Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Transistor Application: SWITCHING; Maximum Pulsed Drain Current (IDM): 240 A; Terminal Position: SINGLE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
ACDS - Activité Composants Distribution Service
AZTECH Wire
$4.580
One Stop Electronics
$27.050
QUARKTWIN TECHNOLOGY LTD
UNI Independent Distributors
Corphita
Supply Digital
Perfect Parts
Cyclops Electronics Ltd (Excess)
Power Field Effect Transistors (FET) PHP75NQ08T,127 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Nexperia
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
PHP75NQ08T,127 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - All Dev Label Update 15/Dec/2020
Founded in 2017, Nexperia is a leading provider of semiconductors, based out of Nijmegen, the Netherlands. It is owned by the partially state-owned Chinese company Wingtech Technology. With factories in Hamburg, Germany and Greater Manchester, England, Nexperia is able to provide its clients with high quality semiconductor products quickly and efficiently.On November 8, 2023, Vishay and Nexperia BV announced that they have entered into an agreement whereby Vishay will acquire Nexperia’s wafer fabrication facility and operations located in Newport, South Wales, U.K. for approximately $177,000 in cash, subject to customary post-closing adjustments. On November 8, 2023, Vishay remitted $8,750 to an escrow account as a deposit for the acquisition. Such amount is included within "Purchase of and deposits for businesses, net of cash acquired" on the consolidated statement of cash flows. To effect the transaction, Vishay will acquire a 100% interest in the legal entity Neptune 6 Limited, and its wholly-owned operating subsidiary, Nexperia Newport Limited, which owns and operates the Newport facility. The closing of the transaction is subject to U.K. government review and customary closing conditions, and is expected to occur in the first quarter of 2024.
CEO
Xuezheng Zhang (Wing)
CFO
Stefan Tilger
COO
Achim Kempe
Hamburg
Fabrication
Fab Initiation
1981
Germany
Wafer Capacity
36,000
Manchester (8-inch line)
2017
Australia
Hazelgrove
12,000
Manchester (6-inch line)
1998
22,000
Shanghai Fab
2022
China
Shanghai
Nexperia Newport
UK
Newport
34,000
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
Micropac Industries
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Eic Semiconductor
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
AUIRF540Z
Infineon Technologies
AUIRF540Z by Infineon Technologies is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for switching applications. It features 140A max pulsed drain current and 0.0265 ohm max drain-source resistance. Operating in enhancement mode, it has a 175°C max temp rating and 92W power dissipation capability.
STP11NK50Z
STP11NK50Z by STMicroelectronics is a N-CHANNEL FET with 500V DS breakdown voltage, ideal for switching applications. It features 40A max pulsed drain current and 0.52 ohm max drain-source resistance. Operating in enhancement mode, it has a power dissipation of 125W and can withstand up to 150°C temperature.
IRF640SPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 130 W; Case Connection: DRAIN; Operating Mode: ENHANCEMENT MODE;
FQD3P50TM
FQD3P50TM by Onsemi is a P-CHANNEL Power FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features 8.4A Max Pulsed Drain Current, 250mJ Avalanche Energy Rating, and 4.9 ohm Max Drain-Source Resistance. This ENHANCEMENT MODE transistor operates at up to 150°C and has a compact SMALL OUTLINE package style for efficient power dissipation.
ZXMP10A18KTC
Zetex Plc
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PSSO-G2; Package Shape: RECTANGULAR; Maximum Drain-Source On Resistance: .15 ohm;
JANTX2N6796U
International Rectifier Hirel Products
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): NOT SPECIFIED; Transistor Application: SWITCHING; Minimum DS Breakdown Voltage: 100 V;
FDD4141_F085
Fairchild Semiconductor
FDD4141_F085 by Fairchild Semiconductor is a P-CHANNEL Power FET with 40V DS Breakdown Voltage and 100A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating from -55 to 150 °C, this MOSFET has 0.0123 ohm Drain-Source On Resistance.
IRF640NSTRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Maximum Drain Current (ID): 18 A; Peak Reflow Temperature (C): 260;
Defense Logistics Agency
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-CQCC-N15; Maximum Pulsed Drain Current (IDM): 32 A; Operating Mode: ENHANCEMENT MODE;
IRF640
Vishay Intertechnology
Vishay Intertechnology's IRF640 is a N-CHANNEL Power FET with 200V DS Breakdown Voltage and 72A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 125W and operates in ENHANCEMENT MODE. Suitable for various electronic devices requiring high current switching capabilities.
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
IRFB4115PBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 380 W; Avalanche Energy Rating (EAS): 830 mJ; Maximum Drain Current (Abs) (ID): 104 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Minimum Operating Temperature: -55 Cel; No. of Elements: 1;
IRLML6401TR
IRLML6401TR by International Rectifier is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features 34A IDM, 33mJ EAS, and 0.05 ohm RDS(ON). With ENHANCEMENT MODE operation and GULL WING terminals, it offers efficient performance in a SMALL OUTLINE package.
IRFR4104TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 140 W; JESD-30 Code: R-PSSO-G2; Maximum Drain-Source On Resistance: .0055 ohm;
IRLML5203TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; No. of Elements: 1; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FQP27P06_SW82127
FQP27P06_SW82127 by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 108A IDM. Ideal for SWITCHING applications, it features a single configuration with built-in diode and operates in ENHANCEMENT MODE. With a max power dissipation of 120W, this transistor has a -55 to 175 °C operating temperature range.
IRF7842TRPBF
Infineon's IRF7842TRPBF is a N-CHANNEL FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 140A IDM, 50mJ EAS, and 0.005 ohm RDS(on). Operating from -55 to 150 °C, it has a small outline package with GULL WING terminals for surface mount assembly.
LTC4451AV#TRMPBF
Analog Devices
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 4; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260;
IPB64N25S320ATMA1
Infineon's IPB64N25S320ATMA1 is a N-CHANNEL FET with 250V DS breakdown voltage, 64A max drain current, and 0.02 ohm RDS(on). Ideal for automotive applications due to AEC-Q101 standard compliance and 256A IDM rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BUK7S0R7-40H
Nexperia
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
74AVC8T245BQ
BUS TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR;
PSMNR51-25YLH
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: Tin (Sn);
PNE20030EP
PSMNR70-30YLH
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
PESD3V3T1BL
PESD2V8R1BSF
NXB0104BQ
BUS TRANSCEIVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
MJD32C
Power Bipolar Transistors; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260;
74AUP1G17GX4
BUFFER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
PUSB3BB2DF
NCR321PAS
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
GAN041-650WSB
Power Field-Effect Transistors; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Tin (Sn);
NCR320U
LED DISPLAY DRIVER; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
GAN063-650WSA
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
NXS0104PW-Q100
BUS TRANSCEIVER; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag); Moisture Sensitivity Level (MSL): 1;
MJD31CA
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): 3 A;
MJD45H11
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 80 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A;
NCR421PAS
LED DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: RECTANGULAR;
BCP56H
Small Signal Bipolar Transistors; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
PHP79NQ08LT,127
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Minimum DS Breakdown Voltage: 75 V; Terminal Finish: TIN; Maximum Drain Current (ID): 73 A;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 157 W; Maximum Operating Temperature: 175 Cel; Terminal Finish: TIN;
PHP71NQ03LT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Transistor Application: SWITCHING; No. of Elements: 1;
PHP71NQ03LT,127
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; No. of Terminals: 3; Terminal Finish: MATTE TIN;
PHP73N06T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 166 W; Package Shape: RECTANGULAR; No. of Terminals: 3;
PHP73N06T,127
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 166 W; Maximum Pulsed Drain Current (IDM): 266 A; JESD-30 Code: R-PSFM-T3;
PHP75NQ08T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 157 W; Minimum DS Breakdown Voltage: 75 V; Operating Mode: ENHANCEMENT MODE;
PHP75NQ08T,127
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 157 W; No. of Terminals: 3; Transistor Element Material: SILICON;
PHP78NQ03LT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 93 W; Terminal Form: THROUGH-HOLE; Maximum Operating Temperature: 175 Cel;
PHP78NQ03LT,127
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 93 W; Maximum Operating Temperature: 175 Cel; No. of Terminals: 3;
PHP79NQ08LT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 157 W; Package Style (Meter): FLANGE MOUNT; No. of Terminals: 3;
PHP7N40E
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Transistor Application: SWITCHING; Additional Features: FAST SWITCHING;
PHP7N40E127
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Avalanche Energy Rating (EAS): 290 mJ; No. of Elements: 1;
PHP7N60E
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Package Body Material: PLASTIC/EPOXY; No. of Elements: 1;
PHP7N60E127
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Case Connection: DRAIN; JESD-30 Code: R-PSFM-T3;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Position: SINGLE; Package Body Material: PLASTIC/EPOXY; Operating Mode: ENHANCEMENT MODE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Case Connection: DRAIN; Transistor Element Material: SILICON;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved