 GHz, with a max input power of 5 dBm and a supply current of 85 mA. This PHEMT technology component is ideal for RF and microwave applications requiring high performance in a compact package.
MW7IC2220NR1
Freescale Semiconductor
NARROW BAND HIGH POWER; Package Body Material: PLASTIC/EPOXY; Technology: MOS; Maximum Operating Temperature: 150 Cel; Maximum Operating Frequency: 2200 MHz; Characteristic Impedance: 50 ohm;
HMC794LP3ETR
WIDE BAND LOW POWER; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
HMC441LH5
HMC441LH5 by Analog Devices is a wide band medium power RF amplifier with 10.5 dB gain, operating from 7-15.5 GHz. It has a max input power of 15 dBm, suitable for RF & microwave applications requiring high performance in a compact ceramic package.
HMC694LP4ETR
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 24; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
HMC606LC5TR
Analog Devices' HMC606LC5TR is a wide band low power RF amplifier with 9.5 dB gain, operating from 2-18000 MHz. It has a max input power of 15 dBm and operates on a 5V supply with 95 mA current draw. Ideal for RF and microwave applications requiring high frequency amplification in compact designs.
MGA-72543-TR2G
Broadcom
Broadcom's MGA-72543-TR2G is a GAAS RF amplifier with 9.2 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 20 dBm and VSWR of 2.1, suitable for wideband low-power applications in RF and microwave systems.
RDA1005L
Rf Micro Devices
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Package Body Material: PLASTIC/EPOXY; Construction: COMPONENT; No. of Functions: 1;
CMPA0060002F1
Wolfspeed
WIDE BAND HIGH POWER;
HMC5879LS7
MSA-1105-STR
Hewlett Packard
WIDE BAND LOW POWER; Characteristic Impedance: 50 ohm; Additional Features: HIGH RELIABILITY; Maximum Voltage Standing Wave Ratio: 1.7; Gain: 10 dB; Maximum Operating Frequency: 1300 MHz;
HMC478MP86E
Analog Devices' HMC478MP86E is a wide band low power RF amplifier with 11 dB gain and 50 ohm impedance. It operates from 0 to 4000 MHz, handles up to 5 dBm input power, and has a compact surface mount package ideal for RF applications in temperatures ranging from -40 to 85°C.
AVA-0233LN+
Mini-circuits
WIDE BAND LOW POWER;
HMC903LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; JESD-609 Code: e3;
CMD192C5
Custom Mmic Design Services
WIDE BAND LOW POWER; Minimum Operating Temperature: -40 Cel; Gain: 17 dB; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Additional Features: LOW NOISE;
SBB4089Z
Qorvo
Qorvo's SBB4089Z is a wide band low power RF amplifier with 13.5 dB gain, operating from 50 MHz to 6 GHz. It has a max input power of 24 dBm and operates on a 5V supply with a current draw of 92 mA. Ideal for applications requiring surface mount construction in RF and microwave systems.
HMC606LC5TR-R5
Analog Devices' HMC606LC5TR-R5 is a wide band low power RF amplifier with 9.5 dB gain, suitable for frequencies ranging from 2-18 GHz. It can handle up to 15 dBm CW input power and operates in temperatures from -40 to 85°C. Ideal for RF and microwave applications requiring high performance in a compact component design.
CMPA901A035F1
CMPA2060035F1
NARROW BAND HIGH POWER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BGA2003,115
WIDE BAND LOW POWER; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Gain: 16 dB; Power Supplies (V): 2.5; Characteristic Impedance: 50 ohm;
BGA2003T/R
NXP Semiconductors' BGA2003T/R is a wide band low power RF amplifier with 16 dB gain, operating from 900 MHz to 1800 MHz. Ideal for RF applications requiring a 50 ohm impedance, this component offers high performance in amplifying signals within the specified frequency range.
BGA231N7E6330XTSA1
Infineon Technologies
NARROW BAND LOW POWER; Maximum Operating Frequency: 1615 MHz; Gain: 16 dB; Maximum Operating Temperature: 85 Cel; Construction: COMPONENT; Maximum Input Power (CW): 0 dBm;
BGA2817,115
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; JESD-609 Code: e3; Maximum Operating Temperature: 85 Cel;
BGA2815,115
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Power Supplies (V): 3.3; Terminal Finish: TIN;
BGA2870,115
NXP Semiconductors' BGA2870,115 is a RF & Microwave Amplifier with 2.5V power supply, 6 terminals, and 18.5mA max supply current. It features a plastic/epoxy package body material and tin terminal finish, suitable for surface mount applications in various electronic devices.
BGA2866,115
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Maximum Supply Current: 20.1 mA; No. of Functions: 1;
BGA2800
WIDE BAND LOW POWER; Maximum Input Power (CW): -16.5 dBm; Terminal Finish: TIN; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; Maximum Operating Frequency: 2200 MHz;
BGA2867,115
RF/Microwave Amplifiers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; JESD-609 Code: e3; Package Equivalence Code: TSSOP6,.08;
BGA2031/1,115
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Voltage Standing Wave Ratio: 1.4;
BGA2011
NARROW BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Package Equivalence Code: TSSOP6,.08;
BGA2031T/R
NARROW BAND LOW POWER; Maximum Voltage Standing Wave Ratio: 1.7; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Additional Features: IT CAN ALSO OPERATE AT 800 TO 2500 MHZ; Gain: 27 dB;
BGA2031/1
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Maximum Input Power (CW): 23 dBm;
BGA2031/1T/R
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Minimum Operating Frequency: 800 MHz;
BGA2002
WIDE BAND LOW POWER; Gain: 16 dB; Maximum Operating Frequency: 2200 MHz; Characteristic Impedance: 50 ohm; Construction: COMPONENT; Minimum Operating Frequency: 0 MHz;
BGA2011,115
NARROW BAND LOW POWER; Terminal Finish: Tin (Sn); Construction: COMPONENT; Characteristic Impedance: 50 ohm; Gain: 15 dB; JESD-609 Code: e3;
BGA2001
NARROW BAND LOW POWER; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; Characteristic Impedance: 50 ohm; Gain: 19.5 dB; Construction: COMPONENT;
BGA2001,115
NARROW BAND LOW POWER; Gain: 19.5 dB; JESD-609 Code: e3; Terminal Finish: Tin (Sn); Maximum Operating Frequency: 1800 MHz; Construction: COMPONENT;
BGA2011T/R
NARROW BAND LOW POWER; JESD-609 Code: e3; Construction: COMPONENT; Gain: 15 dB; Terminal Finish: Tin (Sn); Characteristic Impedance: 50 ohm;
BGA2012
NARROW BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: BIPOLAR; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved