Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUS TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$0.244
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$0.157
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.550
$0.299
$0.254
$0.233
Future Electronics
$0.160
Verical
RS (Exports)
$0.327
$0.296
Rochester
$0.466
$0.386
$0.344
Digiode
$0.167
Nova Conductors
$0.274
TME
$0.650
Freelance Electronics
$2.550
$2.678
$2.524
Chip Stock
NAC Semi
$0.235
Magnum Semiconductors LLP
IBS Electronics
$0.207
Vyrian
VNN
Global Solutions Electronics Company
Sensible Micro Corp
$0.175
$0.162
Anansix
Semicontronic
$0.127
$0.124
$0.123
Ampacity Inc.
Corphita
$0.158
AZTECH Wire
$0.230
$0.220
$0.210
Argo Parts USA
$0.266
Microchip USA
$1.697
Advanced Electronics
$11.690
$11.106
Modulus Dynamics
$18.096
Corohmni
$19.251
Aztec Data Supply Inc.
$20.700
GreenTree Electronics
Eastek
$0.240
iodParts Technologies Inc.
UNI Independent Distributors
Perfect Parts
Supply Digital
Authorized Procurement Solutions
Glotronic Ltd.
Robosynatics
Lucentia Tech
$22.312
$21.856
Futuretech Components
Andel Nordic
Netroflash
$0.269
$0.260
$0.255
Bus Driver & Transceivers 74LVC245AD,118 attributes and parameters. Explore more Bus Driver & Transceivers devices from Nexperia
Additional Features:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Logic IC Type:
Moisture Sensitivity Level (MSL):
No. of Bits:
No. of Functions:
No. of Ports:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Polarity:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Propagation Delay (tpd):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
74LVC245AD,118 Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Logo Marking Update 30/Nov/2016 Mult Device Part Marking Add 30/Sep/2017
PCN Assembly/Origin - Mult Dev Fab Site Add 24/Dec/2020
PCN Packaging - All Dev Label Chgs 2/Aug/2020 Label Chg 12/Mar/2017
Founded in 2017, Nexperia is a leading provider of semiconductors, based out of Nijmegen, the Netherlands. It is owned by the partially state-owned Chinese company Wingtech Technology. With factories in Hamburg, Germany and Greater Manchester, England, Nexperia is able to provide its clients with high quality semiconductor products quickly and efficiently.On November 8, 2023, Vishay and Nexperia BV announced that they have entered into an agreement whereby Vishay will acquire Nexperia’s wafer fabrication facility and operations located in Newport, South Wales, U.K. for approximately $177,000 in cash, subject to customary post-closing adjustments. On November 8, 2023, Vishay remitted $8,750 to an escrow account as a deposit for the acquisition. Such amount is included within "Purchase of and deposits for businesses, net of cash acquired" on the consolidated statement of cash flows. To effect the transaction, Vishay will acquire a 100% interest in the legal entity Neptune 6 Limited, and its wholly-owned operating subsidiary, Nexperia Newport Limited, which owns and operates the Newport facility. The closing of the transaction is subject to U.K. government review and customary closing conditions, and is expected to occur in the first quarter of 2024.
CEO
Xuezheng Zhang (Wing)
CFO
Stefan Tilger
COO
Achim Kempe
Hamburg
Fabrication
Fab Initiation
1981
Germany
Wafer Capacity
36,000
Manchester (8-inch line)
2017
Australia
Hazelgrove
12,000
Manchester (6-inch line)
1998
22,000
Shanghai Fab
2022
China
Shanghai
Nexperia Newport
UK
Newport
34,000
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06030000Z0EAHP
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
CLVC1G125MDCKREPG4
CLVC1G125MDCKREPG4 by Texas Instruments is a 3-STATE bus driver with a propagation delay of 4.9 ns at 1.8V, suitable for applications requiring fast signal transmission. It features a load capacitance of 50 pF and operates within a temperature range of -55 to 125°C, making it ideal for military-grade electronics in compact designs. With surface mount capability and dual terminal position, this CMOS technology device offers reliable performance in space-constrained environments.
SN74LVC2T45DCTRE4
SN74LVC2T45DCTRE4 by Texas Instruments is a 2-bit bus driver with 17.7 ns propagation delay at 1.8V, suitable for industrial applications. It features a small outline package with dual terminals and operates within a temperature range of -40 to 85°C. This CMOS technology device supports bidirectional communication with common control, making it ideal for various electronic systems requiring low-profile transceivers.
CD74HCT245M
General Electric Solid State
Bus Driver/Transceivers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
74HC244D,653
NXP Semiconductors
NXP Semiconductors' 74HC244D,653 is a CMOS bus driver with 2 functions, 4 bits, and 3-STATE output. It operates at -40 to 125 °C with a propagation delay of 33 ns at Vsup of 5V. Ideal for automotive applications due to its small outline package and low power consumption.
SN74LVCC3245ADWRE4
SN74LVCC3245ADWRE4 by Texas Instruments is an 8-bit bus driver with 3V & 3/5V translation, featuring a propagation delay of 7.6 ns and operating temperature range of -40 to 85 °C. Ideal for bidirectional applications requiring common control, this IC has a small outline package style and supports surface mount installation.
74CBTLV3257PW,118
NXP Semiconductors' 74CBTLV3257PW,118 is a 4-bit bus driver with 0.25 ns propagation delay at 2.5V, suitable for automotive applications. It features a small outline package with dual terminals and true output polarity, making it ideal for bidirectional control in tight spaces. With a max operating temperature of 125°C and low power supply current of 0.05 mA, this CMOS technology device offers reliable performance in demanding environments.
NC7SZ125P5X
The Onsemi NC7SZ125P5X is a 5-terminal bus driver with a propagation delay of 11.5 ns and operates at a nominal voltage of 1.8V. It features a small outline package, suitable for industrial applications requiring true output polarity and low enable control type in compact designs.
NC7WZ125K8X
The Onsemi NC7WZ125K8X is a 2-function bus driver with a propagation delay of 6ns at 1.8V, suitable for industrial applications. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 5.5V, making it ideal for use in compact electronic devices requiring fast signal transmission.
74LVX4245MTCX
Fairchild Semiconductor
BUS TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
74HCT1G125GW,165
NXP Semiconductors' 74HCT1G125GW,165 is a CMOS Bus Driver with 36ns Propagation Delay and 3-STATE Output. Operating b/w -40 to 125 °C, it has a supply voltage range of 4.5V to 5.5V. Ideal for automotive applications due to its small form factor and dual terminal position.
74HC1G126GW,125
NXP Semiconductors' 74HC1G126GW,125 is a CMOS bus driver with 5 terminals and 3-STATE output. It operates b/w -40 to 125 °C, with a propagation delay of 150 ns at Vsup of 5V. Ideal for automotive applications due to its small form factor and true output polarity.
SN74AHCT1G125DBVR
SN74AHCT1G125DBVR by Texas Instruments is a bus driver with 8.5ns propagation delay, suitable for automotive applications. It operates at 5V with 50pF load capacitance and features a small outline package style. With dual terminal position and true output polarity, it offers 3-state output characteristics for efficient signal transmission.
SN74LVC1T45DCKRG4
Texas Instruments SN74LVC1T45DCKRG4 is a bus driver with 17.7 ns propagation delay, operating at 1.8V and supporting 3.3V power supplies. It features a small outline package suitable for bidirectional applications in industrial settings with a temperature range of -40 to 85°C.
74ALVC164245DL,118
Nexperia
BUS TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: SSOP; Package Shape: RECTANGULAR;
SN74LV1T125DBVR
SN74LV1T125DBVR by Texas Instruments is a 3-STATE bus driver with 9 ns propagation delay, suitable for automotive applications. It operates at a nominal voltage of 1.8V and supports translation b/w 1.8V and 5V systems, making it ideal for low-power designs in compact spaces. With a small outline package style and surface mount capability, it offers high performance in a space-efficient form factor.
74HCT125D,653
NXP Semiconductors' 74HCT125D,653 is a CMOS bus driver with 4 functions and 3-STATE output. It operates at a supply voltage of 5V, has a propagation delay of 38ns, and can handle up to 6A current. Ideal for automotive applications due to its temperature grade and small outline package style.
SN74LVC126APWRG4
SN74LVC126APWRG4 by Texas Instruments is a 4-function bus driver with a propagation delay of 6ns at 1.8V, suitable for automotive applications. It features a max I (ol) of 24A, operates b/w -40 to 125°C, and has a terminal pitch of 0.65mm. This CMOS technology device supports true output polarity and has a package style of small outline, thin profile, shrink pitch.
SN54LS374J
BUS DRIVER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
SN74HCT245DWE4
SN74HCT245DWE4 by Texas Instruments is an 8-bit bus driver with a propagation delay of 28 ns at 5V. It features a 3-STATE output and operates in industrial temperature range (-40 to 85 °C). Commonly used for bidirectional data transfer in various electronic applications.
CD74HCT125E
Thomson Consumer Electronics
BUS DRIVER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GAN063-650WSA
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
BUK7S0R7-40H
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
NXB0104BQ
BUS TRANSCEIVER; JESD-609 Code: e4; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
BUK7V4R2-40H
PESD2V8R1BSF
BCP53H
Small Signal Bipolar Transistors; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
NCR320U
LED DISPLAY DRIVER; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
PESD3V3T1BL
MJD31CA
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): 3 A;
PSMNR51-25YLH
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: Tin (Sn);
74LV1T08GW
AND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
74HC4053PW
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BUK9K13-60RA
Power Field-Effect Transistors; JESD-609 Code: e3; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1;
LSF0102DC
Level Translators; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag); JESD-609 Code: e4;
BAS21TH
PMEG120G20ELR
PMEG050T150EIPD
BAS16TH
PMH260UNE
Small Signal Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
PNE20010ER
National Semiconductor
74LVX4245MTCX by Onsemi is an 8-bit bus driver with a propagation delay of 10 ns at 3.3V, suitable for bidirectional applications. It operates b/w -40 to 85°C, translating signals b/w 3V and 5V with a max I (ol) of 24 Amp, making it ideal for industrial settings requiring fast signal transmission.
74LVX3245MTCX
74LVX3245MTCX by Onsemi is an 8-bit bus driver with a propagation delay of 8.5ns, supporting voltage translation b/w 3V and 5V. It operates at a nominal voltage of 3.3V, has a load capacitance of 50pF, and features a small outline package suitable for industrial applications.
74LVC1T45GW,125
NXP Semiconductors' 74LVC1T45GW,125 is a CMOS bus driver with 3-STATE output and bidirectional control. It operates at a supply voltage range of 1.2V to 5.5V, with a max current of 24A and propagation delay of 23.5ns. Ideal for automotive applications due to its small form factor and wide temperature range capabilities.
BUS TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
74LVXC3245MTCX
74LVXC3245MTCX by Onsemi is an 8-bit bus driver with a propagation delay of 9ns at a nominal voltage of 3.3V, suitable for bidirectional applications. It features translation b/w 3V and 3/5V, operates in industrial temperature range (-40 to +85 °C), and has a max I (ol) of 24Amp.
74LVC1G125GW-Q100
BUS DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
NXP Semiconductors' 74LVC1G125GW-Q100 is a CMOS bus driver with 6ns propagation delay, suitable for automotive applications. It operates at 3.3V, has a load capacitance of 50pF, and features a max I (ol) of 24Amp. This small outline package with dual terminals is AEC-Q100 compliant and supports TRUE output polarity.
74LVC1G125GW,125
NXP Semiconductors' 74LVC1G125GW,125 is a CMOS bus driver with 6 ns propagation delay and 24 Amp max I (ol). It operates at -40 to 125 °C and supports a load capacitance of 50 pF. Ideal for automotive applications due to its small outline package style and true output polarity.
74LVX3245MTC
74LVX3245MTC by Onsemi is an 8-bit bus driver with a propagation delay of 9ns, supporting voltage translation b/w 3V and 5V. It operates at a nominal voltage of 3.3V, with a max I (ol) of 24Amp. Ideal for bidirectional applications in industrial settings due to its compact size and low power consumption.
74LVC1G125GW
NXP Semiconductors' 74LVC1G125GW is a CMOS bus driver with 6ns propagation delay, suitable for automotive applications. It operates at a nominal voltage of 3.3V and features a max I (ol) of 24Amp, making it ideal for driving signals in compact electronic systems. The device comes in a small outline package with dual terminals and supports surface mount installation.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved