Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIDE BAND MEDIUM POWER; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4;
Median Price
$106.670
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aztec Data Supply Inc.
$1.788
AZTECH Wire
$10.002
Aranea Global
$104.537
$100.355
Continental Prestige Electronics
Corohmni
Advanced Electronics
$108.803
Argo Parts USA
RF & Microwave Amplifiers TQP7M9102-PCB900 attributes and parameters. Explore more RF & Microwave Amplifiers devices from Qorvo
JESD-609 Code:
RF or Microwave Device Type:
Terminal Finish:
Your car. Your smartphone. Your wrist. Your heart. Even outer space. Qorvo products are at work connecting, protecting and powering the planet. We bring core radio frequency (RF) and power technologies and solutions to mobile, infrastructure, the IoT, defense/aerospace and power management markets. Transforming the way you live, work, play and communicate — that's what inspires us. Innovation. Product Leadership. Scale. Speed. At Qorvo, we are driven by the possibility of discovery — of new RF and power technologies and advancements in design, manufacturing and communications that make the world a better, cleaner and more connected place. We've been working on that for more than 30 years, both as innovators and as stewards of our planet. And we are just getting started.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1554216002
Molex
WIRE AND CABLE;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
Zowie Technology
MGA-62563-BLKG
Agilent Technologies
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Power Supplies (V): 3/5;
HMC327MS8G
Hittite Microwave
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
RA07N4047M-101
Mitsubishi Electric
RA07N4047M-101 by Mitsubishi Electric is a RF amplifier module with max input power of 14.77 dBm and VSWR of 4. It operates in the frequency range of 400-470 MHz, ideal for narrowband high-power applications. With a temperature range from -30 to 90°C, it is suitable for various RF and microwave systems.
RF3827
Qorvo
Qorvo's RF3827 is a wide band medium power amplifier with 20dB gain, operating from 5MHz to 1500MHz. It has a max input power of 13dBm and VSWR of 20, suitable for RF applications requiring up to 8V supply voltage. The component is constructed using GaAs technology in a plastic/epoxy package, ideal for surface mounting in various RF and microwave systems.
QPA1019TR7
Qorvo's QPA1019TR7 is a wide band high power RF amplifier with 30 dB gain, operating from 4.5 GHz to 7 GHz. It can handle up to 28 dBm CW input power and has gold terminal finish. Ideal for RF & microwave applications requiring high power amplification in temperatures ranging from -40°C to 85°C.
MWA330
The Motorola MWA330 is a RF & Microwave Amplifier with max input power of 20 dBm and VSWR of 3. It operates in wide band low power applications from 0.1 MHz to 1000 MHz, making it ideal for various hybrid technology modules. With a metal package body, it can withstand temperatures from -25°C to 80°C.
QPA1003P
Qorvo's QPA1003P is a GAN RF amplifier with 31.4 dB gain, operating from 1-8 GHz. It handles up to 18 dBm CW input power, VSWR of 3, and requires 28V supply. Ideal for wideband high-power applications in RF & microwave systems.
HMC8413LP2FETR
Analog Devices
HMC8413LP2FETR by Analog Devices is a wide band medium power RF amplifier with 17 dB gain, suitable for frequencies ranging from 10 MHz to 9000 MHz. It has a max input power of 25 dBm and VSWR of 1.29, making it ideal for RF and microwave applications requiring high performance amplification in the temperature range of -40°C to 85°C.
HMC637ALP5E
WIDE BAND MEDIUM POWER; Minimum Operating Temperature: -40 Cel; Gain: 12 dB; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 6000 MHz; Minimum Operating Frequency: 0 MHz;
HELA-10D
Mini-circuits
HELA-10D by Mini-circuits is a wideband medium power RF amplifier with 9.3 dB gain, handling up to 20 dBm CW input power. It operates b/w 8-300 MHz frequencies with VSWR of 1.2, suitable for various RF and microwave applications requiring a 50 ohm impedance.
RF6886SR
Qorvo's RF6886SR is a wide band high power amplifier with 31 dB gain, operating from 433 MHz to 470 MHz. It has a max input power of 12 dBm and VSWR of 5, suitable for RF & microwave applications requiring high power amplification in plastic/epoxy package.
HMC441LH5TR
Analog Devices' HMC441LH5TR is a GAAS RF amplifier with 12 terminals, operating from -40 to 85°C. It has a power supply of 5V and max current draw of 115mA. Ideal for wideband medium-power applications, this surface-mount device offers reliable performance in RF and microwave systems.
HMC505LP4ETR
Analog Devices' HMC505LP4ETR is a RF amplifier with 24 terminals, operating from -40°C to 85°C. It features a narrow band low power design, powered by 3V supply. Ideal for surface mount applications in RF and microwave systems.
HMC414MS8GETR
Analog Devices' HMC414MS8GETR is a RF amplifier with 17 dB gain, operating from 2200-2800 MHz. It can handle up to 17 dBm CW input power and has a characteristic impedance of 50 ohm. Ideal for narrowband medium power applications in temperatures ranging from -40 to 85°C.
MGA-62563-TR2G
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Package Equivalence Code: TSSOP6,.08;
HMC902LP3E
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; Maximum Input Power (CW): 10 dBm;
PTMA180402M-V1-R500
Wolfspeed
NARROW BAND HIGH POWER;
XF1001-SC-0G0T
M/a-com Technology Solutions
XF1001-SC-0G0T by M/a-com Technology Solutions is a wide band medium power RF amplifier with 10.1 dB gain and max input power of 24 dBm. It operates in the frequency range of 0-6000 MHz, making it suitable for various RF and microwave applications requiring high performance amplification in temperatures ranging from -40 to 85°C.
NARROW BAND MEDIUM POWER; JESD-609 Code: e3; Maximum Operating Frequency: 2800 MHz; Maximum Input Power (CW): 17 dBm; Characteristic Impedance: 50 ohm; Terminal Finish: Matte Tin (Sn);
HMC994ALP5E
HMC994ALP5E by Analog Devices is a PHEMT RF amplifier with 11 dB gain, operating up to 28 GHz. It features a max supply current of 300 mA and is designed for wideband medium power applications in a surface mount package with 32 terminals.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TQP7M9103
Triquint Semiconductor
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Maximum Operating Temperature: 85 Cel; Maximum Voltage Standing Wave Ratio: 10;
Qorvo's TQP7M9103 is a wide band medium power RF amplifier with 16.6 dB gain, operating from 400 MHz to 4000 MHz. It has a max input power of 30 dBm and VSWR of 10, suitable for surface mount applications in RF & microwave systems. With a compact plastic/epoxy package, it operates b/w -40°C to 85°C temperature range.
TQP7M9102
WIDE BAND MEDIUM POWER; Minimum Operating Frequency: 400 MHz; Minimum Operating Temperature: -40 Cel; Maximum Input Power (CW): 27 dBm; Maximum Operating Frequency: 4000 MHz; Construction: COMPONENT;
WIDE BAND MEDIUM POWER; Maximum Operating Frequency: 4000 MHz; Construction: COMPONENT; Minimum Operating Frequency: 400 MHz; JESD-609 Code: e4; Terminal Finish: NICKEL PALLADIUM GOLD;
TQP7M9102-PCB2140
WIDE BAND MEDIUM POWER; JESD-609 Code: e4; Terminal Finish: NICKEL PALLADIUM GOLD;
TQP7M9102-PCB2600
TQP7M9106
WIDE BAND HIGH POWER; Minimum Operating Temperature: -40 Cel; Maximum Operating Frequency: 1500 MHz; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 30 dBm; Gain: 19 dB;
WIDE BAND HIGH POWER; Maximum Voltage Standing Wave Ratio: 10; Maximum Input Power (CW): 30 dBm; Maximum Operating Temperature: 85 Cel; Minimum Operating Frequency: 50 MHz; Construction: COMPONENT;
TQP7M9105
WIDE BAND MEDIUM POWER; Construction: COMPONENT; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 1500 MHz; Minimum Operating Temperature: -40 Cel; Minimum Operating Frequency: 50 MHz;
WIDE BAND MEDIUM POWER; Gain: 19.4 dB; Minimum Operating Frequency: 50 MHz; JESD-609 Code: e4; Maximum Operating Temperature: 85 Cel; Maximum Input Power (CW): 30 dBm;
TQP7M9101
WIDE BAND MEDIUM POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY; Technology: HYBRID; Minimum Operating Frequency: 400 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved