Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Nichicon LNC2H152MSEG is a 1500uF, 500V Aluminum Electrolytic Capacitor with 0.2 Tan Delta and 11600mA Ripple Current. It is used in applications requiring high capacitance and voltage tolerance, such as power supplies and industrial electronics.
Median Price
$55.010
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$39.263
1k+ parts
-
10k+ parts
Vyrian
Nova Conductors
Advanced Electronics
$0.221
$0.201
$0.181
Ampacity Inc.
$44.000
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Aranea Global
The aluminum wet dielectric material allows for a high energy density and reliable performance, making it a durable choice for various applications.
The low tan delta value indicates low loss in the capacitor, resulting in efficient energy storage and minimal heat generation during operation.
The low leakage current of 2.6 mA ensures that minimal energy is lost in the form of current leakage, leading to higher efficiency in the capacitor's performance.
With a capacitance of 1500 microfarads, this capacitor can store a significant amount of charge, making it suitable for applications requiring high energy storage capacity.
The high rated DC voltage of 500 volts allows this capacitor to handle high voltage applications with ease, ensuring reliable performance and safety.
Fixed Capacitors LNC2H152MSEG attributes and parameters. Explore more Fixed Capacitors devices from Nichicon
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Tan Delta:
Terminal Finish:
Terminal Shape:
LNC2H152MSEG Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00
SB
PCN Design/Specification - Mult Series Bottom Plate 08/Nov/2022
Over the last fifty years as society rapidly evolved, Nichicon has tirelessly worked on developing, manufacturing, and selling capacitors. At present, Nichicon is developing circuit products and composite parts by applying these technologies, and backed by our two pillars, "Capacitor Business" and "NECST Business", Nichicon is engaged in three core businesses of "Aluminum Electrolytic Capacitors", "Film Capacitors" and "Circuit Products". We continue to provide high value-added products and services to meet diverse and sophisticated needs around the world by focusing on four markets that are diversifying and accelerating with new key technologies: energy, ecology, and medical equipment; automotive and Railway-car related appliances; Home appliances and Industrial inverters; and information and Communications equipment.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
FDLL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Taiwan Semiconductor
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Vishay Telefunken
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0402C103K3RACAUTO
KEMET Corporation
KEMET C0402C103K3RACAUTO is a ceramic capacitor with 0.01uF capacitance, rated for 25V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it's a compact SMT component with wraparound terminals.
GRM155R61C104KA88D
Murata Manufacturing
Murata Manufacturing's GRM155R61C104KA88D is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.5mm, making it suitable for various electronic devices requiring stable capacitance in a small form factor.
GRM21BR61E226ME44L
The Murata Manufacturing GRM21BR61E226ME44L is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GRM21BR60J226ME39L
Murata Manufacturing's GRM21BR60J226ME39L is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
C0603C104M4RACTU
KEMET C0603C104M4RACTU is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm.
C2220C475K5RACAUTO
KEMET C2220C475K5RACAUTO is a ceramic capacitor with 4.7uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range, suitable for automotive applications meeting AEC-Q200 standard. With SMT package style and wraparound terminals, it offers high reliability in compact designs.
16TQC100MYF
Panasonic
Panasonic 16TQC100MYF is a Tantalum Capacitor with 100uF capacitance and 16V rated DC voltage. It features low Tan Delta of 0.10, high ripple current of 1800mA, and compact SMT package style. Ideal for applications requiring stable performance in a wide temperature range from -55 to 105°C.
ESG475M400AH2AA
Nissei Electric
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
08051C103KAT2A
KYOCERA AVX
08051C103KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 100V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
EEEFTE221XAP
Panasonic EEEFTE221XAP is a 220uF aluminum electrolytic capacitor with 25V URdc. It has a tan delta of 0.14 and ripple current of 390mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
M39006/250220
Cornell Dubilier Electronics
M39006/250220 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 220uF capacitance, 30V URdc, and 0.42 Tan Delta. It is ideal for applications requiring high ripple current handling capabilities and operates b/w -55 to 125 °C. This polarized capacitor conforms to MIL-C-39006/25 standards and features a tubular package with wire terminals for through-hole mounting.
C1206C102KGRACAUTO
C1206C102KGRACAUTO by KEMET Corp is a rectangular package ceramic capacitor with a capacitance of 0.001 uF and rated DC voltage of 2000 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in automotive applications due to its AEC-Q200 reference standard.
06035A102JAT2A
06035A102JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.001uF and rated DC voltage of 50V. With temperature coefficient of 30ppm/°C, it's ideal for applications requiring high precision and stability in a compact SMT package. Operating b/w -55 to 125 °C, it suits various electronic devices needing reliable performance.
BFC238350562
Vishay Intertechnology
Vishay Intertechnology BFC238350562 is a film capacitor with capacitance of 0.0056uF, rated DC voltage of 1600V, and rated AC voltage of 550V. It is used in applications requiring high temperature tolerance up to 105°C, such as power supplies and industrial equipment due to its polypropylene dielectric material and through-hole mounting feature.
ECEA1HN4R7U
Panasonic ECEA1HN4R7U is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for applications requiring high ripple current (30mA) and low leakage current (0.01005mA). Its cylindrical package design with through-hole mounting makes it ideal for various electronic circuits.
12065C104KAT2A
12065C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 3.2mm x 1.6mm x 0.94mm and wraparound terminals.
C1812C104K5RACTU
KEMET C1812C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
MAL202137479E3
Vishay Intertechnology's MAL202137479E3 is a 47uF aluminum electrolytic capacitor with 40V rated DC voltage. It features a tan delta of 0.11, leakage current of 0.0078mA, and ripple current of 110mA. Ideal for applications requiring high capacitance and reliability in temperatures ranging from -40 to 85°C.
EEEFK1H101P
Panasonic EEEFK1H101P is a 100uF Aluminum Electrolytic Capacitor with 50V URdc. It has a Tan Delta of 0.10 and Ripple Current of 262.5mA, suitable for automotive applications meeting AEC-Q200 standard. With -55 to 105 °C operating range, it's ideal for surface mount designs requiring compact cylindrical package.
EEEFK1C101P
Panasonic EEEFK1C101P is a 100uF aluminum electrolytic capacitor with 16V rated DC voltage. It has tan delta of 0.16 and leakage current of 0.016mA, suitable for AEC-Q200 standard automotive applications due to its compact SMT package style and high ripple current handling capability of 180mA.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LNC2V103MSEH
Nichicon
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 10000 uF; Rated DC Voltage (URdc): 350 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2V103MSEHBB
The Nichicon LNC2V103MSEHBB is a 10000uF, 350V aluminum electrolytic capacitor with tan delta of 0.2 and leakage current of 5mA. It features a cylindrical package with screw ends, suitable for chassis mounting applications requiring high ripple current handling capacity up to 25200mA.
LNC2V103MSEHBN
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 10000 uF; Rated DC Voltage (URdc): 350 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2G153MSEJ
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 15000 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2G822MSEH
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 8200 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2W152MSEF
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 1500 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2W272MSEG
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 2700 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2H103MTEJBB
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 10000 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2H103MTEJBN
LNC2H103MTEJ
LNC2H122MSEGBB
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 1200 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2H122MSEG
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 1200 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2H122MTEGBB
LNC2H152MSEGBB
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: CHASSIS MOUNT; Capacitance: 1500 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2H152MSEGBN
LNC2H152MTEGBB
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 1500 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2H152MTEGBN
LNC2H152MTEG
LNC2H182MTEGBB
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: STUD MOUNT; Capacitance: 1800 uF; Rated DC Voltage (URdc): 500 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: ALUMINUM (WET);
LNC2H182MTEGBN
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved