Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's GA355DR7GF472KW01L is a ceramic capacitor with 0.0047uF capacitance, X7R temperature characteristics, and 250V rated AC voltage. Ideal for surface mount applications in electronics due to its compact size and high operating temperature range of -55 to 125 °C.
Median Price
$0.524
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.203
100+ parts
$0.193
1k+ parts
10k+ parts
-
Farnell
$1.179
$0.888
$0.708
Mouser Electronics
$1.190
$0.547
$0.421
$0.367
DigiKey
$0.551
$0.464
Distrelec
$1.330
$0.844
$0.660
TTI Europe
$0.344
Arrow
$0.369
$0.298
Verical
$0.296
Future Electronics
$0.795
$0.775
Avnet
$0.339
$0.323
Element14
$0.606
$0.549
RS (Exports)
$1.068
Chip1Stop
$0.356
Newark
$0.441
$0.405
DF Sales Co.
$0.200
Maritex
$0.406
$0.303
$0.243
$0.188
TME
$0.580
$0.254
$0.215
Ozdisan Elektronik
$0.685
Mobius Materials
$0.780
$0.630
Nova Conductors
$0.814
Bristol Electronics
$1.875
$0.694
$0.487
Vyrian
NAC Semi
$1.590
Sensible Micro Corp
LIBRA Elektronik GmbH
IBS Electronics
$0.519
$0.512
Chip Stock
Rutronik
$0.218
$0.214
Cyclops Electronics Ltd
ComSIT Distribution GmbH
Bas Electronics GmbH & Co. KG
HZD GmbH
Dan-Mar Components
ACDS - Activité Composants Distribution Service
Speed Components Ltd
LWI Electronics Inc
Inventory MP
Pegasus Components GmbH
NPI Materials, Inc.
Martec Srl
Prism Electronics
Modulus Dynamics
$0.062
Semicontronic
$0.173
$0.169
$0.168
Corohmni
Advanced Electronics
Aztec Data Supply Inc.
$0.299
Argo Parts USA
$0.653
$0.633
CoreStaff
$2.087
$0.357
$0.313
Component Connect
Glotronic Ltd.
Abacus Technologies
GreenTree Electronics
RC Electronics
$0.800
$0.730
$0.710
Robosynatics
$0.183
$0.180
Lucentia Tech
Authorized Procurement Solutions
Continental Prestige Electronics
$0.478
$0.451
A-Z Elektronik GmbH
Futuretech Components
Kepictronics
Infinite Electronics LLP (Excess)
Alle Elektronik GmbH
Netroflash
$0.798
$0.773
$0.757
Eastek
Speed Components Ltd (Excess)
Assy Fe
Cyclops Electronics Ltd (Excess)
Ceramic dielectric material provides high stability and reliability, making this capacitor suitable for various applications.
Rectangular package shape allows for easy mounting and space-efficient placement on a circuit board.
Multi-layer design enhances capacitance value in a compact size, ideal for space-constrained applications.
TR embossed packing method ensures secure transportation and storage of the capacitors.
Having only 2 terminals simplifies the connection process during circuit assembly.
Surface-mount technology (SMT) package style provides easy and automated assembly onto PCBs.
With a high-rated AC voltage, this capacitor can handle power fluctuations and high electrical loads.
Wraparound terminal shape ensures secure and reliable solder connections on PCBs.
Having a negative tolerance of 10% ensures that the actual capacitance value does not fall below the specified value.
X7R temperature characteristics code indicates stable capacitance over a wide temperature range, making it suitable for various environments.
Capable of operating at high temperatures, offering reliability in harsh operating conditions.
Being a ceramic capacitor, it offers low losses, high insulation resistance, and high dielectric strength.
With a low temperature coefficient of 15%, this capacitor maintains stable capacitance value over a wide temperature range.
Tin over nickel terminal finish provides excellent solderability and corrosion resistance properties.
Surface-mounting feature eases the installation process on PCBs and saves space.
The specific capacitance value of 0.0047 uF makes it suitable for various filtering and decoupling applications.
Fixed Capacitors GA355DR7GF472KW01L attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated AC Voltage (URac):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
GA355DR7GF472KW01L Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.24.00.20
SB
PCN Design/Specification - GA3 series Marking 30/Sep/2022
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
Silicon Standard
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Nte Electronics
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1N4148WT
Bytesonic Electronics
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
0603YC104K4T4A
KYOCERA AVX
0603YC104K4T4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for SMT applications requiring compact size and high reliability in automotive electronics.
CL31B106KBHNNNE
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B106KBHNNNE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability.
M39006/25-0220
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 30 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
06035C104K4T2A
06035C104K4T2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, X7R temperature coefficient, and 10% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and 50V rated DC voltage.
GRM188R60J106ME47D
Murata Manufacturing
Murata Manufacturing's GRM188R60J106ME47D is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and compact SMT package style. Ideal for applications requiring high capacitance in limited space like consumer electronics and automotive systems.
C0603C472K5RACTU
KEMET C0603C472K5RACTU is a ceramic capacitor with capacitance of 0.0047uF and rated DC voltage of 50V. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability. Its multi-layer design and wraparound terminals ensure stable performance in various electronic circuits.
08051C103KAT2A
08051C103KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 100V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GCM155C71A105KE38D
Murata Manufacturing's GCM155C71A105KE38D is a 0402 SMT ceramic capacitor with 1uF capacitance, X7S temp code, and 10V URdc. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating range.
06035C102K4T2A
06035C102K4T2A by KYOCERA AVX is a ceramic capacitor with 0.001uF capacitance, rated for 50V DC voltage. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for automotive applications meeting AEC-Q200 standard. Its compact SMT package makes it suitable for space-constrained designs requiring reliable performance.
GRM31CR61E226KE15L
Murata Manufacturing's GRM31CR61E226KE15L is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C. Ideal for surface mount applications in electronics due to its compact size and high reliability.
ESG475M400AH2AA
Nissei Electric
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
GRM32ER71H475KA88L
GRM32ER71H475KA88L by Murata Manufacturing is a ceramic capacitor with a capacitance of 4.7 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
VJ0805Y104KXACW1BC
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
EEEFT1V561AP
Panasonic
Panasonic EEEFT1V561AP is a 560uF aluminum electrolytic capacitor with 35V rated DC voltage. It features tan delta of 0.12, leakage current of 0.196mA, and ripple current of 833mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
C0603C104M5RACTU
KEMET C0603C104M5RACTU is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±20% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact size of 1.6x0.8x0.8mm.
12103D226MAT2A
12103D226MAT2A by KYOCERA AVX is a ceramic capacitor with a capacitance of 22 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
EEVFK1J221Q
Panasonic EEVFK1J221Q is a 220uF Aluminum Electrolytic Capacitor with 63V URdc. It features low Tan Delta of 0.08 and high Ripple Current of 600mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
C0402C105K8PACTU
KEMET C0402C105K8PACTU is a ceramic capacitor with 1uF capacitance, 10V URdc. X5R temperature code, -55 to 85°C operating range. Ideal for SMT applications due to its small size (1x0.5x0.5mm) and high reliability in various electronic circuits.
ECPU1C105MA5
Panasonic ECPU1C105MA5 is a 1uF film capacitor with 16V URdc. It has -40 to 85 °C operating temperature range and ±20% tolerance. Ideal for SMT applications due to its compact 1210 size, WRAPAROUND terminals, and PLASTIC dielectric material.
CL21C101JBANNNC
Samsung Electro-mechanics' CL21C101JBANNNC is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high precision and stability in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GA355QR7GF222KW01L
Murata Manufacturing's GA355QR7GF222KW01L is a ceramic capacitor with 0.0022uF capacitance, rated at 250V AC. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for surface mount applications requiring high reliability and stability.
GA352QR7GF102KW01L
GA352QR7GF102KW01L by Murata Manufacturing is a rectangular package ceramic capacitor with a capacitance of 0.001 uF. It has a rated AC voltage of 250 V and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
GA355DR7GB223KW01L
Murata Manufacturing's GA355DR7GB223KW01L is a ceramic capacitor with capacitance of 0.022 uF, rated at 250V AC. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for surface mount applications requiring high reliability and stability.
GA355XR7GB563KW06L
Murata Manufacturing's GA355XR7GB563KW06L is a ceramic capacitor with 0.056 uF capacitance, X7R temperature characteristics, and 250 V rated AC voltage. Ideal for surface mount applications in electronics requiring stable performance across -55 to 125 °C temperatures.
GA355ER7GB333KW01L
Murata Manufacturing's GA355ER7GB333KW01L is a ceramic capacitor with 0.033 uF capacitance, rated for 250V AC. Its X7R temperature characteristics make it suitable for applications requiring -55 to 125 °C operating temperatures. With SMT package style and wraparound terminals, it is ideal for surface mounting in various electronic devices.
GA355QR7GB103KW01L
Murata Manufacturing's GA355QR7GB103KW01L is a ceramic capacitor with 0.01uF capacitance, X7R temperature characteristics, and 250V rated AC voltage. Ideal for surface mount applications in electronics requiring stable performance across temperatures from -55 to 125°C.
GA355DR7GB223KY02L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .022 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Minimum Operating Temperature: -55 Cel;
GA352QR7GF471KW01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00047 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Size Code: 2211;
GA355QR7GF332KW01L
Murata Manufacturing's GA355QR7GF332KW01L is a ceramic capacitor with 0.0033 uF capacitance, X7R temperature characteristics, and 250 V rated AC voltage. Ideal for surface mount applications in electronics requiring stable performance across -55 to 125 °C temperatures.
GA355DR7GB103KY02L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Minimum Operating Temperature: -55 Cel;
GA352QR7GF152KW01L
Murata Manufacturing's GA352QR7GF152KW01L is a ceramic capacitor with 0.0015uF capacitance, rated at 250V AC. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for surface mount applications requiring high reliability and stability.
GA355DR7GF472KW01K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0047 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Length: 5.7 mm;
GA355XR7GB333KY06L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .033 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Package Style (Meter): SMT;
GA355DR7GC221KY02L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00022 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Size Code: 2220;
GA355DR7GC472KY02L
GA355DR7GC472KY02L by Murata Manufacturing is a rectangular package ceramic capacitor with a capacitance of 0.0047 uF. It has a rated AC voltage of 250 V and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
GA352QR7GF681KW01L
Murata Manufacturing's GA352QR7GF681KW01L is a ceramic capacitor with 0.00068 uF capacitance, rated at 250V AC. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for surface mount applications requiring high reliability and stability.
GA355ER7GB473KW01L
Murata Manufacturing's GA355ER7GB473KW01L is a ceramic capacitor with 0.047 uF capacitance, rated for 250V AC. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability.
GA355DR7GC222KY02L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0022 uF; Rated DC Voltage (URdc): 250 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GA355QR7GB153KW01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .015 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Package Shape: RECTANGULAR PACKAGE;
GA355DR7GC681KY02L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00068 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Multi-layer: Yes;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved